Brake Pads: Centric Posi-Quiet vs Hawk LTS or ceramic

krick · 03-07-2012, 10:53 AM

Hi all - getting ready to put new pads on and even though I've used the Hawk LTS pads in the past, I've seen some recs on the Posi-Quiets and was wondering if anyone had any experience with both brands and could compare the Posi-Quiets to either the LTS or ceramics. Thanks in advance.

Sherblatz · 03-09-2012, 07:15 PM

I can't speak to either the posi or LTS, but I've been very, very happy with Hawk ceramics. 99% of OEM grip, no squeeling, and almost zero brake dust. We can go months and the wheels still look good vs. 1 week on stock pads.

I haven't had them long enough to say, but the ceramics are supposed to last about 2X the stock pads.

Jimbo

arkbbq · 03-09-2012, 08:10 PM

Had the dealer install Hawk ceramics on my 333hp TFSI when new. 18K miles later, same good results as Sherblatz.

-ark

phil47 · 03-09-2012, 09:42 PM

Quote:

Originally Posted by arkbbq

Had the dealer install Hawk ceramics on my 333hp TFSI when new. 18K miles later, same good results as Sherblatz.

-ark

+3. Love mine!

phidailo · 03-09-2012, 11:08 PM

I felt that the Hawk Ceramics did not bite as well as OEM. They did not have any brake dust but it's not worth it losing the stopping power. When it's time for brake change, I will give the LTS a try, which should be in the middle of the two.

Sherblatz · 03-10-2012, 06:02 AM

Quote:

Originally Posted by phidailo

I felt that the Hawk Ceramics did not bite as well as OEM. They did not have any brake dust but it's not worth it losing the stopping power. When it's time for brake change, I will give the LTS a try, which should be in the middle of the two.

The ceramics do have a different feel when completely cold and only using light pressure, but they were impressive the few times I've had to stop somewhat fast. They definitely have the bite when you need it.

Jimbo

xlr8it · 03-10-2012, 11:49 AM

I must agree with ceramics, not as sensitive but stop just as well, no dust , no noise. had them on for six months now and love them.

achun · 03-10-2012, 02:18 PM

Another option is the Axis Ultimate. The initial bite is just as good as OEM if not better and are smoother. They are not dust free but at least half of stock. I've used them on many cars and have had them on the Q7 for about 1000 miles now. When braking hard, the car does not nose dive as much.

Sherblatz · 03-12-2012, 04:26 PM

Quote:

Originally Posted by achun

When braking hard, the car does not nose dive as much.

That would indicate less stopping power on your front brakes unless you also did something to your suspension. SInce I doubt either has occurred, my bet would be on change in driving style.

Jimbo

achun · 03-12-2012, 07:45 PM

Quote:

Originally Posted by Sherblatz

That would indicate less stopping power on your front brakes unless you also did something to your suspension. SInce I doubt either has occurred, my bet would be on change in driving style.

Jimbo

The only change in driving style would be that I drive more aggressively if anything because I have more confidence in the brakes now. I can't compare the Axxis Ultimate to either of the Hawks but I have used these Axxis pads on 5 different cars all with similar results.

03-09-2012, 07:15 PM	#2
Sherblatz AudiWorld Member Garage is empty, add now Join Date: Jul 2008 Posts: 185	I can't speak to either the posi or LTS, but I've been very, very happy with Hawk ceramics. 99% of OEM grip, no squeeling, and almost zero brake dust. We can go months and the wheels still look good vs. 1 week on stock pads. I haven't had them long enough to say, but the ceramics are supposed to last about 2X the stock pads. Jimbo __________________ Jimbo 2007 Q7 3.6 Premium S-Line 2003 WRX 2002 S2000 Last edited by Sherblatz; 03-10-2012 at 05:59 AM.

03-10-2012, 11:49 AM	#7
xlr8it AudiWorld Member Garage is empty, add now Join Date: Mar 2011 Location: Australia Posts: 103	I must agree with ceramics, not as sensitive but stop just as well, no dust , no noise. had them on for six months now and love them. __________________ Audi Q7 TDI BMW E90 320D Honda Valkyrie 2012 HD Fatboy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

03-09-2012, 08:10 PM	#3
arkbbq AudiWorld Member Garage is empty, add now Join Date: Apr 2006 Location: Texas Posts: 353	Had the dealer install Hawk ceramics on my 333hp TFSI when new. 18K miles later, same good results as Sherblatz. -ark

03-09-2012, 11:08 PM	#5
phidailo Audiworld Junior Member Garage is empty, add now Join Date: Oct 2011 Posts: 63	I felt that the Hawk Ceramics did not bite as well as OEM. They did not have any brake dust but it's not worth it losing the stopping power. When it's time for brake change, I will give the LTS a try, which should be in the middle of the two.

03-10-2012, 02:18 PM	#8
achun Audiworld Junior Member Garage is empty, add now Join Date: Feb 2006 Posts: 22	Another option is the Axis Ultimate. The initial bite is just as good as OEM if not better and are smoother. They are not dust free but at least half of stock. I've used them on many cars and have had them on the Q7 for about 1000 miles now. When braking hard, the car does not nose dive as much.

03-12-2012, 07:45 PM
AudiWorld Audi R8 Paid Advertisement