You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!
NEW FEATURE at AudiWorld!!! We now have a fully integrated Wiki!!
Check it out!
For full post editing rights, please reply to this thread. Thanks!
For tips on using the forums please visit the following page: Forum Tips Be sure to check out Threaded View!!!
facebook users, please become a fan of AudiWorld's page
We've gotten complaints about spam/virus Private Messages. Any such messages are completely bogus, and should be ignored completely. Read more here.
Hey all, just wondering if anyone knew if the 17" R28s were the correct offset for an 8.5" wide rim. I ask because a friend had emailed me about the offset, and had this to say:
"Let's see: stock 16x7 are E46. so the difference in width of the wheels is 1.5" or .75" added to either side of the wheel centerline. This becomes 19mm. The difference in offset between the two wheels is really 11mm. So from the math there is some difference (7mm)."
This concerns me since my A4 is in need of a new bearing at only 22K. It's going in the shop tomarrow...last thing I need is a dealer telling me no dice on the bearing due to my aftermarket wheels.