hyboost

Brand new OEM Off Road Package fender flares. I picked them up to experiment with the idea of painting them to color match the car, similar to the pictures attached. But the wheels/tires I ended up going with will require a much more aggressive setup so looking to pass on some savings to anyone interested in picking them up.

Flares Part Number: 8R00716811QP
Mounting Tape Part Number: 8R0067545A

Flares go for around $1000 from Audi and the tape was another $100. Looking for $800 shipped in the continental US.





Email me if interested

Rob
robek11@hotmail.com

hyboost

Price drop. $700 shipped in the US. Its about a $400 savings from Audi.

hyboost

Dropping to $600 shipped. Almost half price.
There is an off road front bumper on ebay (not my ad) for just under $300 so for less than $1000 total, you can do the whole conversion.

hyboost

Just listed it on ebay for $400 bid with no reserve. Anyone?

gscm75

do you have a picture of the flares

thanks

SQive

Dude...I saw a thread somewhere, where they guy is looking for these exact flares. He specifically wanted these type of smaller flares. I'll see if I can locate it and put you two in contact.

hyboost

Gscm75, I will take some pics of the 1 or 2 I unwrapped but the rest are still sealed
In all the original wrapping.

SQive, I appreciate you looking out for me. Let me know if you find it.

All Italian

What is the tape for?
Any details on the install? How difficult?

Thanks

hyboost

Here is a link to the Audi PDF showing details for installing the entire Off Road package. Ignore the first few pages and jump to page 23 where it shows the fender flare install.

http://www.hyboost.com/images/sq5/of...ad_install.pdf

You will see that the fender extensions hook down under the factory fenders and are attached to the body using the tape. So very straight forward to just install the flares.

But the front bumper and rear bumper fitment will depend on what bumpers you have. If you have a non-SLine bumper, the flares should end nicely at the cutoff line of your OEM bumper. If you have SLine or SQ5 bumpers, you may need to do some trimming depending on how rounded you want the ends to look. My goal was to trim a rounded edge and just paint to match the car.

Another option is to do the offroad bumper. There is one still on ebay pretty cheap
http://www.ebay.com/itm/Audi-Q5-pre-facelift-Off-Road-Package-Bumper-Grille-/261526871427?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AQ5&hash=item3ce4375d83&vxp=mtr
I ended up with Caractere flares which needed similar modifications to the front. I had the body shop trim the front corner slightly to match the curved line of the fog light grill opening. My goal was to do the same with the OffRoad flares, but I was forced to go with Caractere for added wheel clearance since a 10.5" wheel with 295 tire would not have fit under the OffRoad fenders. Caractere fitment was close to perfect, but needed some work. I wish OEM would have worked for me since nothing beats OEM fitment