Nothing going on over here with Ernesto coming over the east so here's the new mod Dahlback Air
#1
Former Vendor
Thread Starter
Join Date: Mar 2000
Location: Northern NJ
Posts: 6,357
Likes: 0
Received 0 Likes
on
0 Posts
Nothing going on over here with Ernesto coming over the east so here's the new mod Dahlback Air
intake.....the throttle response feels much nicer, don't hear much but I haven't really pushed the car since the install, not sure what its good for maybe 5-15 hp, looks incredibly aggressive. Bought it from Dahlback NA, (Danny) and installed by KMD Tuning in Westwood, NJ (Dion)
of course this thread would not mean much without the pics so here they are....
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0051-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0050-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0049-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0045-2.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0044-1.jpg">
of course this thread would not mean much without the pics so here they are....
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0051-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0050-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0049-1.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0045-2.jpg">
<img src="http://i46.photobucket.com/albums/f149/pyiu/IMG_0044-1.jpg">
#4
Former Vendor
Thread Starter
Join Date: Mar 2000
Location: Northern NJ
Posts: 6,357
Likes: 0
Received 0 Likes
on
0 Posts
I can't hear the dv's blow off. With the exhuast and the car being so well insulated I can't hear
much of anything coming from the front...you can hear the turbo whine though.
Trending Topics
#8
they look sweet!! do you think heat shields would make it perform better?
just from looking at the setup, you might be dropping some HP due to the hot air being sucked in from the engine bay. just my 2 cents...
#9
Former Vendor
Thread Starter
Join Date: Mar 2000
Location: Northern NJ
Posts: 6,357
Likes: 0
Received 0 Likes
on
0 Posts
Possilbly...but I'll take my chances and see what happens, if it doesn't work or there is heat soak
I will just swap it back out. But for now it will stay in. Thanks for the heads up guys.
#10
Hot air intake conversion? I don't see how this can help...
Those air filters will be sucking hot air right off the motor, no?
Maybe I'm not 'getting' the picture from the picture, but it sure looks like a recipe for a hot air intake path...
How does it help?
Maybe I'm not 'getting' the picture from the picture, but it sure looks like a recipe for a hot air intake path...
How does it help?