Parting '94 100CSQ Avant w/176k

Zeitgeist 13 · 05-02-2012, 10:50 AM

The demise of the silver wagon's heater core and RS body damage convinced me to consolidate my fleet and concentrate on keeping the green wagon on the road. Its silver with black leather interior. The seats are in really good condition, as are the door panels etc. I'm installing the engine in my Vanagon, but everything else except the head/fog lights are up for grabs. Let me know if you need anything. Has a locking rear diff.

Does anyone know if the engine management requires the instrument cluster to be attached. I'll obviously need to familiarize myself with the wiring harness prior to the engine swap, but I'm just wondering if the cluster is part of an immobilizer circuit.

Thanks,
Casey

Wahaudi · 05-25-2012, 09:10 PM

I could use some rear headrest. I have a 100S sedan. Are they the same headrest?

Thanks.

A6Gary · 05-26-2012, 10:38 PM

Your '91 100, which is a C3 platform, is not a C4 platform, which covers '92 – '97 100s/A6s. So, your headrest is most likely not the same.

Wahaudi · 06-04-2012, 07:57 PM

Oops. need to update my garage. Just bought a 94 100S to mess around with. Pearl white over black.

Brad Weingartner · 06-05-2012, 05:26 PM

Where are you located? Cascadia I assume is on west coast?

I need all of the Avant specific black interior parts from the rear seat back to the rear. Rear door cards would be nice too for the speakers. Shipping is probably going to be prohibitive but it's worth a shot.

I'm parting a 1995 Pearl/Black Sedan and swapping the interior into my Green/Tan Avant and would love to complete the job!!!

Also, to the person needing a headrest, if the Avant and Sedan are different (and they do appear to be), I have the headrest you need.

Zeitgeist 13 · 06-11-2012, 12:25 PM

Bummer man, I sent it off to the crusher with nearly all of the interior panels (sans wood) and the complete rear seat assembly. I still have the front seats and all the wood, as well as nearly the entire wiring harness <-- that, my friends was a big job to remove. The auto trans is also available.

Brad Weingartner · 06-11-2012, 12:29 PM

Just dropped mine at the scrappers today too. Also pulled the entire interior and wiring harness, and drivetrain. I agree, it was a huge ****ing job.

upallnight · 06-11-2012, 07:22 PM

Any pic of the front seats? What are you asking for them and what will the shipping be to 60616?

Zeitgeist 13 · 06-13-2012, 08:42 AM

There's just a little wear on the drivers bolster, and a few funky little marks on the passenger seat cushion.

Shipping would be...interesting. I'm in 98501

05-25-2012, 09:10 PM	#2
Wahaudi AudiWorld Member Garage is empty, add now Join Date: Apr 2002 Posts: 122	Parting out I could use some rear headrest. I have a 100S sedan. Are they the same headrest? Thanks. __________________ '94 100S '01 S8 '97 A8 '91 100 '89 100Q and @ 25 others

06-04-2012, 07:57 PM	#4
Wahaudi AudiWorld Member Garage is empty, add now Join Date: Apr 2002 Posts: 122	Oops. need to update my garage. Just bought a 94 100S to mess around with. Pearl white over black. __________________ '94 100S '01 S8 '97 A8 '91 100 '89 100Q and @ 25 others

06-11-2012, 12:25 PM	#6
Zeitgeist 13 Audiworld Junior Member Garage is empty, add now Join Date: Mar 2009 Location: Cascadia Posts: 28	Bummer man, I sent it off to the crusher with nearly all of the interior panels (sans wood) and the complete rear seat assembly. I still have the front seats and all the wood, as well as nearly the entire wiring harness <-- that, my friends was a big job to remove. The auto trans is also available. __________________ '94 Audi 100CSQ Avant '90 MB 300D 2.5t '87 MB 300TD 24v Sportline '89 Bluestar

06-13-2012, 08:42 AM	#9
Zeitgeist 13 Audiworld Junior Member Garage is empty, add now Join Date: Mar 2009 Location: Cascadia Posts: 28	There's just a little wear on the drivers bolster, and a few funky little marks on the passenger seat cushion. Shipping would be...interesting. I'm in 98501 __________________ '94 Audi 100CSQ Avant '90 MB 300D 2.5t '87 MB 300TD 24v Sportline '89 Bluestar

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-26-2012, 10:38 PM	#3
A6Gary AudiWorld Super User Garage is empty, add now Join Date: Jan 2003 Posts: 5,370	Your '91 100, which is a C3 platform, is not a C4 platform, which covers '92 – '97 100s/A6s. So, your headrest is most likely not the same.

06-05-2012, 05:26 PM	#5
Brad Weingartner AudiWorld Newcomer Garage is empty, add now Join Date: Apr 2006 Posts: 8	Where are you located? Cascadia I assume is on west coast? I need all of the Avant specific black interior parts from the rear seat back to the rear. Rear door cards would be nice too for the speakers. Shipping is probably going to be prohibitive but it's worth a shot. I'm parting a 1995 Pearl/Black Sedan and swapping the interior into my Green/Tan Avant and would love to complete the job!!! Also, to the person needing a headrest, if the Avant and Sedan are different (and they do appear to be), I have the headrest you need.

06-11-2012, 12:29 PM	#7
Brad Weingartner AudiWorld Newcomer Garage is empty, add now Join Date: Apr 2006 Posts: 8	Just dropped mine at the scrappers today too. Also pulled the entire interior and wiring harness, and drivetrain. I agree, it was a huge ****ing job.

06-11-2012, 07:22 PM	#8
upallnight AudiWorld Member Garage is empty, add now Join Date: Dec 2002 Posts: 141	Any pic of the front seats? What are you asking for them and what will the shipping be to 60616?