Merry X-Mas and Happy Holidays to all 1200+ of the luckiest car owners in the world!
#1
AudiWorld Super User
Thread Starter
Join Date: Jan 2003
Posts: 2,300
Likes: 0
Received 0 Likes
on
0 Posts
Merry X-Mas and Happy Holidays to all 1200+ of the luckiest car owners in the world!
May your Beasts continue to bless your lives and keep you safe in you and your families travels..
#7
Yup, but it borke it's T belt.
Meaning the sodium filled valves broke open, leaking the sodium material on the pistons and clyinder walls, then combined with the moisture in the atmoshpere, etching the cylinder walls and pistons.
Then just tore the motor down and the 2 "bent" rods bent only the tinest bit, but enough to be garbage. So a good rod has been sent out to Pauter Machine in Califonia to be X-rayed to confirm it is straigh, then replicate in forged, lightweight form, which will make, possibly, the first built RS6 motor, ever? If all that dosen't work out, then they just got another RS6, normal, plain sedan, only a light front end collision, buthte motor is OK. They plan to keep it straight, and repair it, but if the Pauiter rods do not work out, they have to break apart the sedan.
Then just tore the motor down and the 2 "bent" rods bent only the tinest bit, but enough to be garbage. So a good rod has been sent out to Pauter Machine in Califonia to be X-rayed to confirm it is straigh, then replicate in forged, lightweight form, which will make, possibly, the first built RS6 motor, ever? If all that dosen't work out, then they just got another RS6, normal, plain sedan, only a light front end collision, buthte motor is OK. They plan to keep it straight, and repair it, but if the Pauiter rods do not work out, they have to break apart the sedan.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
cletus141
RS 6 Discussion (C5)
6
04-05-2009 06:54 PM
Only-Emre
RS 6 Discussion (C5)
5
02-10-2006 09:59 PM
AndrewsQuattros
A6 / S6 (C5 Platform) Discussion
13
12-09-2002 01:46 PM
no.radar
A6 / S6 (C5 Platform) Discussion
11
06-06-2002 12:47 PM