Suspension Level Control
#1
Audiworld Junior Member
Thread Starter
Join Date: May 2010
Location: UK
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Suspension Level Control
Hi, I have read the guide here http://www.ross-tech.com/vag-com/cars/levelcontrol.html
My question is, once lowered, will I still have the option of setting a higher ride through MMI (i.e. Comfort, or Off Road) when needed.
If so, will these ride hight settings be the original settings, or will they be lowered by the amount I set in VCDS.
Any advice appreciated!
Thanks.
My question is, once lowered, will I still have the option of setting a higher ride through MMI (i.e. Comfort, or Off Road) when needed.
If so, will these ride hight settings be the original settings, or will they be lowered by the amount I set in VCDS.
Any advice appreciated!
Thanks.
#2
All those settings will be lowered by the same amount.
-Uwe-
-Uwe-
__________________
http://www.Ross-Tech.com
http://www.Ross-Tech.com
#3
The height of each wheel is measured between the center of the wheel (the space in between the V and the W) and the lower edge of the fender. All measurements have to be done in Millimeters (mm).
Thread
Thread Starter
Forum
Replies
Last Post
volvopentaman
A8 / S8 (D3 Platform) Discussion
8
05-06-2015 11:42 AM
haudiall
Audi allroad
5
09-09-2002 10:04 AM