Who here has a spare "working" ISV??? I think mine is what is causing the terrible stumbling...

S6 4RiNGS · 09-22-2005, 05:36 PM

only cause before i put on my new POS's which i wanted to buy anyways, mind you, i took the ISV off cleaned it out with carb cleaner, and greased her back up wth WD-40! When i took it out the cylinder inside moved without a problem, but after the lube it moved smoother of course. put it back in and the car ran without a hiccup except once, so then i proceeded to put the 2 new POS's on. The car for the 20 minute drive of stop and go traffic drove extremely smooth and flawlessly! but i want to see with another ISV if my car changes its behavior? the cylinder inside is all marred and one edge is all jagged and not smooth. Which leads me to believe it gets hung up until i it a bump and jars itself loose. So instead of me buying another one, can someone send me one to borrow for a week to diagnose?

A pic of what it looked like after i cleaned it!
EDIT: The inside looked like this before i even touched it! i did nothing to cause the marks or dents!

AndreNY · 09-22-2005, 06:30 PM

S6 4RiNGS · 09-22-2005, 06:53 PM

|skolnick · 09-22-2005, 11:14 PM

VR_Life · 09-23-2005, 07:42 AM

Maybe I ust didn't read it carefully enough

Bill the Cat · 09-23-2005, 05:27 PM

|skolnick · 09-23-2005, 05:30 PM

Bill the Cat · 09-23-2005, 05:50 PM

|skolnick · 09-23-2005, 05:58 PM

09-22-2005, 06:30 PM	#2
AndreNY AudiWorld Senior Member Garage is empty, add now Join Date: Jan 2004 Posts: 864	the good thing is you can use the VR6 one so im sure it's very easy to find a used one for cheap __________________

09-22-2005, 06:53 PM	#3
S6 4RiNGS Member Garage is empty, add now Join Date: Aug 2001 Posts: 5,202	the part is hte exact same? __________________ 07 Lexus IS350 Tungsten Pearl/Black + NAV + Mark Levinson 95 Audi S6 w/Lots of Mods

09-22-2005, 11:14 PM	#4
\|skolnick AudiWorld Super User Garage is empty, add now Join Date: Jan 2004 Posts: 23,770	the 4 cylinder 90 is the same ISV __________________ 1990 Audi Coupe Quattro - Tornado Red 1990 Audi Coupe Quattro - Black 1992 Audi S4 - Cyclamen Pearl Effect 2008 DR-Z400SM - Black

09-23-2005, 07:42 AM	#5
VR_Life Guest Garage is empty, add now Join Date: Jul 2003 Posts: 9,717	Why do you need a replacement ? Sounds like it's working perfectly after cleaning Maybe I ust didn't read it carefully enough

09-23-2005, 05:27 PM	#6
Bill the Cat AudiWorld Super User Garage is empty, add now Join Date: Aug 2003 Posts: 2,333	As is the 5 cyl 80Q __________________ Wenn Sie mit den grossen Hunden laufen werden, **** nicht wie ein Welpe. His 'N Hers - A Happy Garage I'm in Wikipedia! http://en.wikipedia.org/wiki/Bill_the_cat

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

09-23-2005, 05:30 PM	#7
\|skolnick AudiWorld Super User Garage is empty, add now Join Date: Jan 2004 Posts: 23,770	or 90q non-20v (some actually have the Bosch and some have a Hitachi) __________________ 1990 Audi Coupe Quattro - Tornado Red 1990 Audi Coupe Quattro - Black 1992 Audi S4 - Cyclamen Pearl Effect 2008 DR-Z400SM - Black

09-23-2005, 05:50 PM	#8
Bill the Cat AudiWorld Super User Garage is empty, add now Join Date: Aug 2003 Posts: 2,333	Or a Passat to 1997 (V6 or 16V) Even a VR6 Jetta to 96! __________________ Wenn Sie mit den grossen Hunden laufen werden, **** nicht wie ein Welpe. His 'N Hers - A Happy Garage I'm in Wikipedia! http://en.wikipedia.org/wiki/Bill_the_cat

09-23-2005, 05:58 PM	#9
\|skolnick AudiWorld Super User Garage is empty, add now Join Date: Jan 2004 Posts: 23,770	The ISV in my 90 is from a Passat __________________ 1990 Audi Coupe Quattro - Tornado Red 1990 Audi Coupe Quattro - Black 1992 Audi S4 - Cyclamen Pearl Effect 2008 DR-Z400SM - Black

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode