MMI Screen Repair Instructions
#1
AudiWorld Super User
Thread Starter
MMI Screen Repair Instructions
This one was pulled out from the car and screen was removed, but none of these should be done. This procedure can be done inside the car without unplugging any wires.
If you need the gear PM me. If you already have one just go ahead.
Comments and questions welcomed.
If you need the gear PM me. If you already have one just go ahead.
Comments and questions welcomed.
Last edited by mishar; 06-19-2013 at 10:43 PM.
The following 2 users liked this post by mishar:
Feri (05-11-2022),
seattlematt (01-14-2020)
The following users liked this post:
Radius@9 (12-15-2021)
Trending Topics
#9
AudiWorld Super User
Thread Starter
I took my gear out and am having trouble meshing the gears back in together.
And how are you supposed to screw the MMI screen back in? Isn't the wood cover at the top in the way?
My string for my motor is loose as well.
This string should be tight? This is to prevent vibration?
And how are you supposed to screw the MMI screen back in? Isn't the wood cover at the top in the way?
My string for my motor is loose as well.
This string should be tight? This is to prevent vibration?
You should not take apart screen at the first place, so screw it back before you synchronize lid and screen. Last moment to do that is before you put the motor back. Somewhere half way between closed and opened there is a position where you can reach with screwdriver and tight those screws.
Can you explain what string you are talking about?