Brake pad wear sensor.....

Silvr1.8T · 11-09-2002, 05:06 AM

After installing Stoptech Club Race pads in the front and Porterfield R4S pads in the rear, I went to the track and did lapped for a whole day with like 4 20 minute sessions. The next day, my pad wear sensor came on, yet the pads were fine. I turned the car off and back on and it went away. After this it has been intermitently coming on and goes away if I turn the car off for a few seconds and back on. Is the pad wear sensor for the front or rear brakes? Perhaps the heat from the brakes damaged the modification to the pad wear sensor I made when installing th Stoptechs? What do you think?

Warren Wang · 11-09-2002, 07:50 AM

Cut the wires coming off the pad, short them, and plug them into the harness. No more light. Just look at the pads.

Warren

Silvr1.8T · 11-09-2002, 07:20 PM

11-09-2002, 07:50 AM	#2
Warren Wang AudiWorld Super User Garage is empty, add now Join Date: Mar 2000 Posts: 2,358	Re: Brake pad wear sensor..... Cut the wires coming off the pad, short them, and plug them into the harness. No more light. Just look at the pads. Warren

11-09-2002, 07:20 PM	#3
Silvr1.8T Junior Member Garage is empty, add now Join Date: Sep 2000 Posts: 815	That is what I did, I cut the two wires soldered them together and pluged into the harness.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

11-09-2002, 07:20 PM
AudiWorld Audi R8 Paid Advertisement