I have to ask
#1
I have to ask
I have found a 5000t fwd motor with exhaust main and turbo for cheap.... I was wondering if the manifold would bolt to a 1989 90 20V head. I think I read some place that it will but you have to move the bat. And been a tie rod to get it fit. I'm new to audis so be nice I'm sure this is a dum ?? and I know about compression and fuel and what I'll need there more fuel less compression.
Chris
Chris
#4
That will never work unfortunately. You are going to need 20v parts. Those are 10v.
The manifolds are completely differant. If you want to do this, go to audifans.com and search for a '92-94 S4 '95 S6 or '91(only) 200 exhaust manifold. They cost about $75-100. Then you need a compression dropping headgasket from 034efi.com(about $100 IIRC). Also, look for a k24 turbo on audifans as well($150-250). You're going to need a bunch of other parts, including the intake manifold, oil lines, boost hoses, intercooler, throttle body. It gets exspensive real fast. That's why I suggest just buying an 20vt 200/s4/s6 as they don't cost that muc anymore. You also have to remember that you are going to need engine management. You have to decide if you want stock engine management or stand alone. Both are exspensive and the stand alone is not easy to program.
I hope that helped?
I hope that helped?
Thread
Thread Starter
Forum
Replies
Last Post
Afterthought
Audi 90 / 80 / Coupe quattro / Cabriolet
8
11-29-2005 07:36 PM
AlwaysAudi
12v V6 Discussion
12
01-09-2005 06:59 PM