Larrytt

<img src="http://www.jingleuniversity.com/images/homer.jpg">

yes, I know it is his jacket, could not find a pic of the mr. Plow truck! lol

PaTT

Ak - you need to add this element to your sig

Ryan E.

Hey AkRascal.

I installed a set of MKI's front control arms last Spring. Here is my suspension setup:

MKI Front Lower Control Arms

Stock 225 TT front bar (22mm?) - should be the same as your post recall bar.

H&amp;R Sport Springs

Bilstein Shocks

Neuspeed 19mm Rear Sway Bar

KMAC rear camber kit

6mm spacer up front, 15mm spacer in rear

225/40/18 tires up front, 255/35/18 in rear


I am very happy with this setup. Virutally all plowing is gone and it is very easy to rotate the car. In fact it rotates so easily that it can be scary in the rain. :-)

You may find that the rear bar is all you need to counteract the 22mm front. It may be easier to replace the rear than to do the front also.

Just some thoughts....

-Ryan E.

karTT

<img src="http://junescottdesign.com/images/barney.gif">

joe@vwvortex

4mm difference is huge.

Colonel Bogey

I run my '02 TTR with this configuration - better than 1st gen bars &amp; MkI.