B7 won't start error 17925
12-20-2010, 02:51 AM
#1
Audiworld Junior Member
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
B7 won't start error 17925
I can't find error code 17925 / P1517 in ross-tech wiki. Anyone can tell what is the meaning of this fault codes / symptoms / fixes?
12-20-2010, 07:12 AM
#2
AudiWorld Super User
Main Relay Circ. Electrical Malfunction,
there is a relay problem , that powers everything in your car , could be a fuse as well, check all the fuses first, maybe one could be blown
contact local dealer have them tow the car for free and they will fix this under warranty you have
there is a relay problem , that powers everything in your car , could be a fuse as well, check all the fuses first, maybe one could be blown
contact local dealer have them tow the car for free and they will fix this under warranty you have
12-20-2010, 06:43 PM
#4
AudiWorld Super User
so what is the year a model ?
the fuses are inside the cabin,
the relays are located inside the box where the ECU is located , and behind the knee bolster you need to drop trim to access it
you need to get repair manual for your vehicle it will tell you all the locations of each relay and fuses ,
the fuses are inside the cabin,
the relays are located inside the box where the ECU is located , and behind the knee bolster you need to drop trim to access it
you need to get repair manual for your vehicle it will tell you all the locations of each relay and fuses ,
12-20-2010, 06:59 PM
#5
Audiworld Junior Member
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
so what is the year a model ?
the fuses are inside the cabin,
the relays are located inside the box where the ECU is located , and behind the knee bolster you need to drop trim to access it
you need to get repair manual for your vehicle it will tell you all the locations of each relay and fuses ,
the fuses are inside the cabin,
the relays are located inside the box where the ECU is located , and behind the knee bolster you need to drop trim to access it
you need to get repair manual for your vehicle it will tell you all the locations of each relay and fuses ,
Can I purchased the relay off the web or only dealer has it...?
12-21-2010, 09:29 AM
#6
AudiWorld Super User
first you need to find out which relay is bad, not all of them are the same, each has different AMP and design and price is different , once you find bad relay, each relay has part# printed on them then you can possibly buy it on the net if they don't carry then you need to go to dealer
12-22-2010, 06:42 PM
#7
Audiworld Junior Member
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
the car manage to start after about 15mins of puting the ignition to on.
i doubt its the fuse, since it manage to start.
i wonder where is that relay located...
i doubt its the fuse, since it manage to start.
i wonder where is that relay located...
Trending Topics
12-26-2010, 10:15 PM
#8
Audiworld Junior Member
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
first you need to find out which relay is bad, not all of them are the same, each has different AMP and design and price is different , once you find bad relay, each relay has part# printed on them then you can possibly buy it on the net if they don't carry then you need to go to dealer
3 relays nos. 373 (with 15Amps on top compartment of it), relay 614 (with 40Amps on top compartment of it), and another small relay didn't get its numbers.
I checked the fuses, none of them were blown.
I fiddled around the relays, and now the car is it no state i.e. no activity at instrument panel just "ABS" "SEATBELTS" "AIRBAG" "PARKING BRAKE" "ENGINE CHECK" indicators. Car can't horn, but light able to on, and still no start.
I think i did something worse while fiddling the relays. What's relay 373 and 614?
12-26-2010, 11:15 PM
#9
Audiworld Junior Member
Thread Starter
Join Date: May 2005
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
updates...
found out that the battery somehow drained whilst fiddling with the relay..
normalize all connections, jump start the battery and engine manage to start with error
"P1602".
normalize all connections, jump start the battery and engine manage to start with error
"P1602".
Thread
Thread Starter
Forum
Replies
Last Post
s2kman
A6 / S6 (C6 Platform) Discussion
12
08-22-2023 01:15 PM
euroshowoff
A4 (B6 Platform) Discussion
5
01-09-2021 11:11 AM
twoquattros
A4 (B5 Platform) Discussion
6
04-21-2006 06:58 PM
