MIL on, 1113 code says fuel air metering?
04-15-2007, 08:32 AM
#1
Audiworld Junior Member
Thread Starter
Join Date: Mar 2007
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
MIL on, 1113 code says fuel air metering?
<center><img src="http://pictureposter.audiworld.com/121972/dscn0942.jpg"></center><p>Anyone have any ideas on what this could mean?
how should i go about troubleshooting this?
how should i go about troubleshooting this?
04-15-2007, 01:33 PM
#3
Looked it up for a B5 S4, it says.....
P1113
17521
Bank 1 Sensor 1
Internal Resistance too High 2)
- Check oxygen sensor heater
.....Which doesn't correspond to what you're saying. Further, a P1113 code is going to be generic, I.E. pretty much meaning the same thing for any OBD2 car. The acception to this (being my own devil's advocate) would be related to the differences between an early (bosch) S4 vs a later (hitachi)S4. Maybe....
P0113 is in regards to the AIT....but IMO you may have a problem with your MAF sensor.
17521
Bank 1 Sensor 1
Internal Resistance too High 2)
- Check oxygen sensor heater
.....Which doesn't correspond to what you're saying. Further, a P1113 code is going to be generic, I.E. pretty much meaning the same thing for any OBD2 car. The acception to this (being my own devil's advocate) would be related to the differences between an early (bosch) S4 vs a later (hitachi)S4. Maybe....
P0113 is in regards to the AIT....but IMO you may have a problem with your MAF sensor.
Thread
Thread Starter
Forum
Replies
Last Post
Cmmartin23
Parts For Sale - Archive (NO NEW POSTS HERE)
26
08-23-2016 04:44 PM
saifxnyc
A6 / S6 (C6 Platform) Discussion
9
11-30-2015 12:32 PM
FedericoDC
2.0T FSI Discussion
0
09-05-2015 11:45 AM
