AudiWorld Forums: TT (Mk1) Discussion

AudiWorld Exclusive: Truth in 24 Documentary at AFI Fest

Exclusive Interview: Peter Schwarzenbauer, Member of the Board of Management of AUDI AG Marketing and Sales

MKI TT FAQ || Mk2 TT Forum || Audi TT Pricing Info

[Reader Tips] [Search Forums] [Post Picture] [Post New Thread]

Page: [<<<] [1] ... [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [>>>]
Total Threads: 179931, Total Pages: 3599

wtf ... - BulleTT 2008-10-23 09:58:32 (157 views) Re: wtf ... - BulleTT 2008-10-23 10:43:52 (82 views) There is a haldex check procedure in the FAQ (see top of page for link) - DumpTTruck 2008-10-23 14:04:20 (25 views) you run over a buck? - Lefko 2008-10-23 10:36:59 (32 views) your dealer is on crack. - bobkay 2008-10-23 10:26:37 (31 views)
Went to check my oil level this morning... - idol 2008-10-23 09:11:32 (136 views) happened to me> - Lefko 2008-10-23 10:36:08 (56 views) be safe and change oul but there should be a screen on the pickup...holes smaller than chucks? - Horch it 2008-10-23 09:13:22 (36 views) LOL Horch it you caught the "oul" part too :) - idol 2008-10-23 09:20:14 (23 views) Thats what I thought. Holes should be smaller than the chunks - idol 2008-10-23 09:15:39 (24 views)
Anyone know what the best price is on a MAF right now? - AxeYrCat 2008-10-23 07:55:18 (61 views) I've got a brand new sensor for a 225 - shoot me an email - stilljester 2008-10-23 17:25:53 (13 views) I can't! It's not listed! I'd love to, though... Hit me with an e-mail? - AxeYrCat 2008-10-23 18:09:17 (13 views) YGM - stilljester 2008-10-23 18:21:11 (14 views) And YGM. And by M I mean 'money'. And by money I mean 'PayPal funds'. Thank you! - AxeYrCat 2008-10-24 04:45:38 (13 views) Re: Anyone know what the best price is on a MAF right now? - Joe Smith 2008-10-23 15:39:02 (21 views) Guy on Vortex has a bunch of EX's he was selling for $70 each - joe@vwvortex 2008-10-23 09:32:18 (36 views) Sent him a PM. Thanks! - AxeYrCat 2008-10-23 10:55:22 (17 views) They're probably all gone now! Too bad I take a different Maf - BEA takes an M or MX - joe@vwvortex 2008-10-23 11:44:45 (22 views) unlpug it for the short term....car will run amazingly well...;-) - TTinCT 2008-10-23 12:07:44 (19 views) It runs fine on the street - but underload on the track it goes into limp mode - joe@vwvortex 2008-10-23 13:10:10 (28 views) i have one that may or may not work you can have for shipping - PracTTical [01TT225] 2008-10-23 08:36:48 (43 views) Re: i have one that may or may not work you can have for shipping - Atomic Ed 2008-10-24 08:12:22 (20 views) Reasonable, but I don't know a bout a MAF with that many miles on it. =/ - AxeYrCat 2008-10-23 08:42:42 (32 views) 80K on original MAF here! - ..o_O.. 2008-10-23 08:45:18 (23 views) KNOCK ON WOOD! - AxeYrCat 2008-10-23 08:46:11 (23 views) replaced mine at 105k because of you guys, was still working, now wondering if new one's bad! - artinmoTTion 2008-10-23 09:38:23 (29 views) Ha!! - AxeYrCat 2008-10-23 10:53:52 (13 views) Orignial Cluster, Original DV, too. All work flawlessly! :) - ..o_O.. 2008-10-23 08:52:12 (29 views) Yeah, I'm pretty sure you just jinxed yourself there... ;-) - Lowcountry 2008-10-23 11:07:37 (23 views) Hey, that's not fair!!! =p - AxeYrCat 2008-10-23 09:05:25 (22 views) This is lower.... - BTTI 2008-10-23 08:22:46 (78 views) I've used them and have been satisfied with their products/service. - fredfromny 2008-10-23 08:37:22 (21 views) Not trying to argue, but how's that lower? It's $15 more AND you have to return the core. - Milpower 2008-10-23 08:24:36 (26 views) It's saying that it's $79. - BTTI 2008-10-23 08:58:16 (28 views) Says that for me too... shrug - AxeYrCat 2008-10-24 06:29:38 (17 views) I have never seen a core charge on a MAF before...WEAK! - wheelman21 2008-10-23 08:26:12 (23 views) Pure MS offers the same thing. It's "cheaper" but not the cheapest. I don't care what others think, - Milpower 2008-10-23 08:31:36 (44 views) so do you subscribe to the theory that>>> - TTinCT 2008-10-23 10:20:06 (34 views) TT, nah, no knock. :) Understand what you say about quality/price. For me, it's situational. - Milpower 2008-10-23 11:33:51 (22 views) Have seen one for $60...you want the link? Update (sorry, pasted the wrong thing in there!) GTG - Milpower 2008-10-23 07:58:02 (58 views) I always wonder about the 180 units... I've used those and 2.0L MAFs in the past... - AxeYrCat 2008-10-23 08:45:50 (37 views) They claim they are aftermarket units - wheelman21 2008-10-23 08:33:20 (24 views) True, but guarantee is good enough for me. It it doesn't work properly, just send it back. - Milpower 2008-10-23 08:36:51 (27 views) Good price...my boxster MAF costs over $200 - wheelman21 2008-10-23 08:17:34 (28 views) Check their online store...perhaps they carry yours. If not, e-mail them to see if they can get. - Milpower 2008-10-23 08:23:13 (24 views)
Coolant-to-water ratio can be 50:50 or 40:60 (protection to -25)...right? Also, best way to flush - Milpower 2008-10-23 07:08:11 (81 views) you COULD> - Lefko 2008-10-23 08:48:39 (62 views) Hey Ray, sorry I didn't get back to you> - VorsprungTT 2008-10-23 07:47:42 (60 views) BTW, speaking of school. My last year of college was brutal, so I understand what you are going - Milpower 2008-10-23 07:57:34 (30 views) Hey, buddy, it's fine. Sounds like you've got some fun times ahead. - Milpower 2008-10-23 07:50:44 (35 views) nope > - GorTT 2008-10-23 07:43:33 (60 views) ur joking right?......... - carsluTT 2008-10-23 07:51:03 (32 views) Seriously? Why do you think that? I've been told by mechanics, as well as read in publications, - Milpower 2008-10-23 07:48:08 (62 views) Thats correct, coolant is just for anti-corrosion and anti-freeze proprerties> - VorsprungTT 2008-10-23 07:50:43 (62 views) sorry guys - considering it's written out on the back of the bottle at 50/50 or 60/40 I don't > - GorTT 2008-10-23 09:06:18 (48 views) GorTT, was just making sure I understood the bottle (no English directions). Wanted to ensure the - Milpower 2008-10-23 11:44:13 (31 views) I hate > - GorTT 2008-10-23 12:09:46 (28 views) Audi isn't exactly known for their accurate maintenance instructions ;) - DumpTTruck 2008-10-23 09:55:41 (25 views) actually, i would disagree for the most part>>> - TTinCT 2008-10-23 10:09:10 (35 views)
Smoked lenses thoughts... let me know if you agree? - Lefko 2008-10-23 06:08:13 (89 views) Crystal. I wouldn't block the lower grilles. Mixed opinions on painting headlight housings. - InTTruder 2008-10-23 07:58:03 (26 views) correct me if im wrong but you still have to paint them after you remove side lens correct? - Lefko 2008-10-23 08:05:50 (29 views) If you leave them black, all you technically, have to do is plug up the tiny holes w something - ..o_O.. 2008-10-23 08:48:14 (17 views) oh really? i dont need to use bondo putty like in the writeup and sand em/prim/paint? - Lefko 2008-10-23 08:50:06 (20 views) I used some of the black lens goop to plug the holes... no painting - BluHeaven 2008-10-23 14:21:38 (40 views) skip, paint, skip - alms_TT_ny 2008-10-23 06:13:59 (61 views) Agreed, Remove the reflectors and paint the housing body color, leave everything else alone. - Mbaron 2008-10-23 10:15:24 (16 views) Second. - PracTTical [01TT225] 2008-10-23 06:42:23 (22 views) sorry- didn't mean smoked tails, meant smoked side markers/corners> - Lefko 2008-10-23 06:35:50 (38 views) ok, i think its almost a requirement to do the clear/smoked turn signal strip if...> - alms_TT_ny 2008-10-23 06:57:48 (47 views) you dont think it would look too much like i 'tried to match paint but failed'?? - Lefko 2008-10-23 08:04:46 (18 views)
GOOD MORNING ALL !!!and a happy THURSDAY..........some K9 for ya... - ITALSKIER 2008-10-23 05:12:51 (142 views)
Repost: Update on my ESP light for those that remember... - tteuer 2008-10-22 23:02:49 (63 views)
Issue with car. Running VERY, VERY rough after phenolic spacer install. Flashing CEL and pops from - Milpower 2008-10-22 22:10:28 (116 views) Same thing happened to me a few weeks back... - CubFan63 2008-10-23 05:47:33 (72 views) LOL, I hear ya. Those two nipple lines both have TWO tie-ties on 'em. Replaced those w/ - Milpower 2008-10-23 07:32:35 (35 views) You are a one man soap opera aren't you?! - BlewChip 2008-10-23 04:59:37 (83 views) Interesting thing about popcorn is every yr ppl in the U.S. choke (and die) while eating it. If - Milpower 2008-10-23 08:28:24 (52 views) Funny, I was going to wish you the best with your car too. - BlewChip 2008-10-23 10:48:24 (20 views) This is true My best friend's F-I-L died on Superbowl Sunday right in his recliner just like this.. - ..o_O.. 2008-10-23 08:50:18 (23 views) Some obviously do not deserve to go out that way...some. Sorry for your friend's loss. - Milpower 2008-10-23 08:55:36 (19 views) At least he's trying and learning. Unlike you. All you do is criticize and pontificate... - ..o_O.. 2008-10-23 07:10:21 (22 views) That is because I have taken more TT's apart and repaired them then I care to remember - BlewChip 2008-10-23 11:39:41 (32 views) You're giving him too much credit. tsk as if he knows what "pontificate" means. ;) - Milpower 2008-10-23 08:03:44 (16 views) Your commentary is worthless as usual - roadyTT 2008-10-23 05:11:49 (31 views) Yep... - CubFan63 2008-10-23 05:48:37 (30 views) Not in this particular charity case. - BlewChip 2008-10-23 10:25:45 (20 views) Speaking of charity, who's Chip and why did you... - CubFan63 2008-10-23 18:39:39 (22 views) Did you reuse the metal bracket on the right side of the engine? Don't do that - JohnLZ7W 2008-10-22 22:20:00 (70 views) John- No bracket was included, just the spacer and 2 gaskets. Noticed LOTS of carbon - Milpower 2008-10-22 22:24:01 (73 views) More specifically, don't re-use the stock bolt on the stock bracket. - MarTT 2008-10-23 03:11:51 (63 views) DING DING DING DING DING!!! Duh! THANKS so much. Will take out today! - Milpower 2008-10-23 04:18:33 (31 views) and buy or make a pressure tester - adminisTerTurbo 2008-10-23 05:16:04 (39 views) Right... This bolt must NOT be reinstalled... - MCPaudiTT - DEFCON 1 2008-10-23 03:57:42 (77 views) Mike, you were right. Took off the manifold and both gaskets were had carbon and some whitish - Milpower 2008-10-23 11:41:27 (28 views) TY. Misread your fotki to mean "don't install the new brace." Duh on my part. Thanks again. - Milpower 2008-10-23 06:40:12 (24 views)
Anyone need a New 1/2 KMAC kit? - ClarkSJ 2008-10-22 20:53:59 (70 views) How do you adjust them? From the pics looks like you have to remove it in order to adjust camber. - maaliish 2008-10-24 12:49:21 (12 views) Why not install them in your upper control arms for toe adjustment? - roadyTT 2008-10-23 04:36:24 (22 views) Possibilty. Getting alignment next week. - ClarkSJ 2008-10-23 05:10:47 (13 views) aaahhhhh, I would hold them until after you get an alignment done. - snowpunk_AGTT 2008-10-22 21:03:14 (29 views) Eibach springs, less than 1" drop, should be OK with just arms - ClarkSJ 2008-10-22 21:55:59 (24 views) yeah with those you should... I have H&R's so I'm not taking my chances - snowpunk_AGTT 2008-10-22 22:05:43 (21 views)
Is it difficult to replace the LF ABS wire harness? TIA! - [KRAFTIG] 2008-10-22 17:37:22 (19 views) have been told it's pretty much plug and play, have the same issue here, so will let you know. - artinmoTTion 2008-10-22 23:53:44 (14 views) Thanks. That's what I was told too. - [KRAFTIG] 2008-10-23 05:50:11 (14 views)
Does anyone know what the codes mean from the Autozone diagnostics? - 300ShooTTer 2008-10-22 16:24:53 (63 views) Bentley has online code DTC lists - InTTruder 2008-10-23 03:37:21 (31 views) get a bentley.... manual - Joe Smith 2008-10-22 17:51:00 (28 views) Or use this handy chart on the Bentley website: - MarTT 2008-10-22 18:28:43 (40 views) Googletard. - msauve 2008-10-22 16:32:52 (59 views) Re: Googletard.>>>> - XCLR8TT 2008-10-22 17:17:13 (114 views)
just a heads up, that mk1 arm i'm selling on ebay isat .99c and ending in 4h - snowpunk_AGTT 2008-10-22 15:50:01 (74 views) A link might help your auction! - sonus 2008-10-22 17:15:04 (17 views) posted one once, felt bad enough doing that. Wasn't gonna do it again. - snowpunk_AGTT 2008-10-22 20:52:39 (25 views)
my dad used to drive us to school in an 82 Seville....luckily not this one! - \|everso!\| 2008-10-22 15:11:06 (257 views) Fo Shiz!!! - GoKart3 2008-10-23 08:57:02 (12 views) Nothing's wrong with that. - Levent 2008-10-23 04:58:19 (16 views) That ride looks more practical for NYC driving than a TT. Maybe you should trade him. - sTTevo 2008-10-22 19:00:28 (17 views) That's Pimp Homey! - TTBella 2008-10-22 17:41:25 (20 views) Covered in dog crap that car would look better. Looks like sh$t either way. - revisiTTed 2008-10-22 16:12:40 (23 views) BHO motorcade - RSpdstr 2008-10-22 15:55:02 (27 views) hahahahahahahaha...lmao - wheelman21 2008-10-23 08:24:25 (14 views) lol - Lowcountry 2008-10-22 16:20:37 (19 views) That's your dad? - msauve 2008-10-22 15:27:11 (19 views) LOL. no! but it looks like Flavor Flav's dad. - \|everso!\| 2008-10-22 15:29:43 (22 views)
CHROME, baby....chrome! - \|everso!\| 2008-10-22 13:46:12 (350 views) I see you found the ride of up and coming arabic hip hop artist Lil' Wahid - MoneyShifTT 2008-10-23 12:17:35 (18 views) ladies and gentlemen, your gas prices at work.... - wheelman21 2008-10-23 08:23:13 (25 views) WiNNar!!!!! - GoKart3 2008-10-23 08:39:27 (24 views) heh! my thoughts always go to these examples of wretched excess -> - Russ Scott 2008-10-23 11:49:09 (31 views) Yup.... indeed. Warm up the Enola Gay, I've got a present for you b!tches. - GoKart3 2008-10-23 15:45:40 (19 views) Damn... look at those cars in the background.. porche, ferrari, benz.... - LonelyTT 2008-10-23 02:33:44 (41 views) at least for a few more weeks. seems dubai's in a bit of trouble. - meem 2008-10-23 17:15:36 (15 views) OEM of that car - LonelyTT 2008-10-23 02:29:25 (103 views) compaired to the one coverd in fake dimonds at sema last year thats classy.......... - carsluTT 2008-10-22 21:14:22 (38 views) yuck - TToneSpasm 2008-10-22 16:18:40 (36 views) Ahhh - my eyes, my eyes, I'm blind!!! - SGP 2008-10-22 14:45:30 (42 views) Money obviously can't buy taste... - Lowcountry 2008-10-22 14:02:14 (42 views) but clearly, it can buy plenty of attention. - GorTT 2008-10-22 18:14:28 (29 views) I know. - AchTTung--Vollgas 2008-10-22 14:13:08 (64 views)
:: ECS Tuning :: OEM Heated Blind Spot Mirrors - Back In Stock !!! - ECS Tuning - Sales 2008-10-22 13:38:20 (144 views) This was my first mod. Highly recommended - for safety purposes of course. - MarTT 2008-10-22 14:16:54 (27 views)
Europrice - Currency Exchange Rate Sale! - Alex@Europrice 2008-10-22 12:18:19 (184 views)
Has anyone installed this before? PowerFlex Audi TT Steering Rack Mount Bushing - TTransport 2008-10-22 11:35:32 (186 views) Yes I put one of those in. - SparTTan 2008-10-22 14:00:53 (75 views) Rich (SparTTan) is the only one I know of. I think you need to remove the rack to do it - JohnLZ7W 2008-10-22 11:39:23 (59 views) I believe I will pass for now then, thanks - TTransport 2008-10-22 11:45:26 (24 views) NVH would also go up too IMO - TTinCT 2008-10-22 11:47:38 (33 views) lol i own NVH, point taken, thanks - TTransport 2008-10-22 15:22:09 (23 views) LOL - with your car NVH doesn't matter :-) - joe@vwvortex 2008-10-22 17:33:16 (20 views) Well, since you are one of only two others who drove it, I feel your qualified to rate it's NVH! - TTransport 2008-10-22 19:42:02 (16 views) I sure wish I had more time behind the wheel - that thing is a beast.... - joe@vwvortex 2008-10-23 09:36:46 (19 views) I have one sitting in a box next to me on the end table, next to my beer> - VorsprungTT 2008-10-22 20:57:08 (22 views)
CEL 17544 Solved! - CartoonDog 2008-10-22 11:22:27 (238 views) how did you end up taking that clamp off under the intake manifold? - heinzboy57 2008-10-22 14:15:08 (30 views) I used... - CartoonDog 2008-10-23 09:36:12 (26 views) Dremel or some snips, it's hard to get to but the clamp should give before the nipple - JohnLZ7W 2008-10-22 14:36:56 (18 views) thanks..i'll try the snips again. - heinzboy57 2008-10-22 17:31:03 (17 views) You may want to check PCV system for leaks/torn hoses while you're in there - ClarkSJ 2008-10-22 13:00:35 (38 views) The fabric-covered OEM hoses last, at most, 5 years in any VAG product - ClarkSJ 2008-10-22 12:58:18 (38 views) those hide the drying rubber...and typically, they are not good under or near the heat - kodeTT 2008-10-22 12:10:50 (43 views) call me old school, but I like the cloth covered hoses, and keep rolls of the 2 common sizes - OldSchool AG 2008-10-22 12:14:35 (46 views) That's the hose I replaced a couple years ago...>> - RoberTT 2008-10-22 12:03:42 (113 views) Glad you found it, FPR line is a common one to fail early - JohnLZ7W 2008-10-22 11:38:36 (20 views)
Does anyone know the model of these Enkei wheels? - NOLA TT 2008-10-22 09:19:11 (236 views) Really not sure if they're Enkeis... - NOLA TT 2008-10-22 09:47:53 (42 views) Ok... they're Dezent wheels - NOLA TT 2008-10-22 09:58:48 (152 views) A Google of "dezent wheels" brings back this - ClarkSJ 2008-10-22 10:45:14 (51 views) Get yourself some Brock B2s instead. - AxeYrCat 2008-10-22 10:38:24 (131 views)
Backfire and cold start issues... - iTTaliano 2008-10-22 08:24:11 (63 views) Just switched my coolant temp sensor and it fixed it. I had a greentop with 20K on it I think - snowpunk_AGTT 2008-10-22 10:48:32 (33 views) if its not the CTS check ur plugs....... my apr 3+ is uber unhappy in the cold - carsluTT 2008-10-22 09:40:35 (37 views) coolant temp sensor has been the cause of cold start issues for some people - JohnLZ7W 2008-10-22 08:30:55 (29 views) I do have approx 30k miles on my green top temp sensor.... - iTTaliano 2008-10-22 08:46:38 (35 views) Keep us informed! I'm having similar issues... - CincySpeed 2008-10-22 09:00:18 (33 views) How healthy is your battery? - DumpTTruck 2008-10-22 11:18:50 (25 views) 13.7 for me - CincySpeed 2008-10-23 12:42:22 (14 views) Thx for the feedback guys. Battery is reading 15.2v, is that high?.... - iTTaliano 2008-10-22 11:52:58 (33 views) 15.2v, is good. Try and test it while someone starts the car - DumpTTruck 2008-10-22 16:40:22 (22 views) I'll check it under load today. - iTTaliano 2008-10-23 07:54:25 (11 views)
What are the advantages of coil overs aside from adjusting ride height? - esanmiguel 2008-10-22 06:56:22 (90 views) entry level stuff is really ride height.Corner balancing with soft springs on a heavy car is useless - Audiboy 2008-10-22 15:41:13 (22 views) Perfectly matched spring and damper rates - JohnLZ7W 2008-10-22 07:02:29 (74 views) that's nice on a sales flyer, but what exactly is "perfectly matched?" matched for what purpose? - OldSchool AG 2008-10-22 07:06:42 (92 views) True, but compared to what alot of people run here it is a better match - JohnLZ7W 2008-10-22 07:32:22 (92 views) ahh yes, getting older, settling down.... - artinmoTTion 2008-10-22 08:19:51 (63 views) Yeah, sometime around 80k miles I started settling down ;) - JohnLZ7W 2008-10-22 08:55:38 (50 views) "more ways to adjust them incorrectly than correctly" so very, very true. - bubba j 2008-10-22 08:17:52 (60 views) the ability to corner balance, and on some, the ability to customize spring rates - OldSchool AG 2008-10-22 07:00:33 (70 views) Both of you make good points. Agree with all. ----> - J. Patterson 2008-10-22 08:27:04 (56 views)
Buzzing dash/No Turn signals - maverick225 2008-10-22 05:30:58 (73 views) Re: Buzzing dash/No Turn signals - maverick225 2008-10-29 14:34:58 (17 views) Anybody.....Help - maverick225 2008-10-23 04:56:56 (25 views) Did this happen before you put in the new relay? - fredfromny 2008-10-23 07:11:45 (25 views) Re: Did this happen before you put in the new relay? - maverick225 2008-10-23 13:39:50 (20 views) Re: Buzzing dash/No Turn signals - maverick225 2008-10-22 13:36:11 (37 views) Hornet infestation? - AxeYrCat 2008-10-22 10:42:09 (21 views) You may have gotten a faulty switch. - fredfromny 2008-10-22 05:59:00 (55 views) Re: You may have gotten a faulty switch. - maverick225 2008-10-22 11:42:32 (34 views)
Buon Giorno a Tutti!!... on a ride home.......... - ITALSKIER 2008-10-22 05:09:54 (176 views) Were your friends 'packin' Sal?! Nice pics! - InTTruder 2008-10-23 03:39:56 (9 views)
About to buy Eibach Coilovers for my TT from a TT owner. Yay or nay? - brat2.ua 2008-10-22 00:37:46 (205 views) I have bought coilovers used and new. It is best when purchased new... - TwisTTer 2008-10-22 18:51:48 (25 views) Ok, my mistake. TAKE 2: I should make it clear that those are 2yrs old NEVER USED. Brand New.. - brat2.ua 2008-10-22 14:00:56 (26 views) should be fine IMO. I believe they have a lifetime warranty on those anyway - TwisTTer 2008-10-22 20:09:10 (16 views) I agree. Expect to replace the dampner portion all around - DumpTTruck 2008-10-22 07:03:16 (23 views) Any reason why? Please read above. - brat2.ua 2008-10-22 14:05:01 (18 views) You should be safe with a 2 years shelf life. - DumpTTruck 2008-10-22 16:42:04 (20 views) on suspension parts.....i prefer new. - TTinCT 2008-10-22 04:40:02 (27 views) x2. never know if a strut is blown. - PracTTical [01TT225] 2008-10-22 05:15:41 (24 views) Why should it be blown a\or bad if its Brand New laying in his basement. Again, never used coilovers - brat2.ua 2008-10-22 12:45:12 (19 views) hijack - Is it snowing up there yet? - roadyTT 2008-10-22 06:24:45 (20 views) sleeted last night... - PracTTical [01TT225] 2008-10-22 08:27:35 (24 views) it can't snow yet, colby still needs to paint his winter wheels. - alms_TT_ny 2008-10-22 06:42:58 (23 views) not going to bother. it will work well with rusted shitty wheels and a bra. - PracTTical [01TT225] 2008-10-22 08:28:07 (28 views)
Joe/gorTT any progress on the sphericals - snowpunk_AGTT 2008-10-22 00:13:04 (138 views) I've had a bad experience with the install > - GorTT 2008-10-22 06:56:06 (112 views) Will, i like the handling as well...but that positive feel for the road isn't jiving with the - kodeTT 2008-10-22 08:10:21 (87 views) that'll work if it's the control arm/bushing connection > - GorTT 2008-10-22 08:23:42 (84 views) the noise came back in my "repaired" rears too - Russ Scott 2008-10-22 13:50:52 (67 views) Wonder if the weather conditions play into this............... - joe@vwvortex 2008-10-22 14:20:58 (55 views) Edited: That's a good point.... since the H2Sport rears are oriented horizontally - Russ Scott 2008-10-22 14:43:05 (63 views) Tom was saying he had a second or third generation improvement > - GorTT 2008-10-22 15:50:27 (46 views) That have or have not been implemented? There are others who make these... - joe@vwvortex 2008-10-22 17:06:38 (69 views) What we need is these tubis modified and do away with the subframe! - TTransport 2008-10-22 19:50:53 (42 views) interesting - yeah, he said an improvement 'had been' made > - GorTT 2008-10-22 17:19:50 (43 views) I've talked to them quite a bit actually............. - joe@vwvortex 2008-10-22 17:32:37 (49 views) damn! > - GorTT 2008-10-22 17:41:15 (41 views) IIRC I gave him your email when I decided to go with H2sport... - joe@vwvortex 2008-10-22 18:04:06 (37 views) Great, thx. > - GorTT 2008-10-22 18:12:57 (38 views) I run the meeting for the Planning Division...... - joe@vwvortex 2008-10-22 18:24:53 (39 views) can we catch you live on the internet? ;-) - GorTT 2008-10-22 18:47:07 (32 views) Actually I think the do broadcast it live - not sure if it's on our website though - joe@vwvortex 2008-10-23 06:31:47 (22 views) we do the same here, and my sentiments exactly! ;-) - GorTT 2008-10-23 06:54:22 (18 views) One day at Streetwerke - I saw a prototype front LCA by CPP for the R32/TT which had three spherical - joe@vwvortex 2008-10-22 15:06:53 (54 views) I spoke to KodeTT......it did not go well......but maybe Joe and Will had a different experience - TTinCT 2008-10-22 04:05:00 (82 views) I'm discussing JB weld or epoxy > - GorTT 2008-10-22 07:01:05 (86 views) After finally installing them correctly - they have been fine - joe@vwvortex 2008-10-22 05:59:28 (109 views) Could you go into detail about the install? - snowpunk_AGTT 2008-10-22 10:07:27 (59 views) The install requires that you press out the OEM bush and then glue in the H2 sport bearing - joe@vwvortex 2008-10-22 13:10:42 (54 views) My knocking may not be the sphericals - TTransport 2008-10-22 08:15:58 (74 views) the operative word being "may" ... ;-) - GorTT 2008-10-22 08:25:48 (68 views) I'd also be curious to see what angle your arms are at during full suspension movement - joe@vwvortex 2008-10-22 08:53:27 (67 views) that's possible, I guess though I've never noticed an indication of that > - GorTT 2008-10-22 09:03:55 (73 views) not sure if i would go this route again. and most likely, thinking about going back to rubber. - kodeTT 2008-10-22 06:21:07 (74 views) WOW This post just completly changed my mind> - VorsprungTT 2008-10-22 08:36:39 (84 views) If your car is lowered more than 1 inch - polys will fail according to powerflex - mine did - joe@vwvortex 2008-10-22 08:48:43 (76 views) My car is lowered more than an inch and>>>> - VorsprungTT 2008-10-22 10:05:14 (71 views) Looking at your sig pict - the poly's wouldn't work - my car isn't that low... - joe@vwvortex 2008-10-22 12:57:40 (55 views) I'm at that same point. I want to make a choice to get my car in spec. - snowpunk_AGTT 2008-10-22 10:28:42 (62 views) Personally - if you don't track the car - go OEM MKI rubber...... - joe@vwvortex 2008-10-22 12:59:57 (61 views) okayI have yet to get to the track so maybe oem will just have to do for now. - snowpunk_AGTT 2008-10-22 15:25:15 (43 views) There is nothing wrong with OEM............. - joe@vwvortex 2008-10-22 15:39:55 (49 views) oh I know, I would like to go to the track with it a lot in the comming year, - snowpunk_AGTT 2008-10-22 16:12:26 (43 views) "Hard on the backroads" is NOTHING like being on track......... - joe@vwvortex 2008-10-22 16:59:14 (48 views) ok well I'll just order a set of stock I guess, thanks Joe :-) - snowpunk_AGTT 2008-10-22 20:57:25 (21 views) I still think this is an issue than can - and will - be worked out successfully, btw. - GorTT 2008-10-22 08:45:02 (60 views) Hans is ok with his polys - I think they're powerflex, but I'm sure he'll post > - GorTT 2008-10-22 08:43:30 (69 views) they are.....and i do>>> - TTinCT 2008-10-22 09:37:33 (79 views) but VorsprungTT is set lower than you...so IMHO, polys are out. - kodeTT 2008-10-22 10:18:17 (58 views) I would venture to guess that the Eibach/Bilstein combo is less than 1" true drop - joe@vwvortex 2008-10-22 09:49:04 (68 views)
Anyone tried this cheap coilover I found on ebay? - LonelyTT 2008-10-21 23:55:23 (66 views) I've seen brand name coilovers for that price, set up an eBay search notification for a few months - sonus 2008-10-22 17:23:27 (18 views) Those look like V-Maxx. In the same boat with you! Try Pete @ Stratmosphere. - brat2.ua 2008-10-22 00:44:19 (55 views) Re: Those look like V-Maxx. In the same boat with you! Try Pete @ Stratmosphere. - Forshaw 2008-10-23 08:15:12 (22 views)
Brakes SUPER Soft after brake rotors/pads/fluid/SS lines change. Is this normal? - brat2.ua 2008-10-21 23:43:06 (83 views) Update on my brakes: - brat2.ua 2008-10-24 14:57:42 (26 views) Maybe I wasn't patient enough with my Hawk ceramics-----> - J. Patterson 2008-10-24 19:29:32 (15 views) Well, i just did the same, smoked them like three times (3x10) with an interval in between... - brat2.ua 2008-10-30 15:12:54 (9 views) dude, it would probably help if you gave details of the parts installed - OldSchool AG 2008-10-22 07:04:39 (43 views) Ok,whats the right way to bleed our system? Linky? Again,he works at a local audi stealership.List- - brat2.ua 2008-10-22 11:47:56 (41 views) I agree with John.... I hate ceramic pads - OldSchool AG 2008-10-22 12:08:53 (37 views) Ok, will try. - brat2.ua 2008-10-22 12:47:34 (27 views) Is it bad to use WD-40 to eliminate brake squeal? - bubba j 2008-10-22 07:58:42 (22 views) i tried that at age 8 on a Huffy with caliper style brakes.... results were bad - OldSchool AG 2008-10-22 12:25:08 (24 views) As other said, not bled properly and probably not bedded in either. - JohnLZ7W 2008-10-22 07:04:04 (26 views) Probably just air in lines and needs good bleed, but---> - J. Patterson 2008-10-22 04:21:35 (60 views) I HOPE its about getting the air out, BUT whats REALLY interesting-i got the EXACT SAME Hawk Ceramic - brat2.ua 2008-10-22 11:36:27 (33 views) Not me. Got a set with 100 miles on them on the shelf. Sorry. - J. Patterson 2008-10-22 12:17:28 (19 views) One more thing. Maybe this will help. Seems to be pretty accurate. - J. Patterson 2008-10-22 12:24:30 (27 views) Sounds like they were not bled properly, or there is oil on the rotors. - MCPaudiTT - DEFCON 1 2008-10-22 03:49:35 (23 views)
Just had a low tire so I went to fill it and found some bad tread ware on inner wall. - snowpunk_AGTT 2008-10-21 22:32:11 (57 views) Just curious, where are you in the NW? - graviTT 2008-10-22 17:55:15 (18 views) Basically Portland. A hand full of TT's down here - snowpunk_AGTT 2008-10-22 20:31:23 (10 views) Is it too early to buy snow tires now, and get the summer tires (18?) next spring? - bubba j 2008-10-22 08:19:32 (35 views) no, not to early, I think I may do this... - snowpunk_AGTT 2008-10-22 12:04:14 (25 views) sell it. - JohnLZ7W 2008-10-22 07:05:34 (18 views) and consider these for your new wheels - JohnLZ7W 2008-10-22 17:47:06 (49 views) lol... I am. I really like the black ch's also but a little more. - snowpunk_AGTT 2008-10-22 20:33:11 (17 views) i have a set of bridgestone 17" that are in excellent shape... - kodeTT 2008-10-22 06:23:34 (31 views) Well I am a little too far to come get them, but thanks... - snowpunk_AGTT 2008-10-22 10:55:51 (15 views) I'll give you mine free* - artinmoTTion 2008-10-22 00:29:24 (48 views) NIce. - GoKart3 2008-10-22 13:58:59 (15 views) Ok, I think you win. I'll give you a call in a few... - snowpunk_AGTT 2008-10-22 10:54:24 (15 views) Dude....... go see Travis for teh alignment and pick up some tires. John or I can hook you - GoKart3 2008-10-21 23:21:09 (30 views) Oh.... and NO Schwab. John can give you my number, and we'll get your - GoKart3 2008-10-21 23:23:13 (25 views) I haven't been there in years, they still that bad huh? - snowpunk_AGTT 2008-10-22 00:07:12 (26 views) Yup... Schwab is still just the Walmart of tires. They work fast, and that's about all - GoKart3 2008-10-22 08:18:52 (25 views) oh how I hate walmart. That is a whole other rant though. I'll stay away from schwabs, scouts honor - snowpunk_AGTT 2008-10-22 12:05:39 (18 views)
Please help with suggestions on this... - TwisTTer 2008-10-21 21:18:53 (346 views) I had brake rust on a set of wheels>> - MoneyShifTT 2008-10-22 09:55:31 (48 views) I think I may have to do that if nothing works. I would hate to have to repaint it... - TwisTTer 2008-10-22 13:25:22 (16 views) man, that looks nasty: rust, color, rash, center cap. I'd use em as winter wheels and buy my baby - TTQ2k2 2008-10-22 06:51:17 (32 views) drastic recommendation...it only occured on one wheel...not all of them - TwisTTer 2008-10-22 13:23:37 (19 views) looks like the brake shavings got embedded into the surface. i usually claybar my wheels - kodeTT 2008-10-22 06:27:09 (29 views) I already replaced the rotor and pad. Just need to clean up the rim. - TwisTTer 2008-10-22 13:20:08 (26 views) once you use claybar on the wheels...never use it on your paints surface... - kodeTT 2008-10-24 06:11:13 (16 views) duly noted. All the pads available are semi metallic compound so I don't have much choice there - TwisTTer 2008-10-24 08:00:42 (12 views) true, but some less than others. were you grinding on the metal-backing plate on the pads? - kodeTT 2008-10-24 08:32:36 (11 views) the rotor was wearing unevenly. All the other rotors and pads were fine... - TwisTTer 2008-10-24 08:41:38 (11 views) if they were stock pads, i'm sure you were getting tired of the black/brown brake dust - kodeTT 2008-10-26 06:15:02 (10 views) it's done. looks like the pad backing plate was being used as brake material - adminisTerTurbo 2008-10-22 05:41:32 (33 views) what do you mean by it's done? how do you know....sorry I couldn't resist :P - TwisTTer 2008-10-22 13:18:05 (20 views) ACID :-) ---------> - J. Patterson 2008-10-22 04:30:55 (38 views) hmmm, I actually purchased it and when I read the label it stated to not use - TwisTTer 2008-10-22 13:11:28 (20 views) I never had the rust to deal with but >> - Scenic Driver 2008-10-22 04:21:43 (121 views) Big 2nd on the P21s Gel...spray on and let it sit for a couple hours - roadyTT 2008-10-22 06:26:35 (24 views) what is the chemical make up of P21S gel??? (if you happen to know) - TwisTTer 2008-10-22 13:27:17 (25 views) ... - Scenic Driver 2008-10-22 16:38:48 (20 views) Where did you guys buy your from? Local? AutoZone? PepBoys? tia - brat2.ua 2008-10-22 12:42:23 (19 views) based on the way the rim rusted>>>> - TTinCT 2008-10-22 04:11:06 (75 views) Hans, the shop that painted the wheels put clear coat on there... - TwisTTer 2008-10-22 13:16:18 (21 views) repost in detailing forum? - artinmoTTion 2008-10-22 00:13:51 (23 views) Didn't think about that. I will post there. Thanks! - TwisTTer 2008-10-22 12:49:56 (24 views) I used goo-gone from home depot. Didn't have as much rust though. Good luck - brat2.ua 2008-10-21 23:48:26 (33 views) but did it work somewhat? - TwisTTer 2008-10-22 13:26:05 (21 views) You kidding??! - brat2.ua 2008-10-22 14:03:49 (24 views) brat YGM - VorsprungTT 2008-10-23 12:51:11 (8 views) Simple green is corrosive to aluminum. - daves85Q 2008-10-21 23:35:20 (46 views) Big Lots? Is that similar to Cotsco? Never heard of that store - TwisTTer 2008-10-22 12:48:05 (27 views) simple green? oxyclean may work too... - snowpunk_AGTT 2008-10-21 22:33:33 (28 views) Already tried simple green. Didn't work. Works great as a degreaser but removing rust...no - TwisTTer 2008-10-22 12:50:48 (17 views) Is putting coke on it a tail from the past? - Preservation (Axel) 2008-10-21 22:02:06 (25 views) I have done that for corrosion on my battery. Would hurt to try on here. - TwisTTer 2008-10-22 12:49:15 (20 views)
starter - onewolf 2008-10-21 20:11:16 (43 views) contact joey at worldimpex.com tell him that charlie sent you. - actorlany 2008-10-22 06:40:49 (19 views) Intarwebz? - roadyTT 2008-10-22 03:45:54 (22 views)
Stereo install on '03 TT Roadster - gotstocks 2008-10-21 19:27:24 (76 views) The crutchfield harness worked just fine with my '01. Surprising that they don't have one for '03. - bubba j 2008-10-22 08:22:09 (18 views) 03 is can bus so you need to get power directly instead of through the - joe@vwvortex 2008-10-21 21:09:33 (55 views) Okay, so I need to get the constant power from a different source because there isn't one in the - gotstocks 2008-10-22 17:15:09 (19 views) Correct. Run a line from a switched power source to your new head unit's supplied harness. - MarTT 2008-10-22 18:22:50 (16 views) Assuming you saw all the FAQ posts, but just in case . . . here's a link: - MarTT 2008-10-21 19:31:53 (71 views) Thank you SO much! What do you think about the HU? - gotstocks 2008-10-21 20:16:47 (36 views) The head unit completely changed the quality of sound as compared to the Bose. - MarTT 2008-10-22 04:00:42 (43 views)
Had a chance to drive one of these today>>> - TTinCT 2008-10-21 18:45:38 (375 views) Nice Digs - VicTTor 2008-10-22 21:13:08 (21 views) Nope.....>>>. - TTinCT 2008-10-22 23:08:17 (24 views) Ahhh right up my alley !! prefere the TC or TD for looks, my opinion - resTTo 2008-10-22 16:40:48 (19 views) ah yes... - ZGTT 2008-10-22 05:59:25 (38 views) yeah...it was interesting>>> - TTinCT 2008-10-22 06:07:59 (33 views) Nice! Matches the White and Red on 356. - Blue TTop 2008-10-21 20:36:12 (20 views) MEH!!!!!! - KrusTTy 2008-10-21 19:53:11 (28 views) hater.... - TTinCT 2008-10-22 04:03:10 (23 views) Why do these cars have such big steering wheels? - Room4TU 2008-10-21 19:05:42 (28 views) with no power steering, you need all the leverage you can get.... - TTinCT 2008-10-21 19:17:51 (26 views) That looks like a lot of fun Hans. - HalleTT 2008-10-21 18:51:12 (31 views) It was.....and it is a small cockpit too! ;-) - TTinCT 2008-10-21 18:53:08 (38 views) just right for meeeeeee....... - ITALSKIER 2008-10-22 05:11:20 (16 views) At least you had convertible to make it easier to get out..... - Greg225TT 2008-10-21 19:17:38 (48 views) felt like that a little myself>>>> - TTinCT 2008-10-21 19:30:22 (34 views)
Rats, ok what parts do I need to fix this? And she was treating me so well! - oc_tt 2008-10-21 18:21:17 (256 views) brake cleaner will clean up the grease - ScratchRob13 2008-10-22 20:39:41 (14 views) Appreciate all the info. Anyone else want to take a gander at recommending a boot vs a new axle? - oc_tt 2008-10-22 14:28:11 (13 views) You need a CV boot. Have the inner done at the same time... - msauve 2008-10-21 18:44:14 (66 views) ok, maybe I'm wrong with my post below, my fault> - Lefko 2008-10-21 18:47:30 (50 views) McPherson strut... - msauve 2008-10-21 18:58:29 (58 views) no need to remove inner, and no need for alignment if... - OldSchool AG 2008-10-21 20:32:56 (44 views) Ya, I assumed easy both ways> - Lefko 2008-10-21 19:04:29 (38 views) I have an outer CV boot kit that I bought for my 02 not realizing at the time I needed an inner boot - Greg225TT 2008-10-21 18:30:59 (45 views) Thanks Greg. - oc_tt 2008-10-21 18:37:16 (41 views) its VERY easy> - Lefko 2008-10-21 18:43:39 (75 views) Thanks, no axles for TTs there. Believe they are a bit more expensive too unfortunately. - oc_tt 2008-10-21 19:15:28 (27 views) what about raxles? they should have TT axles? im assuming.. plus tools to borrow...? - Lefko 2008-10-21 19:17:37 (24 views) Oh yeah, definitely, will need to give them a call. - oc_tt 2008-10-21 19:24:29 (21 views) Toss up> - Lefko 2008-10-21 19:27:38 (25 views) Thanks for all the input. Pics are a good reference. - oc_tt 2008-10-21 19:30:43 (22 views) No prob... you take pics of the mess as well! ;) but remember> - Lefko 2008-10-21 19:34:15 (23 views) If you want to save some cash, I've got the boot (save you some $$$ at the dealer/indy) - Milpower 2008-10-21 18:25:02 (29 views)
Anyone here a pro at installing VAG-com software? Need some help with an ebay cable and computer- - Milpower 2008-10-21 18:12:56 (61 views) Are you using the older - compatible w/eBay cables - version of Ross-Tech's VAG-COM software? - MarTT 2008-10-21 18:49:19 (39 views) nope....409.1. Issue is me not doing something properly. - Milpower 2008-10-21 18:51:04 (33 views) mine said would work with 409, always had trouble.. used the 300 something version - Lefko 2008-10-21 18:52:44 (26 views) OK. I updated my post with a link to the 311.2 software fyi. - MarTT 2008-10-21 18:52:26 (25 views) will try that tomorrow. Thanks. :) - Milpower 2008-10-21 18:57:53 (23 views) Ver 3.11.2 is the latest version that works with my 3rd-party cable.. >> - jhoeppel 2008-10-21 19:09:31 (34 views) Is the ebay cable USB or serial... if USB did you install the driver for it? - KrusTTy 2008-10-21 18:18:32 (33 views) USB. Believe I did (used install.exe program, BUT I don't think the right file is in the folder). - Milpower 2008-10-21 18:23:49 (21 views) maybe try and uninstall... and maybe try the drivers/method i mentioned below? - Lefko 2008-10-21 18:48:59 (21 views) Pls e-mail me the drivers you used. I think one of the problems is I mixed the two drivers- - Milpower 2008-10-21 18:52:14 (26 views) check post below for link to drivers - Lefko 2008-10-21 19:05:55 (18 views) i had an ebay cable, had issues... got it to work> - Lefko 2008-10-21 18:15:39 (34 views) Came from Alpha-bid. Went to FTDI and downloaded software. Not installing the inf files, but - Milpower 2008-10-21 18:20:25 (36 views) hmmm> - Lefko 2008-10-21 18:39:36 (27 views) They supplied the drivers? Do you still have them? Would you e-mail to me? - Milpower 2008-10-21 18:45:00 (21 views) Link inside> - Lefko 2008-10-21 19:05:28 (39 views) You get what you pay for. - msauve 2008-10-21 18:14:00 (52 views) money-back guarantee...only thing lost is time (but might gain some knowledge). - Milpower 2008-10-21 18:21:05 (25 views) You can't buy time. - msauve 2008-10-21 18:27:13 (31 views) Uwe has done great work and I thank him. If I can get a $15 cable to work with his FREE software, - Milpower 2008-10-21 18:45:59 (36 views) Re: ...If I can get a $15 cable to work with his FREE software - msauve 2008-10-21 18:48:09 (48 views) ?? - Milpower 2008-10-21 18:50:21 (18 views) they're not bad for $15 is all you want to do is pull codes> - Lefko 2008-10-21 18:16:52 (28 views) There's a gent here with a cable. Probably should have gone with him first, but wanted to try this - Milpower 2008-10-21 18:26:35 (28 views)
License Plate> - Lefko 2008-10-21 17:27:06 (738 views) MIS MYA4 . . . MIS MYB5 . . . : ) - myers1.8TQTips 2008-10-22 14:04:28 (12 views) MNY PIT. OPN WLT. NEW BTL. - AxeYrCat 2008-10-22 10:40:38 (12 views) Nay - SMOOTTH DON 2008-10-22 08:28:18 (10 views) TMGBLT - bobbyH 2008-10-22 08:23:12 (14 views) TWNTRBO - artinmoTTion 2008-10-22 00:33:38 (16 views) AoASUX - GoKart3 2008-10-21 23:26:14 (21 views) Play off the last one and add spaces. - snowpunk_AGTT 2008-10-21 22:08:17 (27 views) POORSHA - Ramsey 2008-10-21 21:45:41 (13 views) 4NIC8 FTW - retloctt 2008-10-21 19:16:29 (26 views) Re:BYAJPCR - gomezTT 2008-10-21 18:42:38 (19 views) FAA Q - TTBlack 2008-10-21 17:49:47 (25 views) LEMONS - Horch it 2008-10-21 17:47:06 (31 views) speaking of Lemons... - mad scientist 2008-10-21 20:07:33 (36 views) Re: speaking of Lemons... - Horch it 2008-10-27 07:42:09 (13 views) you can pick up an 'M' helmet relatively cheap - mad scientist 2008-10-27 18:01:14 (12 views) I'd have to assume another TT owner already has this! ;) - Lefko 2008-10-21 17:50:59 (34 views) for jersey - Horch it 2008-10-21 18:03:30 (21 views) PB4UGO - msauve 2008-10-21 17:42:45 (20 views) BROKEN... SNPPED... DMBASS - KrusTTy 2008-10-21 17:37:21 (26 views) CPO OVER...NO WRNTY...OH SNAP...OH NOES - roadyTT 2008-10-21 17:59:04 (30 views) BNTVALV....NEWPSTN...REBILD....IBRKIT...W82LONG...NEWNGN - PracTTical [01TT225] 2008-10-21 20:04:56 (21 views) HNDS DRTY.... FUN BGNS :-P - Lefko 2008-10-21 18:08:26 (22 views)
Radio flashing 'Diagnose' while driving home..> - TToneSpasm 2008-10-21 17:15:08 (41 views) it's your big brake kit. you need to take it off and sell it to me. - PracTTical [01TT225] 2008-10-21 20:06:28 (15 views) No no no :-) - TToneSpasm 2008-10-21 20:16:48 (12 views) mine did that in the A4 once or twice, radio never cut out though - Lefko 2008-10-21 17:34:55 (25 views)
Installing start button in dash. - HugeTTs 2008-10-21 17:05:59 (96 views) ...just inviting the "blue screen of death." - msauve 2008-10-21 17:19:17 (33 views) Why? You'd still have to use the key in the ignition... an additional step seems pointless no? - Lefko 2008-10-21 17:18:53 (26 views) You question a TT owner's quest for something that looks good? - ClarkSJ 2008-10-21 17:19:58 (31 views) LOL. - msauve 2008-10-21 17:42:09 (39 views) I'm not saying it doesnt look cool, I think it does.> - Lefko 2008-10-21 17:26:08 (49 views)
I love Chemtool B-12 (used a combination of it, Castrol & kerosene to clean and lube my weapons - Milpower 2008-10-21 15:25:03 (77 views) oh sure... the PCV system and a firearm have so much in common, i can totally see - Mr.Fun 2008-10-21 20:37:39 (29 views) Ballistol for cleaning. Militec-1 for lube. - msauve 2008-10-21 16:20:05 (31 views) Lube, Suck, Shoot, Squirt, Open it up and Squirt.. - esanmiguel 2008-10-21 15:45:43 (50 views) "The Suck" is a euphenism for Iraq (or Afghan, or anywhere else over there where it sucks). - Milpower 2008-10-21 15:56:11 (50 views) Some things never change - pmarcian 2008-10-21 17:30:30 (37 views) Saudi...MILES of hot desert with trash blowing everywhere...how do ppl live there? - Milpower 2008-10-21 17:59:18 (27 views)
More on Timing Belt Settlement - fredyTT 2008-10-21 15:15:44 (149 views) Huh? "Last updated on July 24, 2008" - msauve 2008-10-21 15:20:14 (32 views) Yeah I saw that too but I did receive postcard today - fredyTT 2008-10-21 15:29:28 (52 views)
I HATE the Toyota Prius and its drivers.... - \|everso!\| 2008-10-21 13:18:40 (221 views) reason for driving so slow...there are those that try to squeeze the last drop and get over 60mpg. - kodeTT 2008-10-22 06:36:25 (22 views) Oh, come now... What about those poser TT owners? - Rawhide Rosenwad 2008-10-22 06:01:23 (15 views) Matt and Trey sum it up PERFECTLY! - Regina_TTS_is a dude 2008-10-21 17:01:26 (148 views) GOOD FOR YOU...THHHHAAAAANKS! - actorlany 2008-10-22 06:43:26 (18 views) Pious owners. - RSpdstr 2008-10-21 16:14:09 (24 views) Right on point, in socal its all slow prius drivers in the car pool lane in rush hour.DRIVES ME NUTS - unobTTainum 2008-10-21 16:06:34 (30 views) Re: Right on point, in socal its all slow prius drivers in the car pool lane in rush hour.DRIVES ME - ScoTTyNeutron 2008-10-21 16:37:05 (31 views) I wonder if there is a Halloween Costume in the likeness of a Prius? - revisiTTed 2008-10-21 16:00:38 (27 views) my take on the prius- I think many people are attracted to the "styling" of the prius...> - alms_TT_ny 2008-10-21 14:33:57 (65 views) Wait until they have to replace the batteries! - TTGram 2008-10-21 15:55:31 (19 views) agreed....it is an 'anti car' statement.... - \|everso!\| 2008-10-21 14:49:01 (38 views) Prius Body kit - esanmiguel 2008-10-21 14:24:49 (197 views) wow, it took the fugliness to a whole new level - TwisTTer 2008-10-21 14:53:13 (24 views) heh, funny part about this was when i clicked your sig came up before the prius. LOL - Lefko 2008-10-21 14:44:17 (21 views) i can't even get myself to say something clever! LOL - \|everso!\| 2008-10-21 14:29:16 (30 views) same. hate. so much. - PracTTical [01TT225] 2008-10-21 13:58:00 (23 views) I had one beat me when I was running on 3 cylinders. Really! - revisiTTed 2008-10-21 13:47:07 (49 views) Can I have "Things I would never admit to" for $100, Alex? - roadyTT 2008-10-21 14:18:40 (25 views) dang, they are fast and hostile here - adminisTerTurbo 2008-10-21 13:43:16 (56 views) I hear they are a special breed >> - Scenic Driver 2008-10-21 13:48:48 (47 views) i thought i remembered something about vtech kicking in yo. - adminisTerTurbo 2008-10-21 18:06:00 (21 views) ooo...Prius torque curve! - \|everso!\| 2008-10-21 13:45:30 (38 views) Most of them are Democrats :-) - J. Patterson 2008-10-21 13:38:35 (28 views) except for the ones that aren't - TTQ2k2 2008-10-21 13:41:02 (31 views) McCain bought a prius...and probably hates it too. - \|everso!\| 2008-10-21 13:44:27 (50 views) so much so that Cindy McCain does donuts in her parking lot with it - TwisTTer 2008-10-21 14:52:13 (24 views)