SlutMonkey

Anyone know of a dependable shop in Austin other than Roger Beasley. They're ridiculously overbooked....all the time.

Matt Devo

or if it's something fairly simple, I may be able to help you out. I have a garage, tools, and VAG-COM.

SlutMonkey

I appreciate the offer. I'll check into nwimports and see what their scheduling is like. Basically, I need to change the oil and my blinkers are on the fritz. I did a search on the forums and it seems like a common problem for the blinkers to stop working. My hazards still work. Do you know if nwimports will change out my diverter valve. I want to get it replaced and don't want to drive all the way to san anotonio. Thanks for the help.

s6sputnik

TRY TO SPRAY SOME WD-40 into the contact to clean it.

HTH,

s6sputnik

I'm 100% with Matt on NWImports!

Dave and the gang are great!

I was there today!

fusilier

Wd-40 is more like an oil penetrator and lubricant.
If its an electrical connection. Try some contact cleaner on it. There are some marine contact cleaners which also protect.

Shiggs (WW)

If you have to get a new combi switch, just do the repair yourself. It will take you 10 mins. tops with a non-tip wheel and cost much less.