Rear View Camera Turn Off Speed
#1
Rear View Camera Turn Off Speed
Has anyone used VCDS to change the turn-off speed of the rear-view camera? Once the Q5 is put in Drive after reverse, the camera stays on until the speed reaches 6+ mph. I'd like it to turn off when placed in Drive or at least sooner than 6 mph. I found in a forum the following information, however modual-(10) park/steer does not exist in my 2013 Q5.
"If you want to make the rear view camera instantly go off upon a gear shift to drive here is the vag-com coding. This will make the rear view camera instantly turn off as well as bring up a car and sensor graphic:
10 - Park/Steer Assist
16 security access ---> 71679
Do it!
7-coding
Byte 0
Bit 4 change 0 to 1"
and this one
"If you only want to change the turn-off speed of the rear-view camera, you can always use this:
Audi parking system - Switch OFF Speed in MMI:
10 - Park/Steer Assist
Adaptation - 10 --> Channel 23
change 10 to (5 through 20 kmh) 5kmh = 3 mph"
Also, has anyone ever contacted VAG-COM for assistance with modifications/problems?
"If you want to make the rear view camera instantly go off upon a gear shift to drive here is the vag-com coding. This will make the rear view camera instantly turn off as well as bring up a car and sensor graphic:
10 - Park/Steer Assist
16 security access ---> 71679
Do it!
7-coding
Byte 0
Bit 4 change 0 to 1"
and this one
"If you only want to change the turn-off speed of the rear-view camera, you can always use this:
Audi parking system - Switch OFF Speed in MMI:
10 - Park/Steer Assist
Adaptation - 10 --> Channel 23
change 10 to (5 through 20 kmh) 5kmh = 3 mph"
Also, has anyone ever contacted VAG-COM for assistance with modifications/problems?
#2
AudiWorld Super User
Has anyone used VCDS to change the turn-off speed of the rear-view camera? Once the Q5 is put in Drive after reverse, the camera stays on until the speed reaches 6+ mph. I'd like it to turn off when placed in Drive or at least sooner than 6 mph. I found in a forum the following information, however modual-(10) park/steer does not exist in my 2013 Q5.
"If you want to make the rear view camera instantly go off upon a gear shift to drive here is the vag-com coding. This will make the rear view camera instantly turn off as well as bring up a car and sensor graphic:
10 - Park/Steer Assist
16 security access ---> 71679
Do it!
7-coding
Byte 0
Bit 4 change 0 to 1"
and this one
"If you only want to change the turn-off speed of the rear-view camera, you can always use this:
Audi parking system - Switch OFF Speed in MMI:
10 - Park/Steer Assist
Adaptation - 10 --> Channel 23
change 10 to (5 through 20 kmh) 5kmh = 3 mph"
Also, has anyone ever contacted VAG-COM for assistance with modifications/problems?
"If you want to make the rear view camera instantly go off upon a gear shift to drive here is the vag-com coding. This will make the rear view camera instantly turn off as well as bring up a car and sensor graphic:
10 - Park/Steer Assist
16 security access ---> 71679
Do it!
7-coding
Byte 0
Bit 4 change 0 to 1"
and this one
"If you only want to change the turn-off speed of the rear-view camera, you can always use this:
Audi parking system - Switch OFF Speed in MMI:
10 - Park/Steer Assist
Adaptation - 10 --> Channel 23
change 10 to (5 through 20 kmh) 5kmh = 3 mph"
Also, has anyone ever contacted VAG-COM for assistance with modifications/problems?
Select 10 - Park/Steer Assist
[Adaptation - 10]
Channel 23 (channel 233 with facelift) adjusting the value as desired. Maximum value of 20 (Equivalent value km / h)
VAG-COM???? It does not exist for a long time
Maybe you think the Ross-Tech
For SQ5 the parking aid control unit is integrated in the vehicle electrical system. Channel not yet known to adapt
Last edited by spijun; 11-09-2013 at 02:24 PM.
#3
Try this:
Select 10 - Park/Steer Assist
[Adaptation - 10]
Channel 23 (channel 233 with facelift) adjusting the value as desired. Maximum value of 20 (Equivalent value km / h)
VAG-COM???? It does not exist for a long time
Maybe you think the Ross-Tech
For SQ5 the parking aid control unit is integrated in the vehicle electrical system. Channel not yet known to adapt
Select 10 - Park/Steer Assist
[Adaptation - 10]
Channel 23 (channel 233 with facelift) adjusting the value as desired. Maximum value of 20 (Equivalent value km / h)
VAG-COM???? It does not exist for a long time
Maybe you think the Ross-Tech
For SQ5 the parking aid control unit is integrated in the vehicle electrical system. Channel not yet known to adapt
Thanks though...
Thread
Thread Starter
Forum
Replies
Last Post
tunes
S4 (B8 Platform) Discussion
6
07-09-2011 05:30 AM
Tom (90Carat)
Audi Original "S" Cars
6
11-27-2007 12:52 PM