Need help locating Evap Leak
#1
Audiworld Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Need help locating Evap Leak
Hey guys,
Code P2404. I changed the purge valve. I looked around for any cracked hoses, and I found out that my vaccum hose had to be replaced, but that had nothing to do with the P2404, it was for bank 1 running lean.
Now, it might be my Leak Detection pump, but I have no idea where to spot that. I follow the line that's supposed to go from the canister that the purge valve goes into, but it seems to lead back the same way as the hose that comes into the purge valve. I noticed that whatever this is, multiple hoses go through it, and I can see that it is cracked, and I can see some wires inside it. Also, where the purge valve goes into the canister, there's nothing really holding it in place other than a grommet, and there's a little piece of plastic sticking out the side of where the purge valve goes in the canister's grommet, like it's not meant to be there, and like it could cause a leak.
So, I guess this all leads to one question: how, specifically, do I get to the Leak detection pump? I know it's on the passenger side fender line, but I need more specific directions or pictures.
Code P2404. I changed the purge valve. I looked around for any cracked hoses, and I found out that my vaccum hose had to be replaced, but that had nothing to do with the P2404, it was for bank 1 running lean.
Now, it might be my Leak Detection pump, but I have no idea where to spot that. I follow the line that's supposed to go from the canister that the purge valve goes into, but it seems to lead back the same way as the hose that comes into the purge valve. I noticed that whatever this is, multiple hoses go through it, and I can see that it is cracked, and I can see some wires inside it. Also, where the purge valve goes into the canister, there's nothing really holding it in place other than a grommet, and there's a little piece of plastic sticking out the side of where the purge valve goes in the canister's grommet, like it's not meant to be there, and like it could cause a leak.
So, I guess this all leads to one question: how, specifically, do I get to the Leak detection pump? I know it's on the passenger side fender line, but I need more specific directions or pictures.
Thread
Thread Starter
Forum
Replies
Last Post
kpatz
A4 (B6 Platform) Discussion
15
11-26-2017 05:13 PM
Rick 601
A6 / S6 (C5 Platform) Discussion
3
08-15-2007 09:41 AM
reefer_bob
S4 / RS4 (B5 Platform) Discussion
6
07-01-2006 09:34 PM
aerohr
Audi 5000 / 200 / V8 Discussion
3
02-13-2006 03:43 PM