AutoSpeed adds another offering for the B5, RS6 Turbo Package...
12-05-2007, 05:22 PM
#1
Banned
Thread Starter
Join Date: Jun 2005
Posts: 1,744
Likes: 0
Received 0 Likes
on
0 Posts
AutoSpeed adds another offering for the B5, RS6 Turbo Package...
When the K03 Lady comes calling, and she will with that oh sooo whiny voice... there are many choices out there for the enthusiast.
Some of you know we offer mild to wild turbo setups for this incredible platform. Of course we have our standard K04 package, and then there are our GT setups, but for most, especially previously modded customers, the pricing is difficult to justify considering much of the hardware must be replaced.
We recently decided to fill in the gap for power hungry K03 and K04 junkies who already have downpipes, manifolds and the like.
Introducing ASP RS6 Turbos...
<img src="http://www.autospeed.us/pics/rs6-3.jpg">
These turbos are straight factory Borg KKK RS6 units. The centers are <B>UNTOUCHED</B>. The hot sides are modified to allow <b>DIRECT</b> fit of your existing downpipes. The Wastegates are relocated and preloaded by ASP to our specification using a highly accurate digital pressure gauge and depth indicators.
<img src="http://www.autospeed.us/pics/rs6-4.jpg">
These units will bolt right up to the existing Oil and coolant lines.
The inlet tubes are RS4 units that are unmodified.
<img src="http://www.autospeed.us/pics/rs6-2.jpg">
We are finishing up the first install and will be tuning the setup on our AWD Mustang Dyno. I am expecting approx. 475-500whp on pump 93 octane.
<img src="http://www.autospeed.us/pics/dyno.jpg">
Pricing is slated to be $7299 for the entire kit. It consists of:
[2] RS6 Turbos
[1] MAF Housing
[1] RS4 MAF Hose
[6] 630cc Injectors
[4] Rail Spacers
[4] RS4 Inlet Tubes
[1] Turbo Hardware Package
[1] Silicon Hose Package
[1] Clamp Package
[1] Motorsports Fuel Pump, Basket and Strainer
[6] Spark Plugs
[1] Engine Coolant Sensor
[1] N75 Valve
[1] Software Including 91, 93, 109, Valet and Antitheft Modes (SpeedSWITCH) controlled by your laptop
<img src="http://www.autospeed.us/pics/SpeedSWITCH.jpg">
Our dyno is functional and we are currently taking appointments. BTW our fan is ridiculous, it wails at 40,000cfm @ 70mph =) It allows back to back runs at 1 minute intervals with less the 1-3whp deviations.
As many know we recently moved and we are still finishing with the logistical nightmare of relocating our entire operation. It has been an amazing amount of work but we are pleased with our new home.
Here's a shot of our ASP designed and built mezzanine...
<img src="http://www.autospeed.us/pics/mezz.jpg">
Welding AREA (Pardon the mess, LOL)...
<img src="http://www.autospeed.us/pics/weld.jpg">
I will post more pics in the next coming weeks as we finalize the digs.
On a serious note...
I would like to apologize to many folks who have had trouble contacting us over the last few weeks. We do not take this matter lightly and are doing our best to get things ramped up in terms of feedback and support. Please contact us at 856.772.9500 and <b>LEAVE A MESSAGE IF WE DO NOT PICKUP</b>. We will return calls as they are received.
Thanks for all your support and stay tuned for our holiday specials!
Some of you know we offer mild to wild turbo setups for this incredible platform. Of course we have our standard K04 package, and then there are our GT setups, but for most, especially previously modded customers, the pricing is difficult to justify considering much of the hardware must be replaced.
We recently decided to fill in the gap for power hungry K03 and K04 junkies who already have downpipes, manifolds and the like.
Introducing ASP RS6 Turbos...
<img src="http://www.autospeed.us/pics/rs6-3.jpg">
These turbos are straight factory Borg KKK RS6 units. The centers are <B>UNTOUCHED</B>. The hot sides are modified to allow <b>DIRECT</b> fit of your existing downpipes. The Wastegates are relocated and preloaded by ASP to our specification using a highly accurate digital pressure gauge and depth indicators.
<img src="http://www.autospeed.us/pics/rs6-4.jpg">
These units will bolt right up to the existing Oil and coolant lines.
The inlet tubes are RS4 units that are unmodified.
<img src="http://www.autospeed.us/pics/rs6-2.jpg">
We are finishing up the first install and will be tuning the setup on our AWD Mustang Dyno. I am expecting approx. 475-500whp on pump 93 octane.
<img src="http://www.autospeed.us/pics/dyno.jpg">
Pricing is slated to be $7299 for the entire kit. It consists of:
[2] RS6 Turbos
[1] MAF Housing
[1] RS4 MAF Hose
[6] 630cc Injectors
[4] Rail Spacers
[4] RS4 Inlet Tubes
[1] Turbo Hardware Package
[1] Silicon Hose Package
[1] Clamp Package
[1] Motorsports Fuel Pump, Basket and Strainer
[6] Spark Plugs
[1] Engine Coolant Sensor
[1] N75 Valve
[1] Software Including 91, 93, 109, Valet and Antitheft Modes (SpeedSWITCH) controlled by your laptop
<img src="http://www.autospeed.us/pics/SpeedSWITCH.jpg">
Our dyno is functional and we are currently taking appointments. BTW our fan is ridiculous, it wails at 40,000cfm @ 70mph =) It allows back to back runs at 1 minute intervals with less the 1-3whp deviations.
As many know we recently moved and we are still finishing with the logistical nightmare of relocating our entire operation. It has been an amazing amount of work but we are pleased with our new home.
Here's a shot of our ASP designed and built mezzanine...
<img src="http://www.autospeed.us/pics/mezz.jpg">
Welding AREA (Pardon the mess, LOL)...
<img src="http://www.autospeed.us/pics/weld.jpg">
I will post more pics in the next coming weeks as we finalize the digs.
On a serious note...
I would like to apologize to many folks who have had trouble contacting us over the last few weeks. We do not take this matter lightly and are doing our best to get things ramped up in terms of feedback and support. Please contact us at 856.772.9500 and <b>LEAVE A MESSAGE IF WE DO NOT PICKUP</b>. We will return calls as they are received.
Thanks for all your support and stay tuned for our holiday specials!
