PhunkFX

I just fixed a major boost leak, but I still have a loud loud disturbing noise when my car reaches 10psi or more.

Also when pulling hard the ABS light comes on and I get these codes:

Monday,16,July,2007,21:20:03:00500
VAG-COM Version: Release 704.1

Address 03: ABS Brakes
Control Module Part Number: 8D0 907 389 E
Component and/or Version: ABS/ESP allrad D56
Software Coding: 04395
Work Shop Code: WSC 06435
2 Faults Found:

00778 - Steering Angle Sensor (G85)
27-10 - Implausible Signal - Intermittent
18265 - Load Signal: Error Message from ECU
P1857 - 35-00 - -


What do those mean?

I am also still getting this code, its an ECS maf about 3 months old??


Monday,16,July,2007,21:24:32:00500
VAG-COM Version: Release 704.1

Address 01: Engine
Control Module Part Number: 8D0 907 551 M
Component and/or Version: 2.7l V6/5VT G 0002
Software Coding: 06711
Work Shop Code: WSC 63351
1 Fault Found:

16487 - Mass Air Flow Sensor (G70): Signal too High
P0103 - 35-10 - - - Intermittent

Readiness: 0010 0101


I took a log of 3rd from 3k to whatever the car would let me go, it must throttle cut or bog me out. Please look and anyone with any advise please lend a hand. Thank you.<ul><li><a href="http://www.phunkfx.dyndns.org/logs/log-rh.csv">Download the log.</a></li></ul>

PhunkFX

Please help.

FTW

what file are you running. Thats alot of g/s then you throttle cut.

PhunkFX

APR sometihng or other.