Bypassing the stubborn pinch bolt...lots of pics
#1
AudiWorld Senior Member
Thread Starter
Bypassing the stubborn pinch bolt...lots of pics
Didn't want the mess of cutting the bolt, didn't have the tools anyway so we bypassed it altogether. It takes two people to do this has ones has to steady the strut over the bottom control arm and the other had to stand on a pry bar to bottom out the drive line against the subframe, also you have to unbolt the sway bar link. The prying doesn't damage anything as long as you watch the cv boot and the brake lines. I didn't do a step by step as i didn't have time. I tried to hammer out the pinchbolt for hours and it didn't even budge. This works and the new springs and struts went back in easy. I would say had i known this i could have done the front in a couple of hours. i went with bilstein sports and eibach since this is my DD and i have clients in the car all the time so i can't have it too stiff with coil overs.
<img src="http://www.pbase.com/ocotillo/image/76450775.jpg">
Pinchbolt still intact
<img src="http://www.pbase.com/ocotillo/image/76450792.jpg">
you have to unbolt the sway bar also
<img src="http://www.pbase.com/ocotillo/image/76450985.jpg">
new bilsteins and eibachs, went in way easier than the old ones came out (had to wait four mos. for those danm springs. H&R and Eibach were both out of them last fall. Avants are so uncommon!)
<img src="http://www.pbase.com/ocotillo/image/76451141.jpg">
DONE!!!
Below is some before and afters
<img src="http://www.pbase.com/ocotillo/image/76450683.jpg">
<img src="http://www.pbase.com/ocotillo/image/76451285.jpg">
<img src="http://www.pbase.com/ocotillo/image/76450750.jpg">
<img src="http://www.pbase.com/ocotillo/image/76451222.jpg">
<img src="http://www.pbase.com/ocotillo/image/76450775.jpg">
Pinchbolt still intact
<img src="http://www.pbase.com/ocotillo/image/76450792.jpg">
you have to unbolt the sway bar also
<img src="http://www.pbase.com/ocotillo/image/76450985.jpg">
new bilsteins and eibachs, went in way easier than the old ones came out (had to wait four mos. for those danm springs. H&R and Eibach were both out of them last fall. Avants are so uncommon!)
<img src="http://www.pbase.com/ocotillo/image/76451141.jpg">
DONE!!!
Below is some before and afters
<img src="http://www.pbase.com/ocotillo/image/76450683.jpg">
<img src="http://www.pbase.com/ocotillo/image/76451285.jpg">
<img src="http://www.pbase.com/ocotillo/image/76450750.jpg">
<img src="http://www.pbase.com/ocotillo/image/76451222.jpg">
Thread
Thread Starter
Forum
Replies
Last Post
JPCady
Audi 90 / 80 / Coupe quattro / Cabriolet
1
07-20-2005 10:12 AM
Rick 601
Audi 100 / A6 (C4 Platform)
2
06-10-2004 01:50 PM