Chin Spoiler for '85 4kq...Where do I get one??

alannarvaez · 09-17-2001, 08:09 AM

I have been looking for a chin spoiler to fit an '85 4kq. I have looked at Blau (they make one, but it's out of stock till god only knows), 2Bennett, TAP & Dynalinx. No one seems to know, but they do exist. This is a pic of Mike Tipton's '86 Coupe showing an obvious "add-on" spoiler. Mike, if you read this- where did you get it? Can anyone else help?

CanyonBlaster · 09-17-2001, 12:07 PM

I made one myself. I answered this ?? a few days back so look at the back log.
If you want, you can email me with your phone # and I'll call you to help.
ps - I used a single red tape stripe at bottom to match car, paint shop guy told me it could easily be painted and hold paint.

jk@bwn.net

good luck

CanyonBlaster · 09-17-2001, 12:10 PM

Here is another view. Neither do it justice, it looks really good, especially for the low cost!

alannarvaez · 09-17-2001, 01:12 PM

Looks good! I have reconciled myself to the fact that I'll have to make one, but when I saw Tipton's Coupe, I though possibly somone out there makes one. I even spent about $60 on carbon fiber and resin supplies, but I can still use a base for the project. I am going to cover my grill with carbon, too. I think it'll look good, especially if I do a chin spoiler out of it, too. Garden plastic, huh? What's the brand name of the stuff? I'll check it out.

cello · 09-19-2001, 07:27 AM

www.audiquattroparts.com

MikTip · 09-20-2001, 12:52 AM

Its an OEM Audi part! I you have a set of the older microfische, the part number can be found there.

I was given the part number years ago, and Carlsen
Audi in Palo Alto CA, found it for me stashed away in one of Audi's National Warehouses.

Story goes it was offered up by Audi as an option, but at first they didnt sell. So Audi removed the parts number from the system. The parts guy at Carlsen had ordered them before and knew which warehouse had them stashed and how many.

Jeffery Goggin has 2 of them. He was selling them
at one point, and for top dollar.

They are very rare item to find. Often immitated.

You might try EuroPart in CA. Walter once had a couple.

The OEM Audi ones often fetch $200+ even used.

alannarvaez · 09-22-2001, 04:46 PM

Damn! Somehow I knew that was going to be the answer. But, I'll give it a try. Thanks for the leads. I was going to try and make one ( I may still have to), but I'd much rather have an OEM. Croos your fingers...

alannarvaez · 09-22-2001, 05:17 PM

I keep calling Blau about every week or so, but they are transfering thier mold from fiberglass to plastic and have been for at leat a year, so I have given up hope.

09-17-2001, 12:07 PM	#2
CanyonBlaster AudiWorld Senior Member Garage is empty, add now Join Date: Nov 2000 Posts: 614	Re: Chin Spoiler for '85 4kq...Where do I get one?? I made one myself. I answered this ?? a few days back so look at the back log. If you want, you can email me with your phone # and I'll call you to help. ps - I used a single red tape stripe at bottom to match car, paint shop guy told me it could easily be painted and hold paint. jk@bwn.net good luck __________________ Gone: '07 RS4 - Misano red/black leather/alu trim/premium pkg. Mods = Stasis MS Susp, GMG Exhst, Unitronic flash. Current: '05 911 GT3 - Full boogey track toy '01 Boxster S - Seal Grey/Blk '08 Cayenne GTS - DD & tow rig I drove the Nurburgring - June '08, three days in a race car, ya gotta go! Canyonblaster

09-17-2001, 12:10 PM	#3
CanyonBlaster AudiWorld Senior Member Garage is empty, add now Join Date: Nov 2000 Posts: 614	Re: Chin Spoiler for '85 4kq...Where do I get one?? Here is another view. Neither do it justice, it looks really good, especially for the low cost! __________________ Gone: '07 RS4 - Misano red/black leather/alu trim/premium pkg. Mods = Stasis MS Susp, GMG Exhst, Unitronic flash. Current: '05 911 GT3 - Full boogey track toy '01 Boxster S - Seal Grey/Blk '08 Cayenne GTS - DD & tow rig I drove the Nurburgring - June '08, three days in a race car, ya gotta go! Canyonblaster

09-17-2001, 01:12 PM	#4
alannarvaez New Member Garage is empty, add now Join Date: Sep 2001 Posts: 66	Re: Chin Spoiler for '85 4kq...Where do I get one?? Looks good! I have reconciled myself to the fact that I'll have to make one, but when I saw Tipton's Coupe, I though possibly somone out there makes one. I even spent about $60 on carbon fiber and resin supplies, but I can still use a base for the project. I am going to cover my grill with carbon, too. I think it'll look good, especially if I do a chin spoiler out of it, too. Garden plastic, huh? What's the brand name of the stuff? I'll check it out.

09-19-2001, 07:27 AM	#5
cello New Member Garage is empty, add now Join Date: Jul 2001 Posts: 98	Try Blau www.audiquattroparts.com

09-20-2001, 12:52 AM	#6
MikTip AudiWorld Expert Garage is empty, add now Join Date: Jun 2000 Posts: 29,354	Re: Zee Chin Spoiler! Its an OEM Audi part! I you have a set of the older microfische, the part number can be found there. I was given the part number years ago, and Carlsen Audi in Palo Alto CA, found it for me stashed away in one of Audi's National Warehouses. Story goes it was offered up by Audi as an option, but at first they didnt sell. So Audi removed the parts number from the system. The parts guy at Carlsen had ordered them before and knew which warehouse had them stashed and how many. Jeffery Goggin has 2 of them. He was selling them at one point, and for top dollar. They are very rare item to find. Often immitated. You might try EuroPart in CA. Walter once had a couple. The OEM Audi ones often fetch $200+ even used. __________________ 2004 A4 1.8t USP Quattro 6MT K04-15/APR/TT 225 Injectors/Custom Stainless Exhaust/710N/RaceTec FMIC 034 HFC/Jet-Hot Cermi-coated & ported exhaust manifold Spec Stage 3+ with OE DMFW! Neuspeed TIP/Neuspeed Snub/Optima 75-35/AFE Pro-Dry/FSI Coils AMS Short-shift @ %40 redux(Sweet!) ST Coils/ H-Sport Anti-Sway bars/E-codes 19x8.5 OEM Audi Skinny Fives with 235-35 Bridgestone 760 Sport Skins B7 A4 brakes with StopTech Ceramic pads and Stop Tech rotors Sirius Satellite Radio Ross-Tech HEX-USB+CAN Equipped Escort 9500ix

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

09-22-2001, 04:46 PM	#7
alannarvaez New Member Garage is empty, add now Join Date: Sep 2001 Posts: 66	Re: Zee Chin Spoiler! Damn! Somehow I knew that was going to be the answer. But, I'll give it a try. Thanks for the leads. I was going to try and make one ( I may still have to), but I'd much rather have an OEM. Croos your fingers...

09-22-2001, 05:17 PM	#8
alannarvaez New Member Garage is empty, add now Join Date: Sep 2001 Posts: 66	Re: Try Blau I keep calling Blau about every week or so, but they are transfering thier mold from fiberglass to plastic and have been for at leat a year, so I have given up hope.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode