changing out output shaft seal... what gear oil?
#11
Going to replace with new flange and seal
Silver:
From your prior posts I'm certain about the flange, seal, and gear oil part numbers:
ZF flange 01V 409 809 A
OEM seal ( 018 409 399 A )
1L 75w-90 GL-4 gear oil
Having trouble with part numbers for:
◾(6) Output flange to drive shaft bolts (or you can reuse if you'd like, I replaced mine)
◾(4) 8 x 40 mm high grade bolts
◾(4) 8 mm high grade nuts
◾(8) 8 mm washers
not sure if this is right 6 bolts flange 01F409359 ?
coming up with nothing on the exhaust bolts?
thanks,
From your prior posts I'm certain about the flange, seal, and gear oil part numbers:
ZF flange 01V 409 809 A
OEM seal ( 018 409 399 A )
1L 75w-90 GL-4 gear oil
Having trouble with part numbers for:
◾(6) Output flange to drive shaft bolts (or you can reuse if you'd like, I replaced mine)
◾(4) 8 x 40 mm high grade bolts
◾(4) 8 mm high grade nuts
◾(8) 8 mm washers
not sure if this is right 6 bolts flange 01F409359 ?
coming up with nothing on the exhaust bolts?
thanks,
#12
AudiWorld Super User
Silver:
From your prior posts I'm certain about the flange, seal, and gear oil part numbers:
ZF flange 01V 409 809 A
OEM seal ( 018 409 399 A )
1L 75w-90 GL-4 gear oil
Having trouble with part numbers for:
◾(6) Output flange to drive shaft bolts (or you can reuse if you'd like, I replaced mine)
◾(4) 8 x 40 mm high grade bolts
◾(4) 8 mm high grade nuts
◾(8) 8 mm washers
not sure if this is right 6 bolts flange 01F409359 ?
coming up with nothing on the exhaust bolts?
thanks,
From your prior posts I'm certain about the flange, seal, and gear oil part numbers:
ZF flange 01V 409 809 A
OEM seal ( 018 409 399 A )
1L 75w-90 GL-4 gear oil
Having trouble with part numbers for:
◾(6) Output flange to drive shaft bolts (or you can reuse if you'd like, I replaced mine)
◾(4) 8 x 40 mm high grade bolts
◾(4) 8 mm high grade nuts
◾(8) 8 mm washers
not sure if this is right 6 bolts flange 01F409359 ?
coming up with nothing on the exhaust bolts?
thanks,
01V 409 809 A is the new type flange with the groove...the only kind they sell now, unless they have old stock without the "A". It was made for the new type seal( 01V 409 399A ) with the extra lip to form the dust labyrinth. 018 is the old type seal, but will work..it's identical, except lacks the added dust lip.
See if these ETKA pages help with other parts >>>
Last edited by silverd2; 04-13-2014 at 05:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SSLEDGE1234
A4 (B6 Platform) Discussion
1
02-21-2003 05:05 PM