Valeno

Hello all, i have a 1990 Audi 200 10vt that i recently acquired. After only driving the car about 1k miles a bearing in the turbo seized up (i think) casing damage to the turbine and housing. I am pretty sure it can be rebuilt but i am pressed for time and want to see if a stock or aftermarket turbo will suffice. The car has a chipped ecu and a s2 turbo (k24 0760 on the tag) pushing about 1.8-1.9 BAR of boost. Any suggestions as to what i should get?
http://forums.quattroworld.com/s4s6/msgs/167768.phtml I believe the turbo i have is on the left if that helps in some small way.

yodasfro

A picture of the turbo on your car would help. The turbo you referenced is an RS2 turbo much bigger than the stock k24.