Still "Can't Find Controller"
02-09-2006, 06:36 PM
#1
New Member
Thread Starter
Join Date: Sep 2004
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Still "Can't Find Controller"
It's not an error anymore with the Third Party software, but still says can't find controller for the Airbag.
I contacted my distributor, he said try changing the baud rate? i don't really know what that means
I contacted my distributor, he said try changing the baud rate? i don't really know what that means
02-09-2006, 09:09 PM
#2
AudiWorld Senior Member
Join Date: Jun 2004
Location: Magdeburg, Germany
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go... But there are NO known baudrate issues with airbag control modules.
<ul><li><a href="http://www.ross-tech.com/vag-com/tour/option_screen.html">http://www.ross-tech.com/vag-com/tour/option_screen.html</a</li></ul>
02-10-2006, 06:30 AM
#3
New Member
Thread Starter
Join Date: Sep 2004
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Re: Here ya go... But there are NO known baudrate issues with airbag control modules.
Would it be a good idea to look at changing the KW2 Delay, TST Address or CAN Timeout? After reading it looks like one of those could be the problem, but I don't know too much about this stuff. What else could be stopping it from finding the Airbag controller? Thanks for the help by the way
02-10-2006, 07:39 AM
#4
AudiWorld Senior Member
Join Date: Jun 2004
Location: Magdeburg, Germany
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
No, but you may start with telling us which car you talk about.
You also said "it's not a 3rd party hardware error anymore, how do you know? Did you double check with "real" hardware?! 
02-10-2006, 08:14 AM
#5
New Member
Thread Starter
Join Date: Sep 2004
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Re: No, but you may start with telling us which car you talk about.
It's a 01 A4 1.8, with 409.1 software there would be an error message when i tried to scan the airbags, now after i was told to try 311.2 it's not an error message when i scan the airbags. it says 'can't find controller try again' where it would want me to shut the car off because of the error with 409.1.
during the auto-scan it goes through all of the other controllers just fine, why would it be having trouble only with the airbags, of course the one code i need to clear?
during the auto-scan it goes through all of the other controllers just fine, why would it be having trouble only with the airbags, of course the one code i need to clear?
Thread
Thread Starter
Forum
Replies
Last Post
buellfire
Rocky Mountain Discussion
0
02-28-2008 03:29 PM
myfirstimport
Audio, Video and Security Discussion
1
05-19-2006 09:14 AM
Cargasm2.7
Chicago Discussion
2
03-13-2006 06:45 AM