brillianTTdc

I am routing a remote mute switch for my V1 and need to run the cable inside of my steering column. Unfortunately, I don't have the Bentley manual yet and was wondering if anyone had any hints for how to open the steering column and if there is anything else I should know. Thanks in advance for any thoughts!

MCPaudiTT - DEFCON 1

There are two holes at the underside of the steering column cover:

<img src="http://images12.fotki.com/v240/photos/4/435091/2778322/eeringwheelcoverremoval2screws-vi.jpg">

You need a screwdriver with a small tipped end on it to engage the Phillips-head screws:

<img src="http://images12.fotki.com/v237/photos/4/435091/2778322/35Coverscrews-vi.jpg">

With the screws out, you can lift the top cover (it works easier if you have lowered the steering wheel adjustment all the way down):

<img src="http://images15.fotki.com/v235/photos/4/435091/2778322/36Coverlifted-vi.jpg">

Continue lifting up:

<img src="http://images18.fotki.com/v231/photos/4/435091/2778322/38Coveroff-vi.jpg">

And finally it comes completely off:

<img src="http://images15.fotki.com/v245/photos/4/435091/2778322/39Steeringwiring-vi.jpg">

brillianTTdc

You rule. Thank you much for the instructions!

bfbarosky

My problem is with the lower section. I already removed the 2 phillips screws in the front of the lower cover (behind the steering wheel).
Someone mentioned another connection point at the ignition switch but I don't see anything there on my 2002 A6.

bobkay

Stop the car before attempting this.