Stage 2 complete ;-)
#1
AudiWorld Super User
Thread Starter
Join Date: Jan 2004
Posts: 3,097
Likes: 0
Received 0 Likes
on
0 Posts
Stage 2 complete ;-)
<img src="http://pictureposter.audiworld.com/68533/audi_pics_824.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_828.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_829.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_831.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_828.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_829.jpg">
<img src="http://pictureposter.audiworld.com/68533/audi_pics_831.jpg">
#5
AudiWorld Super User
Thread Starter
Join Date: Jan 2004
Posts: 3,097
Likes: 0
Received 0 Likes
on
0 Posts
Yes coilovers, 2Benn front & rear, 2B revolution camber/caster plates....
....Koni adjustables, every single bushing.....front subframe, rear 95.5 Urs6A RSB'd subframe, rear "A" arm bushings/mounts, wheel bearings, 4.2 28mm front swaybar, controll arms, tierod assebley's (rack to tierod end), rear camber links, rear calipers/pads/rotors, Big Black's, all outer & inner CV boot kit's, ect, ect, ect.
I raised it up a bit in the front & while jacking up the front pass side the rear pass side came off the ground as well 8-0
I didn't get to go out on a shake down run yet cause the exhaust is taken out so I can install the 4 wire 02 sensor. I'm all so waiting to see what I'm going to do with the exhaust. I got one from Paul at COC on the way...but I still want the pipes to exit rite before both rear tires!! But I don't wanna attract too much attantion...BUWAHAHAHAHAHAHA
Stage 3 is next....
I raised it up a bit in the front & while jacking up the front pass side the rear pass side came off the ground as well 8-0
I didn't get to go out on a shake down run yet cause the exhaust is taken out so I can install the 4 wire 02 sensor. I'm all so waiting to see what I'm going to do with the exhaust. I got one from Paul at COC on the way...but I still want the pipes to exit rite before both rear tires!! But I don't wanna attract too much attantion...BUWAHAHAHAHAHAHA
Stage 3 is next....
#6
AudiWorld Super User
Thread Starter
Join Date: Jan 2004
Posts: 3,097
Likes: 0
Received 0 Likes
on
0 Posts
yeah that a quality piece of trim board.....
...but I still have to bleed the brakes & hook up the new e-brake cables..so I had no brakes.
So no I haven't taken it for a spin yet. But I can't wait. I'll prolly finish bleeding the brakes, & hook the exhaust back up so I do just that.
But I'll tell you it's rear stiff! Sicky's ;-)
So no I haven't taken it for a spin yet. But I can't wait. I'll prolly finish bleeding the brakes, & hook the exhaust back up so I do just that.
But I'll tell you it's rear stiff! Sicky's ;-)
Trending Topics
#10
Nice Ron!!
Now get those turbos hooked up so I can drive it in Oct! That thing looks MEAN!
I thought the same thing about the chaulk outline but MrGoodbytes beat me to it. LOL.
I thought the same thing about the chaulk outline but MrGoodbytes beat me to it. LOL.