VMR wheels

SilverFour · 05-04-2012, 11:15 AM

A friend of mine has an S6 and is trying to sell me a set of wheels that he bought but didn't fit his car. The wheels didn't fit around his RS6 breaks so he's offering them to me for 700 for a set of 5 brand new VMR wheels. Had anyone had any experience with these wheels before or know anything about them?

malinowskiski · 05-04-2012, 03:44 PM

I haven't but I would recommend you take a measuring tape/stick and ensure that 1" out from the VMR's hub there is at least 2" of clearance before you hit the spokes. Unless you have spacers. The front calipers on our S4 protrudes about 2" past the hub. I got a good deal on some wheels, brought them home and they didn't clear the calipers. =(

papuc (MMI S4) · 05-07-2012, 02:11 PM

Depending on the ET the wheels might fit. I was running VMRs for a while and loved them. Best way to see if they fit is to... try them on the car.

Mr Kram · 05-07-2012, 02:23 PM

What size and offset? VMR claims that their wheels are BBK compatible. The 19's I'm getting will clear a stoptech 380mm set up.

05-07-2012, 02:11 PM	#3
papuc (MMI S4) AudiWorld Senior Member Garage is empty, add now Join Date: Nov 2007 Posts: 853	Depending on the ET the wheels might fit. I was running VMRs for a while and loved them. Best way to see if they fit is to... try them on the car. __________________ 2001 Audi S4 6MT GIAC-X Bosch 710n Bilstein Shocks w/ H&R Springs AWE Vent Gauge V1 Hardwired w/ ToyGuy concealed display Greddy Turbo Timer Stage 1 Custom 3" Milltek exhaust on the work bench. Piggies, whenever I get to it. Maintenance needed: Timing Belt. In 2K miles and counting. Oxygen Sensors.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-04-2012, 03:44 PM	#2
malinowskiski Audiworld Junior Member Garage is empty, add now Join Date: Dec 2010 Location: Seattle,WA Posts: 25	I haven't but I would recommend you take a measuring tape/stick and ensure that 1" out from the VMR's hub there is at least 2" of clearance before you hit the spokes. Unless you have spacers. The front calipers on our S4 protrudes about 2" past the hub. I got a good deal on some wheels, brought them home and they didn't clear the calipers. =(

05-07-2012, 02:23 PM	#4
Mr Kram AudiWorld Member Garage is empty, add now Join Date: Mar 2006 Posts: 141	What size and offset? VMR claims that their wheels are BBK compatible. The 19's I'm getting will clear a stoptech 380mm set up.