Would 18 x 8 wheels with a 47mm ET need spacers to fill out the wheel wells a little better? Could..

		AudiWorld Forums » Audi Models » Audi A3 / S3 / RS3
Would 18 x 8 wheels with a 47mm ET need spacers to fill out the wheel wells a little better? Could..

Register

Forgot Password?

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

Notices

NEW FEATURE at AudiWorld!!! We now have a fully integrated Wiki!! Check it out!

For full post editing rights, please reply to this thread. Thanks!

For tips on using the forums please visit the following page: Forum Tips Be sure to check out Threaded View!!!

facebook users, please become a fan of AudiWorld's page

We've gotten complaints about spam/virus Private Messages. Any such messages are completely bogus, and should be ignored completely. Read more here.

Audi A3 / S3 / RS3 Discussion forum for the 8L and 8P Audi A3 S3 and RS3
Sponsored by: Audi Online Parts

Discussion Forums:

03-13-2008, 02:28 PM

BAEL

New Member

Join Date: Nov 2005

Posts: 295

Would 18 x 8 wheels with a 47mm ET need spacers to fill out the wheel wells a little better? Could..

the A3 S-Line get away with a 42 offset or would that rub without removing or rolling anything?

03-13-2008, 04:55 PM	#2
munkyboi AudiWorld Member Garage is empty, add now Join Date: Nov 2005 Posts: 420	you might be able to get away with et42 if you don't lower the car... __________________ Be water my friend...

03-13-2008, 05:05 PM	#3
BAEL New Member Garage is empty, add now Join Date: Nov 2005 Posts: 295	What about spacers with a 47ET? Needed to fill out the fenders?

03-18-2008, 05:12 PM	#4
A3gotBAK Audiworld Junior Member 2012 Audi Q5 Join Date: Feb 2007 Location: Anaheim, CA/ Vancouver BC Posts: 71	5mm is okay for the rear to give you the flushed look, Front.... not sure. 18 X 8 ET.47 can use 5mm spacer for the rear. for the Front wise ET.47 should sits pretty flushed along the fender wells, unless you more. __________________ 2012 Audi Q5,P+, Monsoon Grey, RS Grill/Chrome, RS Fog light cover none/S-line, all weather mats, visor tint, Trunk Scuff plate, Hartmann "peeler" 20X9, KW V2 1.5" all around, Ultra Racing(front Struts, front lower brace, transmission brace, rear sway bar, rear torsion brace) New wheel pending (Vagcom mods: needle sweep, comfort window, winker delete, video in-motion, amber delete) (SOLD)07' Audi A3 2.0 S-line, Open-sky, 6MT, Nokya H11 Fogs and headlights, IQUA Snake 2, 18" wheel Achtuning T9 w Falken Z512 w 5mm spacer in rear, Koni Sport, Audi Sport, KOB.

03-18-2008, 05:12 PM
AudiWorld Audi R8 Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On

Discussion Forums: