J valve for 99.5...
#3
AudiWorld Senior Member
Thread Starter
Join Date: Jul 2001
Location: Vancouver, Canada
Posts: 1,394
Likes: 0
Received 0 Likes
on
0 Posts
thx for your info. can u help me on current issue of my car as well,..
i notice u been in an audi community for a long time. So last wed, my car had a very rough idle, u can smell the fuel, no power, blinking cel so i assume this is coilpack failure.
so today i finally check with vag, the codes are as follow:
1)
16884 Random/mulitple cylinder misfire detected
P0300-35-10 --- intermittent
2)
16686 Shareware version. To decode all DTCs
P0302-35-10 --- please register/activate
3)
16684 Shareware version. To decode all DTCs
P0300-35-00 --- please register/activate
4)
16686 Shareware version. To decode all DTCs
P0302-35-00 --- please register/activate
so here are the 4 fault codes, do i have a coilpack failure case here? if yes, which cylinder is it?
also, wat are 2,3 and 4??
plz help me out, thx in advance.
so today i finally check with vag, the codes are as follow:
1)
16884 Random/mulitple cylinder misfire detected
P0300-35-10 --- intermittent
2)
16686 Shareware version. To decode all DTCs
P0302-35-10 --- please register/activate
3)
16684 Shareware version. To decode all DTCs
P0300-35-00 --- please register/activate
4)
16686 Shareware version. To decode all DTCs
P0302-35-00 --- please register/activate
so here are the 4 fault codes, do i have a coilpack failure case here? if yes, which cylinder is it?
also, wat are 2,3 and 4??
plz help me out, thx in advance.
#4
I have the J
And I like it. Try it out, see if you like it, thats the best way to know. Its not very expensive or hard to put in. Sometimes you will get info that has no meaning at all, I mean iam sure gj is giving you his honest opinion, and iam not knocking him, but he should explain why he feels you should not get it. But in my opinion: I get to boost a little faster, and i hold a little higher boost, like 1 or 2psi, seems worth it in my opinion. Your not seeing all the code because you have not registerd your Vag software. Just do a dsearch on the code you can see, and that will help you out a lot.
Thread
Thread Starter
Forum
Replies
Last Post
fourwheelslide
A4 (B6 Platform) Discussion
9
03-12-2006 02:25 PM
faust92
A4 (B5 Platform) Discussion
6
05-10-2004 09:16 AM