So who is gonna help me install my 1pice headlights?

Sugar T · 09-07-2002, 12:27 AM

anyone in the littleton area want to help me install the headlights i sould be getting by next weekend?

Malcolm100CSq · 09-07-2002, 08:58 AM

Sugar T · 09-07-2002, 11:51 PM

HPH · 09-08-2002, 07:39 AM

...then you know what it's about and you're probably looking for an extra pair of hands.I'm afraid I can't help there.

If you don't have the manual, you should get one. The first step in removing and replacing headlights is "remove the front bumper." One of the first steps in removing the bumper is "loosen the wheel housing."

I would NOT recommend doing this without the instructions for reassembling the entire car (i.e., get the manual), as it looks as if there's lots of taking apart and putting back together to do. HPH

randy@5280 · 09-10-2002, 09:12 AM

Send me an email and let me know...

Randy

nuje · 09-16-2002, 12:06 PM

Did the euro conversion about a year ago on my '97 which of course meant cutting the fender...a job I slouched off to my dad. We didn't have to do anything fancy like removing the bumper, but it was a bit touchy to slide them in. I personally wasn't too concerned cuz my paint's all messed up.

09-07-2002, 08:58 AM	#2
Malcolm100CSq Junior Member Garage is empty, add now Join Date: Jan 2002 Posts: 600	OK, I give up - what are "1pice" headlights? __________________ Malcolm in Candler, North Carolina 1993 100CS quattro sedan, black Autobox, travertine leather, 115K miles Clear corners, de-badged (except rings) Remote entry/locking converted to RF

09-07-2002, 11:51 PM	#3
Sugar T Junior Member Garage is empty, add now Join Date: Jun 2002 Posts: 539	One piece euro lights here is a pic of the ones i ordered from CMC

09-08-2002, 07:39 AM	#4
HPH AudiWorld Super User Garage is empty, add now Join Date: Aug 2001 Posts: 2,809	If you have the Bentley manual... ...then you know what it's about and you're probably looking for an extra pair of hands.I'm afraid I can't help there. If you don't have the manual, you should get one. The first step in removing and replacing headlights is "remove the front bumper." One of the first steps in removing the bumper is "loosen the wheel housing." I would NOT recommend doing this without the instructions for reassembling the entire car (i.e., get the manual), as it looks as if there's lots of taking apart and putting back together to do. HPH __________________ __________________________________ Howard Hanson, BocaRaton/EstesPark Sadly, the allroad is gone, and I still miss it.

09-10-2002, 09:12 AM	#5
randy@5280 Member Garage is empty, add now Join Date: Apr 2001 Posts: 3,939	I'll be willing to help... Send me an email and let me know... Randy __________________ 1997 Audi A4 1.8TQ [sold] 2000 Mercedes Benz C230K Sport 2004 Audi A4 Avant 1.8TQ loaded

09-16-2002, 12:06 PM	#6
nuje Junior Member Garage is empty, add now Join Date: Nov 2000 Posts: 741	Does your car already have the 1 piece OEM headlights? Did the euro conversion about a year ago on my '97 which of course meant cutting the fender...a job I slouched off to my dad. We didn't have to do anything fancy like removing the bumper, but it was a bit touchy to slide them in. I personally wasn't too concerned cuz my paint's all messed up. __________________ Mike 2006 A4 2.0TQM

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode