Is there somebody in the Gwinnett area that can help me install my ecodes? I'll buy beer :)

mdcbuym · 02-19-2003, 10:18 PM

RobC · 02-20-2003, 05:59 AM

Are you looking for someone who's done this before or just someone to give you a hand?

I'll be glad to give you hand. I've got tons of tools and a garage to work in. I live in Duluth off of Old Peachtree Rd.

Shoot me an email.

Carguy427 · 02-20-2003, 04:48 PM

I have not done an e-code install, but I would like to help.

octane 93 · 02-21-2003, 06:54 AM

i did the install twice before and its really not that hard. i live in athens but i'll be in lawrenceville tomorrow working on my stereo installation. drop me a line when you decide what to do...

davidm@uga.edu

mdcbuym · 02-21-2003, 08:32 AM

but if you know how to wire it without the harness let me know. As far as your stereo installation, what are you getting? I can help you with that, I did a few instalations before.

mdcbuym · 02-21-2003, 08:34 AM

octane 93 · 02-21-2003, 11:26 AM

it would be a pain in the *** to do the install without the harnesses... i wouldnt recommend trying

i'm basicly reinstallaing the stereo from my previous A4 2.8. if you know of any places to get good quality amplifers at a reasonable price around town let me know. i also need to purchase the 6.5" coaxials for the rear doors, but i'm leaning towards a set of JLs i will get off ebay.

here is my component list

stuff from old install
Sony m750 headunit
MB Quart Q series 5.25" components
JL stealthbox
Sony ES amp (probably woln't use)
Xtant 121m (dont want to reuse =)

new stuff to install
sony XM tuner / antenna
6.5" co-axial speakers for rear doors
all new wiring
new amp, probably a JL 500/5

octane 93 · 02-21-2003, 11:29 AM

i should mention that if you'd like to meet me at my folks house for your ecode install, my pops has a air-powered mini hack-saw like tool. it eats right through the sheet metal (makes it a little scary) but it produces a very nice and clean result.

did we meet at the Andretti racing event back in January? My memory is not very good at all =)

02-20-2003, 05:59 AM	#2
RobC AudiWorld Super User 2013 Audi S6 My Garage Join Date: Mar 2000 Location: Duluth, GA Posts: 2,477	Re: Is there somebody in the Gwinnett area that can help me install my ecodes? I'll buy beer :) Are you looking for someone who's done this before or just someone to give you a hand? I'll be glad to give you hand. I've got tons of tools and a garage to work in. I live in Duluth off of Old Peachtree Rd. Shoot me an email. __________________ Robert Cheng 2010 S4, 6-spd, Meteor Gray, Prestige, Sport Diff, Strat shifter, H&R Rear Sway 2013 S6, Estoril Blue, B&O, LED, cold weather, comfort seats, 20", rear shade, BBS CH-R 20x9 ET25

02-20-2003, 04:48 PM	#3
Carguy427 Junior Member Garage is empty, add now Join Date: Sep 2002 Posts: 680	I wouldn't mind helping out either. If you guys wouldn't mind another hand. I have not done an e-code install, but I would like to help. __________________

02-21-2003, 06:54 AM	#4
octane 93 Junior Member Garage is empty, add now Join Date: Jun 2000 Posts: 1,147	I could possibly help you tomorrow... my folks live in lawrenceville i did the install twice before and its really not that hard. i live in athens but i'll be in lawrenceville tomorrow working on my stereo installation. drop me a line when you decide what to do... davidm@uga.edu __________________

02-21-2003, 08:32 AM	#5
mdcbuym AudiWorld Super User Garage is empty, add now Join Date: Sep 2002 Posts: 2,224	I'm going to have to wait, since Jim Ellis didn't have the wiring harness in stock... but if you know how to wire it without the harness let me know. As far as your stereo installation, what are you getting? I can help you with that, I did a few instalations before. __________________ ---------------------------------------- darkonikic AT gmail DOT com

02-21-2003, 08:34 AM	#6
mdcbuym AudiWorld Super User Garage is empty, add now Join Date: Sep 2002 Posts: 2,224	I'm not sure when I'll be installing them since I have to wait for the harness, I'll let you know __________________ ---------------------------------------- darkonikic AT gmail DOT com

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

02-21-2003, 11:26 AM	#7
octane 93 Junior Member Garage is empty, add now Join Date: Jun 2000 Posts: 1,147	you didn't get the harnesses with the e-codes? both my sets included them it would be a pain in the *** to do the install without the harnesses... i wouldnt recommend trying i'm basicly reinstallaing the stereo from my previous A4 2.8. if you know of any places to get good quality amplifers at a reasonable price around town let me know. i also need to purchase the 6.5" coaxials for the rear doors, but i'm leaning towards a set of JLs i will get off ebay. here is my component list stuff from old install Sony m750 headunit MB Quart Q series 5.25" components JL stealthbox Sony ES amp (probably woln't use) Xtant 121m (dont want to reuse =) new stuff to install sony XM tuner / antenna 6.5" co-axial speakers for rear doors all new wiring new amp, probably a JL 500/5 __________________

02-21-2003, 11:29 AM	#8
octane 93 Junior Member Garage is empty, add now Join Date: Jun 2000 Posts: 1,147	oh yea i should mention that if you'd like to meet me at my folks house for your ecode install, my pops has a air-powered mini hack-saw like tool. it eats right through the sheet metal (makes it a little scary) but it produces a very nice and clean result. did we meet at the Andretti racing event back in January? My memory is not very good at all =) __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode