AudiWorld Forums: TT (Mk1) Discussion

Paris 2008: Full Video and Photo Galleries Online

World Debut: Audi A1 Sportback concept

Now Supercharged: 2010 Audi S4 Sedan & Avant

MKI TT FAQ || Mk2 TT Forum || Audi TT Pricing Info

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] ... [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [>>>]
Total Threads: 179065, Total Pages: 3582

I'm not really sure what to say about this.... - BTTI 2008-09-30 21:13:36 (209 views) That's a really good looking boat....... I mean....... - BlueChip 2008-10-01 07:58:10 (22 views) That would be a lot of fun!!! - Greg225TT 2008-10-01 05:54:06 (13 views) It looks better as a boat IMO! - Black BeauTTy 2008-10-01 05:46:49 (12 views) R8 needs a trailer hitch. - RSpdstr 2008-09-30 23:01:28 (18 views) i'd take either, dang that would be fun. - 1 Mean TT 2008-09-30 22:56:09 (14 views) Holy Flotsam! - Blue TTop 2008-09-30 21:20:09 (137 views)
Oil changes- Self Perform? - bobbyH 2008-09-30 21:08:00 (96 views) Thanks everyone! - bobbyH 2008-10-01 16:40:15 (18 views) Just switched to Amsoil 5-40 euro blend, OEM filters - JohnLZ7W 2008-10-01 16:52:13 (28 views) Thank you John. Nice write-up - bobbyH 2008-10-01 17:49:06 (16 views) Yep, DIY every 5k miles - JohnLZ7W 2008-10-01 07:29:39 (21 views) For the truck, I buy Mobil 1 and then take it to the Firestone shop. - bubba j 2008-10-01 06:35:44 (26 views) DIY here too. Only because I have access to my neighbors car repair shop and lifts. - XCLR8TT 2008-10-01 06:18:23 (20 views) I agree with Hans > - GorTT 2008-10-01 05:05:10 (46 views) hardest part is the disposal of the old oil for me......>>> - TTinCT 2008-10-01 04:49:18 (69 views) Autozone takes old oil....no charge. - BTTI 2008-10-01 21:01:53 (21 views) The guy i spoke to in>>>> - TTinCT 2008-10-02 04:50:41 (20 views) We can put it out on the curb with our recycling here - JohnLZ7W 2008-10-01 08:10:45 (17 views) see....now that is cool>>> - TTinCT 2008-10-01 08:30:48 (28 views) Around here all the quicky lubes will take it. Might be state law. - bubba j 2008-10-01 06:34:15 (13 views) Your local fire department should be able to take it off your hands - roadyTT 2008-10-01 05:42:16 (20 views) actually tried that>>> - TTinCT 2008-10-01 05:44:43 (48 views) How about a quick change place? They sell the used oil last I checked. - roadyTT 2008-10-01 06:18:42 (19 views) we have two in town....have not done that yet......>>> - TTinCT 2008-10-01 06:23:18 (30 views) Worst case scenario.... - roadyTT 2008-10-01 06:26:32 (32 views) hmmmmm...........or a Home Depot 5 gallon paint bucket>>>> - TTinCT 2008-10-01 06:35:59 (31 views) providing you can get a seal on the lid, why not - roadyTT 2008-10-01 06:53:29 (13 views) grab a 6 gallon yellow fuel tank at the auto parts store. - adminisTerTurbo 2008-10-01 05:35:58 (57 views) Been doing that for years - local autoparts stores and recycling center are close by.... - joe@vwvortex 2008-10-01 07:36:39 (15 views) actually, i think i learned that from you! - adminisTerTurbo 2008-10-01 10:36:01 (15 views) Which store? I've got some I need to unload too! - TTinWV 2008-10-01 06:58:33 (18 views) hmmm, you know i don't know around here. i'm usually taking it to advance auto in bridgeport - adminisTerTurbo 2008-10-01 10:38:34 (18 views) note post above^^^^>>> - TTinCT 2008-10-01 05:45:58 (42 views) not cool! - adminisTerTurbo 2008-10-01 10:35:01 (13 views) What about shops/oil change places? >> - Scenic Driver 2008-10-01 06:22:09 (24 views) So far the only time in 6 years my car has been worked on by someone other than me >> - Scenic Driver 2008-10-01 04:31:55 (42 views) Self performer here. - MCPaudiTT - DEFCON 1 2008-10-01 04:30:20 (34 views) Yes, I do oil changes myself. - MarTT 2008-10-01 04:15:10 (24 views) I try to do a lot of work myself... - tteuer 2008-09-30 21:25:44 (40 views)
Anyone interested in an ABT grille? - Kenghh 2008-09-30 19:51:57 (277 views) YGM! - Room4TU 2008-10-01 11:01:32 (15 views) Which silver? Lake Silver?? - ClarkSJ 2008-10-01 09:06:07 (21 views) Lake silver - Kenghh 2008-10-01 11:10:43 (15 views) Price? - TonyStarkz 2008-10-01 05:47:40 (19 views) if it was blue.......... - ITALSKIER 2008-10-01 05:21:17 (26 views) MINE! - ..o_O.. 2008-09-30 21:36:24 (36 views) I would if i didnt promise myself not to spend money until after coils - kTTang 2008-09-30 20:24:44 (48 views) badgeless grille - Kenghh 2008-10-01 11:10:20 (18 views) Should be lots of interest. :-) - Blue TTop 2008-09-30 20:08:57 (32 views)
Anyone know what the drop is on ABT coilovers? and how it compares to my current set up... - DynomiteTT 2008-09-30 19:41:48 (37 views) nevermind, I thought you said springs only...my bad. - ..o_O.. 2008-09-30 21:41:29 (17 views) I guess.... theres a set on vortex i might buy.... - DynomiteTT 2008-09-30 22:00:44 (18 views)
Is there an all-weather car cover you guys could recomend? - SwimFasTT 2008-09-30 19:25:05 (49 views) Regardless of the cover, don't leave the car covered in inclement weather. Water may condense . . . - Chuck 2008-10-01 12:09:15 (22 views) Really? Even if the cover claims to be breathable? - SwimFasTT 2008-10-01 20:22:52 (11 views) a garage works well fro me - carsluTT 2008-10-01 06:51:10 (21 views) Works great for me too! But, when I'm at college in Bethlehem, PA I don't have that luxury :-( - SwimFasTT 2008-10-01 08:34:00 (15 views) I have a Strat cover I don't use. Email me and I'll work a price out for you. - Hal_TT::CBP 2008-09-30 20:18:30 (21 views) Re: I have a Strat cover I don't use. Email me and I'll work a price out for you. - spincityy 2008-10-01 06:13:09 (25 views) Shoot me a note. Happy to help, mine is not being used... - Hal_TT::CBP 2008-10-01 19:06:20 (12 views) Thanks for the offer but I already pulled the trigger on one! Needed it for next week. - SwimFasTT 2008-09-30 20:31:38 (17 views) get the Stratmosphere cover and with "huge20" % off, makes a great gift - Horch it 2008-09-30 19:34:48 (27 views)
X-Post from Norcal Free Track Day at Infineon! - GOFASTT 2008-09-30 18:45:46 (38 views)
OMG! Going from an F150 back to my TT is a MAJOR rush! - revisiTTed 2008-09-30 15:56:47 (88 views) agreed. a break from the TT gives you perspective.... - scoTT la rock 2008-10-01 06:02:00 (22 views) Going from an F150 to any thing else with wheels is a rush ;) - DumpTTruck 2008-09-30 16:57:02 (19 views)
Your last chance to get Bilstein Shocks and Coilovers at the current price - Alex@A.W.E. 2008-09-30 15:31:11 (142 views)
Front anti roll bar. ???? - J. Patterson 2008-09-30 14:24:38 (174 views) I run this stuff> ALSO Question about haldex controllers>>> - VorsprungTT 2008-10-01 08:33:27 (52 views) I don't have a blue or orange Haldex - while it may have an affect on handling... - joe@vwvortex 2008-10-01 08:53:56 (47 views) if you change....i would change to>>> - TTinCT 2008-10-01 04:55:41 (70 views) Thanks-- didn't know about those. - J. Patterson 2008-10-01 11:42:42 (33 views) Those are the bars I was thinking about swapping too!!!! Anyone run em? - VorsprungTT 2008-10-01 08:37:45 (38 views) KodeTT does....loves them......>>> - TTinCT 2008-10-01 08:46:22 (39 views) there's no comparison. i would do it again in a heartbeat... - kodeTT 2008-10-01 14:50:21 (27 views) still a good deal at.. - kodeTT 2008-10-01 14:52:14 (31 views) wow, you want a bigger front bar? i disconnected mine altogether, albeit for autocross - ArTT Vandelay 2008-09-30 15:35:41 (57 views) A bigger bar is the last thing I need on the track - in fact - i need more front camber and - joe@vwvortex 2008-09-30 16:32:31 (77 views) Yes, but with a 21mm in the rear, I can see the rear stepping out a bit more than desired. - AxeYrCat 2008-09-30 18:07:32 (53 views) Both Joe and I run the HR 21 RSB... camber plates are on the short>>> - GOFASTT 2008-09-30 18:27:47 (67 views) I got the Eibach front camber kit. Seems to work well. Has a bit of rubber on it so it doesn't - bubba j 2008-10-01 06:38:18 (44 views) I've seen that kit - allows up to 1 degree of additional negative camber but can - joe@vwvortex 2008-10-01 07:42:10 (40 views) thanks.. I'll check it out :-) - GOFASTT 2008-10-01 06:46:37 (36 views) No question that more rear roll stiffness will help the 3rd gear corner ploughing. - J. Patterson 2008-09-30 18:53:16 (54 views) Common mistake is to early apex and then over compensate... - GOFASTT 2008-09-30 20:20:52 (47 views) Understand completely what you mean. Sometimes-----> - J. Patterson 2008-10-01 11:35:51 (33 views) You made a real good point on how one event>>> - GOFASTT 2008-10-01 15:07:47 (27 views) Couldn't have said it better myself. Also need to consider camber settings in the rear and tire - joe@vwvortex 2008-09-30 20:58:13 (44 views) The Front bar is not always a bad thing either: - M power this! 2008-09-30 22:54:41 (45 views) 22's front and rear would work better than 25 front 21 rear - and again it depends - joe@vwvortex 2008-10-01 07:46:24 (41 views) very true - M power this! 2008-10-01 09:05:27 (33 views) No.....>> - TTschwing/Modshack 2008-09-30 14:31:48 (241 views)
always nice to see another 'cool car' parked on the block... - \|everso!\| 2008-09-30 14:14:06 (466 views) What's with... - msauve 2008-09-30 18:12:49 (64 views) i'm sure there is... - \|everso!\| 2008-09-30 18:32:56 (48 views) It's just a matter of... - msauve 2008-09-30 18:51:17 (37 views) you gotta love the font they used to write "fart" though! ha - \|everso!\| 2008-09-30 19:00:56 (24 views) Hmmmm....Curious resemblance!... - TTschwing/Modshack 2008-09-30 14:22:15 (82 views) you better not have driven here to clean my car... - \|everso!\| 2008-09-30 14:24:56 (47 views) LOL......YOu need a mobile detailing tractor trailer...:-)....>> - TTschwing/Modshack 2008-09-30 14:27:23 (166 views) Looks SO much better with the black grille. - AxeYrCat 2008-09-30 18:08:34 (20 views) oh man...the similarities are amazing...do those wheels come... - \|everso!\| 2008-09-30 14:28:59 (47 views) They are aftermarket...> - TTschwing/Modshack 2008-09-30 14:35:27 (138 views) those wheels....man, they're the epitome of cute! - \|everso!\| 2008-09-30 14:43:20 (27 views) Sorry, but I have to disagree, these are the epitome of cute! - AkRascal 2008-09-30 16:46:53 (101 views) haha - TTwizted13StrtRcr 2008-09-30 19:13:54 (19 views) bless Ronal! those should have been OEMs - \|everso!\| 2008-09-30 17:22:50 (29 views) Winnah! - TTschwing/Modshack 2008-09-30 17:04:09 (22 views) Funny, I bought those about 20 years ago and they are still as new. - AkRascal 2008-09-30 17:29:39 (36 views) Meant to emulate the Minilite look from way back but Porky cute!...They weighed a ton! - TTschwing/Modshack 2008-09-30 14:45:13 (30 views)
Has anyone in the Bay Area had their cluster replaced and NOT been a part of the settlement? - Chuck 2008-09-30 13:56:18 (52 views) Pull and reset gas gauge needle? Yes, you can and I've done it - ClarkSJ 2008-10-01 12:09:00 (28 views) You have a 2000. If you do not have documentation of a failure within the first 6 years you are SOL - bubba j 2008-09-30 14:13:24 (33 views) While at Grad school one of my law Professors always stated..>> - TTBlack 2008-09-30 18:35:46 (32 views) It's definitely documented, and with Sonnen; I complained many years ago . . . - Chuck 2008-09-30 15:02:37 (37 views) In the same boat. Cluster replaced once and nixed out of settlement. - RSpdstr 2008-09-30 15:28:34 (41 views)
question for those who have done light weight battery > - TTwizted13StrtRcr 2008-09-30 13:51:51 (65 views) Put my battery in the rear. But it did work up front for a while first. - furiousgeorge 2008-10-01 18:14:37 (14 views) Here is my setup. Got the generic hold down bracket with 10 inch J hooks at a - sTTevo 2008-09-30 19:27:17 (63 views) look in my pic poster...mine's been mounted like that for over a year - nikhil 2008-09-30 15:18:33 (37 views) im seeing a bunch of steeler pictures (no compliant, love our steelers).... - TTwizted13StrtRcr 2008-09-30 18:53:26 (24 views) huh? - nikhil 2008-09-30 19:03:11 (24 views) lol... - TTwizted13StrtRcr 2008-09-30 19:10:34 (24 views) Not cheap but the nicest mount around. - hahnmgh63 2008-09-30 20:40:45 (24 views)
Wasn't someone looking for an option code "decoder" recently? - MCPaudiTT - DEFCON 1 2008-09-30 13:41:44 (50 views) >> added to the FAQ. - MarTT 2008-09-30 17:35:09 (19 views)
Breeding Experiment - LSZ 2008-09-30 13:28:31 (335 views) i have found>>>> - TTinCT 2008-09-30 18:04:59 (40 views) used to happen, back in the day - adminisTerTurbo 2008-09-30 16:48:24 (145 views) mmm...RS2 - \|everso!\| 2008-09-30 17:31:51 (21 views) oh..and this is coming...A8 + 911 = - \|everso!\| 2008-09-30 18:11:20 (87 views) careful what you wish for... - GorTT 2008-09-30 15:02:19 (150 views) I'd drive that.. - GoKart3 2008-09-30 16:19:57 (35 views) Could happen... - RSpdstr 2008-09-30 14:35:24 (184 views) Re: Could happen... - LSZ 2008-09-30 14:47:36 (60 views) hahahah....wtf - \|everso!\| 2008-09-30 14:42:46 (28 views) Sometimes a little in-breeding works out.....> - TTschwing/Modshack 2008-09-30 13:55:52 (190 views) Big brakes. ;-p - AxeYrCat 2008-09-30 18:09:43 (19 views) Nice shot. - AchTTung--Vollgas 2008-09-30 13:37:16 (30 views) i love that 911. gorgeous. - \|everso!\| 2008-09-30 13:30:47 (33 views)
Does anyone have pictures of a good timing belt vs a worn belt. Also accessories belt good and bad. - unobTTainum 2008-09-30 12:41:24 (51 views) Quick pic of my old one that was replaced, can't see much wrong with it...... - blackfnTTruck 2008-09-30 16:41:15 (87 views) Thank you! - unobTTainum 2008-10-01 14:04:08 (15 views) No cracking of the rubber: OK, if there is cracking, replace.....> - TTschwing/Modshack 2008-09-30 13:07:51 (57 views) I believe the belt usually fails long after the tensioners or H2O pump bearings - alms_TT_ny 2008-09-30 13:05:46 (34 views) Yeah...The belt is usually collateral damage.. - TTschwing/Modshack 2008-09-30 13:13:08 (25 views) which is why inspection of the belt doesn't really do much...right? - \|everso!\| 2008-09-30 13:48:34 (29 views) Correcto! - TTschwing/Modshack 2008-09-30 13:50:14 (21 views)
Question about off brand coolants...>>> - revisiTTed 2008-09-30 12:28:53 (64 views) I have yet to hear of anyone who's had problems with other coolants >> - DumpTTruck 2008-09-30 16:56:01 (32 views) I would flush G05 out, go G12 coolant for piece of mind. - RSpdstr 2008-09-30 13:01:32 (51 views) Well, ok, so Audi says use only G12, but... - revisiTTed 2008-09-30 13:27:09 (56 views) G05 is Zerex... - TTschwing/Modshack 2008-09-30 12:34:09 (73 views) So should I have the shop drain it and replace with G12? - revisiTTed 2008-09-30 12:51:44 (42 views) G12 is not so good. I'd keep the G05 or swap it for the newer purple G12+ Audi/VW stuff - Hal_TT::CBP 2008-09-30 13:03:06 (61 views)
Just had my timing belt "inspected".. - tteuer 2008-09-30 11:59:44 (120 views) They didn't even look at mine, nor did I have it replaced at their dealership (or any dealership)... - tteuer 2008-10-01 16:54:39 (19 views) same here i took my car in to get the cluster replaced, under warranty and they insisted that they.. - MaD MaTTer 2008-10-01 10:34:53 (28 views) They get paid for the time by Audi. - MaxHedrm 2008-10-01 11:56:13 (16 views) I had the same experience. - bubba j 2008-09-30 12:24:12 (25 views) I wonder what his answer would have been if you said no - Scenic Driver 2008-09-30 12:08:40 (31 views)
AWE Tuning DV1 Diverter Valve - ClarkSJ 2008-09-30 11:41:37 (108 views) Installed!! - ClarkSJ 2008-09-30 19:03:41 (87 views) that's good - Horch it 2008-09-30 19:38:06 (36 views) If it works, it works. - AchTTung--Vollgas 2008-09-30 19:30:13 (29 views) Kudos for being the "Guinea Pig" - J. Patterson 2008-09-30 13:07:11 (51 views) Oh, I agree, it is a homely little bugger. . . - ClarkSJ 2008-09-30 13:53:07 (46 views) I on the other hand picked up the Strat hyperboost core - Horch it 2008-09-30 12:33:48 (54 views) I have three Stratmosphere valves, and they have been rock-solid - ClarkSJ 2008-09-30 12:39:33 (51 views) never had any issues with the Strat DVs as well. and i've had at least 3... - kodeTT 2008-10-01 14:54:47 (19 views) good to know...I just hope I don't have to lube it every month - Horch it 2008-09-30 12:47:41 (39 views) Almost 30K on the Passat 1.8T with no maintenance - ClarkSJ 2008-09-30 13:01:04 (42 views) and depending on your upcoming review, I may have made a mistake - Horch it 2008-09-30 13:36:52 (43 views)
H20 TT Photos>>> THAT WORK!!!! - VorsprungTT 2008-09-30 10:21:40 (386 views) I was a little surprised actually, I was down there with one other TT, and didn't see ANY others - furiousgeorge 2008-10-01 18:24:20 (24 views) Same here, I saw 1 or 2 floating around. I thought they were going to stick us with A4's> - VorsprungTT 2008-10-01 23:34:02 (11 views) I like these cars - LonelyTT 2008-10-01 02:58:26 (50 views) That green one was pretty sick indeed! I'm not a fan of bags sorry red :( - VorsprungTT 2008-10-01 08:42:37 (21 views) reminds me of how much i LOVE those old Corrados... - \|everso!\| 2008-09-30 13:49:48 (27 views) Sorry to have missed it.....always a favorite event for me - TTinCT 2008-09-30 11:57:29 (22 views) We will keep that a Seacret...:-) - TTschwing/Modshack 2008-09-30 13:14:21 (23 views) Thanks, no you da MAN. - 01TTR in MD 2008-09-30 11:28:56 (32 views) Doug!!! I figured you were on here but didn't visit much>>> - VorsprungTT 2008-10-01 08:47:24 (24 views) Re: I guess you found me... - 01TTR in MD 2008-10-01 11:49:43 (21 views) maaaach better. i like! - PracTTical [01TT225] 2008-09-30 10:43:45 (20 views)
"Timing Belt Must Be Changed" - Stealership........ $1304 8hrs at 132/hr - unobTTainum 2008-09-30 09:34:55 (139 views) grab your ankles and assume the position. That is crazy. - revisiTTed 2008-09-30 13:29:19 (16 views) UPDATE: I have a reciept from the indi shop that supposidly did the original work... - unobTTainum 2008-09-30 12:23:29 (101 views) I would guess they just reused the accessory belt. Takes about 10-15 minutes to put in a new one. - SparTTan 2008-09-30 13:40:11 (25 views) Hmm.... only $160 in labor?? - ClarkSJ 2008-09-30 13:06:19 (29 views) Quite possible. The accessory belt is supposed to be changed at 80,000 miles. - bubba j 2008-09-30 12:25:50 (34 views) I suppose it makes sense, but that is shady of the dealership to try and charge me for the entire.. - unobTTainum 2008-09-30 12:27:59 (41 views) To be "fair" they had probably never seen someone replace the timing belt without replacing - bubba j 2008-09-30 12:58:50 (33 views) Duh! - TTschwing/Modshack 2008-09-30 12:32:02 (20 views) just take it to an indy quick and bask in that peace of mind. - PracTTical [01TT225] 2008-09-30 09:47:20 (29 views) The ribbed belt is the accessory belt -- maybe this was reused after the new timing belt went in. - SparTTan 2008-09-30 09:41:47 (26 views) bump - bubba j 2008-09-30 11:25:36 (22 views) sticky? - Lefko 2008-09-30 11:31:56 (19 views) what makes you think they did not change it and>>> - TTinCT 2008-09-30 09:37:29 (74 views) The dealer that I bought the car from is providing me with a reciept that shows the belt and pump.. - unobTTainum 2008-09-30 10:08:51 (59 views) The answer is always....> - TTschwing/Modshack 2008-09-30 10:31:02 (69 views) Not always. I had our 2003 A4 (53Kmiles) inspected yesterday they OK'd it to 105K - AudiMick 2008-09-30 11:05:45 (54 views) Correct me if I'm wrong> - Lefko 2008-09-30 11:31:03 (50 views) Ha ha....Good luck!.....> - TTschwing/Modshack 2008-09-30 11:10:44 (55 views)
I've been contenplating doing an interior makeover PT2>>> - VorsprungTT 2008-09-30 09:01:31 (215 views) ALMS cars came with black headliner as did cars with vanilla interior apparently - JohnLZ7W 2008-09-30 09:06:01 (60 views) Thanks, I wonder what it would cost me for OEM black! Anyone with PDF ETKA of interior trim P/Ns? - VorsprungTT 2008-09-30 11:16:32 (24 views) I could start taking the blue car apart to get part #s but would probably get in trouble ;) - JohnLZ7W 2008-09-30 11:23:06 (22 views) Thats funny :) Thanks though. I'm going to look around online and talk to world impex! - VorsprungTT 2008-10-01 08:41:09 (18 views) I think the upper side of the doorcard is check - the bottom is a wide net. Top looks just like the - MCPaudiTT - DEFCON 1 2008-09-30 09:22:29 (101 views) Hmm, yeah I guess that is checkered, never noticed that before - JohnLZ7W 2008-09-30 09:53:14 (23 views)
TT-West pics - suiTTman 2008-09-30 08:13:31 (263 views) Very nice Pics it was great meeting everyone - TTransport 2008-10-03 06:39:37 (9 views) Great Pix Jay!! Good to see you again............ - fredyTT 2008-09-30 13:23:34 (77 views) Thanks Jay! - GOFASTT 2008-09-30 09:25:54 (21 views) Great shots! I love the mountains. They always make for a nice background. - BTTI 2008-09-30 09:25:43 (25 views) Nice pix Jay....looks like everyone had fun....congrats to Gina and Peter for another great event! - TTinCT 2008-09-30 09:21:01 (22 views) Great scenery, thanks - AchTTung--Vollgas 2008-09-30 09:08:44 (18 views) Great pics Jay. Thanks for sharing. - RoberTT 2008-09-30 08:34:23 (18 views) Hey Jay - good to see you again! Nice pics - joe@vwvortex 2008-09-30 08:31:18 (26 views) Hey, can you throw my sig pic into your vanity plate collection? - roadyTT 2008-09-30 08:28:49 (28 views) Re: Hey, can you throw my sig pic into your vanity plate collection? - suiTTman 2008-09-30 10:55:34 (33 views) Great summary of the event Jay, thanks. Sorry we had to bow out. - AkRascal 2008-09-30 08:28:09 (25 views) Great pics! You get around, country-wide! - InTTruder 2008-09-30 08:17:28 (26 views)
Update on my alignment and steering angle sensor issues - SparTTan 2008-09-30 07:43:55 (98 views) i hear you loud and clear..> - PracTTical [01TT225] 2008-09-30 09:46:08 (35 views) Am glad you found a good shop. Happen to have heard of any in Southern California? - Milpower 2008-09-30 18:40:47 (17 views) talk to horch it. i think he's in socal. - PracTTical [01TT225] 2008-10-01 10:29:26 (13 views)
Some fantastic footage from a 10-year TT celebration in Sweden, including one of the '95 originals.. - MCPaudiTT - DEFCON 1 2008-09-30 07:34:28 (175 views) Couple questions on the prototype... - MCPaudiTT - DEFCON 1 2008-09-30 09:20:41 (162 views) Heres the UUC actually on the roach...yeah it was loud - Qu!cksilva 2008-09-30 13:56:34 (76 views) here's the TTS from the Tokyo show, and a sketch for the downturn exhaust... - vicious circles 2008-09-30 11:20:53 (98 views) Bob's right, only the spyder concept had the vents. UUC did make a downturned exhaust tho - JohnLZ7W 2008-09-30 09:52:19 (30 views) marcus had one I believe. Loud as snot. - ZGTT 2008-09-30 10:09:34 (27 views) Not much Mufflin' going on there...:-) - TTschwing/Modshack 2008-09-30 12:38:22 (82 views) nope.. - ZGTT 2008-09-30 14:14:25 (30 views) as I recall only the roadster concept car had the vent, and then on just one side I believe. - ZGTT 2008-09-30 09:49:04 (30 views) Maybe a 225/180 difference? Otherwise the Coupe and Roadster should be the same engine-wise... - MCPaudiTT - DEFCON 1 2008-09-30 09:53:18 (27 views) very cool, thanks for posting - adminisTerTurbo 2008-09-30 08:53:20 (23 views) Love the MkI concept, wish Audi offered that upholstery on the seats - alms_TT_ny 2008-09-30 08:37:17 (40 views) The rear side window delete has been done already and the optional cloth seats are close - JohnLZ7W 2008-09-30 08:49:16 (100 views) have any pics of the rear side window delete? - alms_TT_ny 2008-09-30 11:06:32 (25 views) From the way back department - JohnLZ7W 2008-09-30 11:24:43 (66 views) jaw drops, drools on keyboard, becomes aroused... - alms_TT_ny 2008-09-30 12:19:45 (27 views) Dunno, there was another link to the website where the build was documented - JohnLZ7W 2008-09-30 12:53:23 (31 views) Man, it was very sweet of them to despoil the rear like that. Makes the whole look. - ..o_O.. 2008-09-30 22:00:09 (15 views) A$$ velcro. - GoKart3 2008-09-30 09:00:22 (25 views) Wow! That chassis-on-floor Mk2 looked pretty cool too. - InTTruder 2008-09-30 08:20:25 (24 views)
Time to replace the short shifter: Poll: Forge combo or Dieselgeek? - brillianTTdc 2008-09-30 06:57:41 (82 views) I've got the B&M and Love it. - 02ALMSTT 2008-09-30 16:37:30 (17 views) Not so fast!...Have you tried adjusting it?....>> - TTschwing/Modshack 2008-09-30 07:22:18 (154 views) i think i got an original Dieselgeek sitting in the garage, i got from Jeff Bipes... - DynomiteTT 2008-09-30 11:49:11 (24 views) Really? I'm sure someone here would find value in it if you don't plan to use it. Love mine. - MarTT 2008-09-30 18:26:53 (13 views) That does look just like the original DG... - AchTTung--Vollgas 2008-09-30 09:14:44 (27 views) That's good to know since yours feels great -- also thanks to you for the sig photo! - brillianTTdc 2008-10-07 10:20:34 (6 views) And lube all pivots/cables with teh ultimate lube... - GoKart3 2008-09-30 08:51:37 (58 views) lol, i love tri-flow. been using it since i was a kid - adminisTerTurbo 2008-09-30 09:01:23 (26 views) Works on teh gokart too. On everything that moves. There were even some guys up here - GoKart3 2008-09-30 09:44:29 (29 views) too funny. i use it all the time on the kart! and yes, WD40 is only for the pipe. - adminisTerTurbo 2008-09-30 13:08:56 (21 views) Works good and doesn't sling. BUT, it doesn't really have the viscosity - GoKart3 2008-09-30 16:17:37 (20 views) Neuspeed mimics the original design pretty well, I thought, although it's not adjustable like HPA - oc_tt 2008-09-30 08:21:09 (19 views) hrm, so what you're saying is that I shouldn't ever expect it to feel like a miata? :) - brillianTTdc 2008-09-30 07:56:28 (17 views) Ha ha!.......Whenever you throw cables into the equation...>> - TTschwing/Modshack 2008-09-30 07:59:09 (50 views) yeah, I would do a Raffi, but I would prefer it to not be mostly metal - brillianTTdc 2008-09-30 08:54:36 (13 views) i think he does some derlin knobs iirc - adminisTerTurbo 2008-09-30 09:02:16 (15 views) Yep... - AchTTung--Vollgas 2008-09-30 10:26:22 (26 views) That's what I have. Works great! - RoberTT 2008-09-30 07:53:15 (15 views) Dieselgeek.... - TTinCT 2008-09-30 07:18:04 (29 views) 2nd - difficulTT 2008-09-30 07:30:30 (20 views) 3rd works FANTASTIC!!!!!!!! - ar design 2008-09-30 07:55:30 (18 views) I'm tempted to try the ECS. I used to be very anti-short shifter...but i'm bored lol - TonyStarkz 2008-09-30 07:11:32 (18 views) I've got the ECS and like it at 49% reduced. I bought the Forge side-to-side reduction - MCPaudiTT - DEFCON 1 2008-09-30 07:16:46 (38 views) how much effort is required to get it into the gear? - brillianTTdc 2008-09-30 07:58:21 (25 views) Sounds like you need to adjust the cable/linkage. - MCPaudiTT - DEFCON 1 2008-09-30 08:09:43 (16 views) in what way do you think it is off? - brillianTTdc 2008-09-30 08:54:57 (16 views) In the way an adjustment would help. The cables stretch, it needs adjustment. Common issue. - MCPaudiTT - DEFCON 1 2008-09-30 09:13:42 (16 views)
Need your expert advise, please. There is this used set of bilstein on ebay... - momotoTTe 2008-09-30 05:18:44 (78 views) I bought mine used, but from the most reliable seller on the planet >>> - HalleTT 2008-10-01 18:45:05 (14 views) Go new. - alms_TT_ny 2008-09-30 06:34:43 (15 views) Listen carefully.....GO FOR NEW - roadyTT 2008-09-30 05:53:08 (23 views) personally i like to buy suspension parts new.....>>> - TTinCT 2008-09-30 05:49:08 (54 views) thanks for the link... didn't trust the description... - momotoTTe 2008-09-30 06:10:19 (22 views) seem like sport.....chk shock part no.s - ITALSKIER 2008-09-30 05:43:27 (18 views)
GOOD MORNING ALL !!.... there's a Lambo in every crowd........ - ITALSKIER 2008-09-30 04:47:31 (283 views) I know what you mean! - BlueChip 2008-09-30 11:10:47 (79 views) LOL! Classic! - as350 2008-09-30 14:30:21 (15 views) My wife orthopedic surgeon has one, in white, convertible. Go figure... And he could not - MCPaudiTT - DEFCON 1 2008-09-30 06:38:46 (71 views) Ha! Never trust a surgeon who kills things for sport... - ..o_O.. 2008-09-30 08:09:27 (18 views) Good morning Sal - Scenic Driver 2008-09-30 06:06:31 (25 views) Nice! It amazes me how low those things are compared to other cars. Morning Sal! - BTTI 2008-09-30 06:01:01 (27 views) New never before seen Lambo gets introduced tomorrow I believe. - TT_Nuge 2008-09-30 05:48:35 (25 views) Nah, those are always the people that are OK in these times> - Lefko 2008-09-30 05:35:14 (40 views) Family exodus with the Maybach to the left...LOL - RSpdstr 2008-09-30 05:19:28 (21 views) Out to the NJ piney woods! Morning Sal! - InTTruder 2008-09-30 05:13:57 (27 views)
Disconnected the MAF. And I did NOT get a CEL. Whaaa?? - BTTI 2008-09-29 20:16:31 (77 views) I've seen this on my car >> - Scenic Driver 2008-09-30 06:03:38 (34 views) I guess sometimes it just takes some time... - BTTI 2008-09-30 06:10:35 (22 views) hmmm......weird>>> - TTinCT 2008-09-29 21:48:23 (48 views) What am I doing with it? - BTTI 2008-09-30 05:55:26 (25 views) huh....>>> - TTinCT 2008-09-30 06:01:17 (21 views) lol! - BTTI 2008-09-30 06:09:12 (22 views) Good...that is more like it>>> - TTinCT 2008-09-30 06:17:38 (20 views) I was happy to see that too... - BTTI 2008-09-30 06:39:48 (20 views) ok, cool>>> - TTinCT 2008-09-30 07:09:28 (17 views) Uh oh...you need one? - BTTI 2008-09-30 09:16:51 (16 views) Uh no....>>> - TTinCT 2008-09-30 09:21:42 (19 views) I'm proud of you! Your math skills are improving! - BTTI 2008-09-30 09:24:18 (16 views) i hear ya....>>> - TTinCT 2008-09-30 09:35:57 (18 views) No problem...I'll get one for you... - BTTI 2008-09-30 09:40:13 (17 views) based on what has been repaired so far>>> - TTinCT 2008-09-30 10:02:23 (18 views) Ohhhh...I do remember you saying something about that. At least I thought it was you. - BTTI 2008-09-30 10:13:26 (17 views) It can take several miles for a CEL to come on for a bad MAF or O2 Sensor. - XCLR8TT 2008-09-29 21:09:45 (26 views) Bad sensors I get. But unplugged? Happened instantly last time. - BTTI 2008-09-29 21:13:41 (26 views) yep, it doesn't make sense... but my experience is the same as yours - Russ Scott 2008-09-29 23:18:27 (46 views)
Paging Quicksilva... - iTTaliano 2008-09-29 19:05:45 (78 views) I have only - Qu!cksilva 2008-09-30 03:14:40 (50 views)
cheap & easy LED - tt32dsg 2008-09-29 17:50:29 (416 views) update - tt32dsg 2008-10-01 16:58:56 (30 views) I wonder if they would be bright enough that they could replace the parking/turn signals - MaxHedrm 2008-09-30 08:02:52 (31 views) looks like two would get ya the length around the headlight... - daves85Q 2008-09-30 05:56:37 (44 views) Why? - Regina_RS4 2008-09-29 22:12:08 (39 views) Re: cheap & easy LED - Joe Smith 2008-09-29 20:09:42 (75 views) erm. that looks weird. - \|everso!\| 2008-09-29 20:08:29 (75 views) Looks like you stole a kids light brite and jammed it in between the bumper - alms_TT_ny 2008-09-29 19:31:13 (69 views) x2 - PracTTical [01TT225] 2008-09-29 19:32:32 (37 views) x3 - \|everso!\| 2008-09-29 20:09:35 (34 views) xQuattro - TTinCT 2008-09-30 05:51:05 (23 views) :) - alms_TT_ny 2008-09-29 19:40:55 (122 views) I think it looks good but do they come in longer lengths to span the whole width of the headlight? - Room4TU 2008-09-29 19:01:03 (33 views) daytime photos LEDs - tt32dsg 2008-09-29 18:32:29 (227 views) Sigh. Your car looks so nice... - ..o_O.. 2008-09-29 21:33:10 (65 views) Re: cheap & easy LED - tt32dsg 2008-09-29 18:15:59 (99 views) Personally, I think I'd mount them in the lower grille plastic, but they look better than expected. - AxeYrCat 2008-09-29 18:12:56 (52 views) I've seen that on an A4, it looked just as wierd/meh/out of place - Scenic Driver 2008-09-30 04:24:43 (36 views) its da blinkin lights...........;-) - ITALSKIER 2008-09-30 04:51:21 (29 views) Re: Personally, I think I'd mount them in the lower grille - tt32dsg 2008-09-29 18:17:50 (86 views) A write-up would be nice! - caramelson 2008-09-29 18:09:57 (38 views) And this light bar is on....the outside of the headlight? - roadyTT 2008-09-29 17:55:51 (50 views) I think in the gap between the headlight and the bumper... ? - AxeYrCat 2008-09-29 18:13:24 (54 views)
I recently moved from NJ to NV and I'm boosting higher then ever...>>> - JerseyTT2 2008-09-29 17:48:25 (86 views) You're at about 3000 feet there...> - TTschwing/Modshack 2008-09-29 17:54:08 (80 views) I thank you kindly sir. I guess I'll be ordering a BM soon. As for the misfires>> - JerseyTT2 2008-09-29 18:02:31 (49 views) You should be OK, but..>> - TTschwing/Modshack 2008-09-29 18:15:49 (52 views) Thanks again. - JerseyTT2 2008-09-29 18:29:30 (22 views)
i read a joevortex post on the mk2 forum that @ TT West... - \|everso!\| 2008-09-29 17:16:42 (144 views) it won't be offered in 'Dirt'... ;-) - GorTT 2008-09-29 17:28:45 (34 views) it just needs the right owner! :) - \|everso!\| 2008-09-29 17:32:35 (28 views) lucky you! - GorTT 2008-09-29 17:48:53 (23 views) Most of the TT-West attendees don't frequent this forum........... - joe@vwvortex 2008-09-29 17:20:14 (116 views) I drove it... I just had to take a few days away from the forum due to work - TTransport 2008-10-03 06:48:37 (7 views) guilty as charged........... - artinmoTTion 2008-09-29 22:17:31 (47 views) what forum do these people go to? I didn't really see TT-West mentioned here or Vortex - JohnLZ7W 2008-09-29 17:23:54 (43 views) Most are repeat attendees - while they may lurk here sometimes..... - joe@vwvortex 2008-09-30 06:23:09 (38 views) oh, it's TOF! - \|everso!\| 2008-09-29 17:27:24 (37 views) Don't really see much mention of TT events over there either - JohnLZ7W 2008-09-29 17:42:57 (28 views)
TT West Photos - SXSMITH 2008-09-29 17:09:36 (161 views) Great Shots, thanks for the links - TTransport 2008-10-03 06:57:40 (5 views) Re: TT West Photos - suiTTman 2008-09-30 05:44:47 (38 views) nice pics! i think i know the guy with the rs4! he drives with his wife's pic>> - debashis 2008-09-29 23:06:56 (37 views) Nice! Will have to make the trip on our own sometime, wish we could have been there. - artinmoTTion 2008-09-29 22:30:57 (22 views) Steve - great seeing you again - fredyTT 2008-09-29 20:37:14 (32 views) Great shots. - AchTTung--Vollgas 2008-09-29 18:12:59 (37 views) Nice shots! Awesome Trip! - GOFASTT 2008-09-29 17:53:48 (32 views) I recognize Freddy TT, SuiTTman and don't do this to me Gina - Horch it 2008-09-29 17:39:32 (65 views) Nice pics! Seems like a few duplicates in there tho... - JohnLZ7W 2008-09-29 17:17:40 (35 views)
Fat fives on VW's ??? ...> - TToneSpasm 2008-09-29 16:36:58 (88 views) fat fives on my 02 golf tdi.. A guy in a audi actually flipped me the bird after seeing it. - ssmv650 2008-09-29 17:57:00 (33 views) That wheel was exclusive to the TT.. - TTschwing/Modshack 2008-09-29 16:43:25 (34 views) mk4 vw's are 5x100 .... mk1 tt's are 5x100........ - carsluTT 2008-09-29 16:38:03 (34 views)
Readiness code problems - as350 2008-09-29 16:03:49 (55 views) You can manually run the readiness tests, I had to do that with my car - JohnLZ7W 2008-09-29 16:16:34 (46 views) I already ran the manual readiness test, --->> - as350 2008-09-29 17:40:18 (35 views) Readiness tests...>> - TTschwing/Modshack 2008-09-29 19:10:48 (35 views) Thanks Steve. I'll drive it a bit more before checking codes again. - as350 2008-09-30 03:07:17 (16 views) All readiness codes passed after almost 200 miles and about 12 start cycles. - as350 2008-09-30 14:25:32 (16 views) Excellent! - TTschwing/Modshack 2008-09-30 14:29:56 (12 views)
Secondary water pump dead> - Lefko 2008-09-29 15:48:21 (63 views) i removed my after run pump system, cars never had a issue but i doo pay attenion beofr shut down - carsluTT 2008-09-29 16:39:01 (24 views) it is the after run pump.....>>> - TTinCT 2008-09-29 16:17:59 (46 views) this is on the final CPO list i'm bringing them> - Lefko 2008-09-29 17:20:00 (32 views) Not questioning you, but how do you know it's "dead?" - Milpower 2008-09-29 15:54:57 (28 views) there is ZERO sound when the car is off> - Lefko 2008-09-29 17:18:44 (34 views) Re: there is ZERO sound when the car is off> - tooofast 2008-09-29 21:51:39 (34 views) good point... i will do that. thanks - Lefko 2008-09-30 05:32:27 (12 views)
Have the Stewart Warner 30-25" Boost Gauge in my garage. How do i install it in the vent? - brat2.ua 2008-09-29 15:18:04 (34 views) What size? The Modschack adapter is cheap and works great. - hahnmgh63 2008-09-30 20:54:36 (12 views) You need a STFA adapter,,, right thru this door - JohnLZ7W 2008-09-29 15:22:18 (40 views) You need my adapter...>>> - TTschwing/Modshack 2008-09-29 15:21:50 (80 views) Thanks. - brat2.ua 2008-09-30 23:30:44 (9 views) And some silicone adhesive - roadyTT 2008-09-29 16:40:58 (16 views) And a coupla jewelers screwdrivers.. - TTschwing/Modshack 2008-09-29 16:42:25 (18 views)
ForceFed Engineering: Audi TT + GT30R - TonyStarkz 2008-09-29 15:15:24 (221 views) unforunatly 2wd. - TonyStarkz 2008-09-29 17:17:28 (47 views) For holding power that's about all you need internal wise>> - MoneyShifTT 2008-09-30 00:23:12 (32 views) Nice, Front wheel or AWD?...built motor? - iTTaliano 2008-09-29 16:43:58 (24 views)
Driving a Ford F150 sucks. Major mush! Picking up my TT from repair tomorrow. - revisiTTed 2008-09-29 15:13:22 (29 views)
The car is headed to the stealership tomorrow for a TB inspection and they said it is the last day - unobTTainum 2008-09-29 15:10:21 (59 views)
Any reason I shouldn't get Revo'd tomorrow? How does it affect MPG and - sccaracer 2008-09-29 14:28:52 (90 views) Run 91... you'll feel chipped! then when you want more.. chip it! - Lefko 2008-09-29 15:42:23 (26 views) Why bother chipping the car if you're not using full stock potential right now? - JohnLZ7W 2008-09-29 14:38:34 (26 views) You should be using at least 91 revo'd or not revo'd. It says so on your gas tank door/lid. - momotoTTe 2008-09-29 14:34:40 (32 views) Got any authority to back those statements up besides the tank door? I have - sccaracer 2008-09-30 06:07:31 (25 views) If you're doing SCCA autocross you need to do a lot more than chip. That puts you into a diff cat. - MaxHedrm 2008-09-30 08:11:45 (15 views) Yes, my car sees redline every day, just over 121k miles now - JohnLZ7W 2008-09-30 07:32:27 (18 views) The rated horsepower is on 91 octane. Lower octane will yield lower hp. - bubba j 2008-09-30 07:24:20 (15 views) I understand that but my point is that I don't really care about every last pony driving around - sccaracer 2008-09-30 09:19:20 (18 views) In that case you should be able to run 87 - JohnLZ7W 2008-09-30 16:46:08 (12 views) or even 77....wipe that engine down to 105hp! :) - \|everso!\| 2008-09-30 17:25:21 (9 views) so WHY would you get chipped? - \|everso!\| 2008-09-30 12:17:53 (20 views) Geez, I thought I explained this already. Like most adults I don't go around town - sccaracer 2008-09-30 16:05:29 (17 views) still doesn't make any sense....but as long as you're happy! - \|everso!\| 2008-09-30 17:24:14 (10 views) It makes perfect sense. Indeed, sensible is what it is. - sccaracer 2008-10-01 06:16:05 (9 views) yep. no TT should be running on 89. - \|everso!\| 2008-09-29 14:41:37 (57 views) 2nd - TToneSpasm 2008-09-29 16:38:53 (16 views)
The steering feels so mushy and not crisp. It dosen't drive like it used to... - momotoTTe 2008-09-29 14:28:30 (71 views) When I replaced my rotors noticed rear lower control arm bushings.... - TTGram 2008-09-29 16:37:25 (36 views) How long did your bushings last after installing the DEFCONs? - Milpower 2008-09-29 17:01:23 (16 views) Would you like me to re-post my list of things ALREADY done to the car? Has all of John's - the - Milpower 2008-09-29 15:12:17 (35 views) List of things done since purchasing the car. Ride, and peace of mind, is much improved - Milpower 2008-09-29 15:30:53 (60 views) Thank you for your time to write all that! Most of all, I was happy to see that you have... - momotoTTe 2008-09-29 15:45:33 (30 views) YW. Just a record kept in order to make any similar/same future jobs easier, plus keep track of what - Milpower 2008-09-29 15:53:05 (28 views) Or just send them to me and I will put the DEFCONs in - MUCH easier! - MCPaudiTT - DEFCON 1 2008-09-29 19:36:00 (16 views) I might use the service when I get thru with all other things that needs to be taken care of.... - momotoTTe 2008-09-30 05:12:25 (11 views) Old link... - MCPaudiTT - DEFCON 1 2008-09-30 05:21:13 (16 views) THAT, Sir, is ABSOLUTELY true. - Milpower 2008-09-30 00:22:47 (12 views) sure, or just post a link? which ever the easiest.. - momotoTTe 2008-09-29 15:15:24 (19 views) shocks, strut mounts, control arm bushings, sway bar bushings, sway bar links, ball joints, tie rods - JohnLZ7W 2008-09-29 14:58:08 (28 views) Just add DEFCONs to that, and [edit] the OP [/edit] should be a HAPPY camper! - MCPaudiTT - DEFCON 1 2008-09-29 14:59:34 (24 views) umm... she... - momotoTTe 2008-09-29 15:00:33 (21 views) d'OH! My apologies! - MCPaudiTT - DEFCON 1 2008-09-29 15:02:33 (22 views) Thanks for the laundry list of things! It helps me narrow down to a few things to be looked at since - momotoTTe 2008-09-29 14:59:33 (33 views)
it's not dirty....it's vintage, man. - \|everso!\| 2008-09-29 11:51:26 (371 views) looks like you are trying to make it a silver car there>>>> - TTinCT 2008-09-29 13:55:03 (51 views) i'm hoping the dust crystallizes... - \|everso!\| 2008-09-29 14:11:29 (46 views) industrial polutants in the dirt probably aren't doing your paint finish any good. - Milpower 2008-09-29 15:56:12 (33 views) eh...it's alright, man... - \|everso!\| 2008-09-29 16:36:36 (48 views) If you ever do, pls let me know the estimate to do so. :) - Milpower 2008-09-29 17:04:27 (27 views) 3,500 for cheap good, 6k for good > - GorTT 2008-09-29 17:27:21 (39 views) Thanks...figured it was up there. - Milpower 2008-09-30 00:23:36 (16 views) if a blk car turns to silver car when it is dirty. I wonder what color does silver car turn into? - momotoTTe 2008-09-29 15:19:32 (40 views) aviator! - \|everso!\| 2008-09-29 16:37:15 (26 views) or>>> - TTinCT 2008-09-29 16:13:04 (36 views) Here > - GorTT 2008-09-29 13:40:19 (162 views) Sell it - Scenic Driver 2008-09-29 13:29:55 (48 views) no way! - \|everso!\| 2008-09-29 13:32:56 (54 views) If you change your mind... - Scenic Driver 2008-09-29 13:42:31 (59 views) right on - \|everso!\| 2008-09-29 13:48:14 (49 views) I don't know, i've never dealt with them - Scenic Driver 2008-09-29 13:54:18 (42 views) it is to both. - DynomiteTT 2008-09-29 14:30:55 (35 views) haha, could be worse! On a positive note, the dust hides the scratches & dents you mentioned b4 - sonus 2008-09-29 13:10:43 (39 views) too right! - \|everso!\| 2008-09-29 13:14:29 (38 views) Spacers! :) - VorsprungTT 2008-09-29 13:08:15 (51 views) already got 20s in the rear....0 in the front. - \|everso!\| 2008-09-29 13:13:09 (55 views) from cleaner days... - \|everso!\| 2008-09-29 13:40:40 (105 views) poor TT : - ( - quaTTro411 2008-09-29 12:54:36 (44 views) not at all...it whispered in my ear earlier and told me.. - \|everso!\| 2008-09-29 13:02:52 (62 views) is the interior "vintage" too? - alms_TT_ny 2008-09-29 12:17:52 (44 views) vintage, man. vintage. - \|everso!\| 2008-09-29 12:18:37 (47 views) soon, it'll be an anttique - alms_TT_ny 2008-09-29 12:19:51 (45 views) or it will at least look like it's been antiqued! - TTempted 2008-09-29 12:27:00 (54 views) barreTT jackson style. - \|everso!\| 2008-09-29 12:21:39 (40 views)
Has anyone tried this kit? - mosmoe 2008-09-29 11:38:09 (154 views) i don't think i would try that. - \|everso!\| 2008-09-29 12:22:58 (38 views) 2nd... regardless of price, I wouldn't... - kTTang 2008-09-29 13:02:52 (40 views) yeah - mosmoe 2008-09-29 12:57:50 (39 views)
Haven't seen anyone post about the strat 20% off sale - TTempted 2008-09-29 11:21:16 (94 views) HyperBoost CORE Diverter Valve------->ordered - Horch it 2008-09-29 22:42:12 (15 views) They must have discontinued the armrests - HACK THS 2008-09-29 12:40:34 (17 views) they have.. - PracTTical [01TT225] 2008-09-29 12:44:24 (39 views) I still have to wonder how many FMICs they've sold at $2049 each - roadyTT 2008-09-29 11:35:32 (17 views) Im with you roadyTT - robertTT225 2008-09-29 12:00:35 (12 views) well, very true, but I'm thinking that a milltek exhaust is pretty good - TTempted 2008-09-29 11:44:38 (29 views) good price...unfortunately the TT exhaust is $1k... - \|everso!\| 2008-09-29 12:12:31 (19 views) So is APR... - TTempted 2008-09-29 12:21:39 (35 views)
In Denver looking for a shop that stocks external fuel pumps? - TTransport 2008-09-29 11:20:05 (53 views) 034Motorsports hooked me up with a local source in Boulder :) !!! - TTransport 2008-09-29 12:42:36 (26 views) Good to hear! - joe@vwvortex 2008-09-29 13:01:41 (19 views) Second that! - GOFASTT 2008-09-29 13:38:14 (19 views) Isn't CarsluTT in Denver? - MCPaudiTT - DEFCON 1 2008-09-29 12:13:52 (28 views) Yep, already reached out waiting on a response from him. He's in the middle of something - TTransport 2008-09-29 12:21:33 (35 views) Yikes - something happen on the way home? Oh - and....... - joe@vwvortex 2008-09-29 11:31:37 (51 views) Something happen on the way home? Yep... - TTransport 2008-09-29 11:51:38 (59 views) Well - i'm sure you saw my post above - then in Elko NV - Bruce picked up screw in his front tire... - joe@vwvortex 2008-09-29 12:00:38 (41 views) no kidding.... cheers to WalMart for a Sunday morning tire fix! - GOFASTT 2008-09-29 12:50:37 (18 views)
intentional typo! :) - ..o_O.. 2008-09-29 10:04:43 (56 views) Just pulled the trigger on these: - ..o_O.. 2008-09-29 10:09:19 (191 views) You should do a full flush every 2 years, regardless of miles. Brake fluid absorbs moisture over - MCPaudiTT - DEFCON 1 2008-09-29 10:15:21 (49 views) Hmmm. Interesting. I just checked my maintenance schedule - ..o_O.. 2008-09-29 10:31:56 (38 views) You wouldn't HAVE to flush, but it was probably part of the job. -