A6 / S6 (C5 Platform) Discussion Discussion forum for the C5 Audi A6 and S6 produced from 1998-2004

Just bought a 2.7t! Had some questions about shop estimates.

Thread Tools
 
Search this Thread
 
Old 08-16-2010, 05:21 PM
  #1  
AudiWorld Newcomer
Thread Starter
 
mstank's Avatar
 
Join Date: Aug 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Just bought a 2.7t! Had some questions about shop estimates.

Hello all! My name is Marko, and I'm now a proud owner of a 2003 2.7t.

I got a great deal on it, $6k! friend of a friend. It has a small oil leak, I brought it in to a local shop and had an estimate done.

They said that the Valve Cover Gasket is leaking a bit. They quoted me $65 per gasket set and $324 for labor, Total $454.00 to have both gaskets changed.

I don't have a lot of mechanical experience but I'm more than willing to learn. Is this something I could manage with some knowledgeable friends and a manual?

Also, the car has 74k mi on it and I believe that the timing belt and water pump haven't been changed yet. The shop quoted me $450 parts and $650 labor. I definitely don't trust myself with this, so is $1100 reasonable? Or could I even do this job myself?

Thanks guys -- looking forward to doing some work on the car!
Old 08-16-2010, 06:19 PM
  #2  
AudiWorld Super User
 
Airbag's Avatar
 
Join Date: Oct 2006
Location: In my Garage
Posts: 2,190
Likes: 0
Received 59 Likes on 58 Posts
Default

Well I am not sure if 6K is a great deal or not but i will let the other 2.7t guys chine in on that ( i payed 1K for my 20000 2.8 )

I have the same leaks and I can get the gaskets for about 21.00 per side, i figure it will take me about half a day to do both sides as i will be doing the tensioner gaskets and cam plugs at the same time. I enjoy doing this stuff so will take my time . BTW the Audi is my only car that leaks more oil than my 911 so i don't think itis a big deal if it leaks,,

i also did my own timing belt. Got a whole kit for about 349 but wish I had gotten a water pump right from Audi a there have been a few horror stories lately. It was challenging as the whole front end of the car has to come off . if a guy will do it for about 1200 i think that is a fair deal and seams to be about average.
Old 08-17-2010, 05:04 AM
  #3  
AudiWorld Super User
 
Just Me's Avatar
 
Join Date: Mar 2003
Posts: 6,001
Likes: 0
Received 0 Likes on 0 Posts
Default

both estimates are reasonable. With help here and a bentley, you could easily do the gaskets yourself. 75 is right on time for the TB and $1100 is a fair quote for a 2.7t, depending on where you live. I paid about that in Metro NYC a few years back.

G
Old 08-17-2010, 06:32 AM
  #4  
AudiWorld Member
 
TheSilverBullet's Avatar
 
Join Date: Jan 2010
Location: DC
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

Agreed that both estimates are fair. I paid about $1400 parts and labor for TB, water pump, and all the related seals.

Also, my water pump did start to leak before I had it replaced. It was very intermittent at first but slowly became more frequent. I also had a minor oil leak but that was resolved by having all the seals replaced.
Old 08-17-2010, 04:09 PM
  #5  
AudiWorld Newcomer
Thread Starter
 
mstank's Avatar
 
Join Date: Aug 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

So, new update. The guy dropped the price of the car $1,000 total for the car is 5k now!

I'm definitely going to have the shop do the timing belt and I hope I can get some money off if I also do the valve cover gaskets and cv boot at the same time.

Hopefully I can get all this done for $1500 or else I'll do the valve cover gaskets myself and ideally not mess up the car while I'm at it.
Old 08-18-2010, 04:46 AM
  #6  
AudiWorld Member
 
Daremo_06's Avatar
 
Join Date: Feb 2010
Location: Rhode Island
Posts: 172
Received 1 Like on 1 Post
Default

After agressively looking for a 2.7t over the past 4-5 weeks, I can tell you that if there are no problems with the car other than needing the timing belt service, 5k for a 2003 2.7t with that low milage is an AMAZING price. If its a 6speed manual, it would be even more amazing, but even with Tip, its a steal at that price. Congrats!

Originally Posted by mstank
So, new update. The guy dropped the price of the car $1,000 total for the car is 5k now!

I'm definitely going to have the shop do the timing belt and I hope I can get some money off if I also do the valve cover gaskets and cv boot at the same time.

Hopefully I can get all this done for $1500 or else I'll do the valve cover gaskets myself and ideally not mess up the car while I'm at it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
divil
A6 / S6 (C5 Platform) Discussion
7
04-01-2013 05:04 AM
Rhoomba
Audi allroad
3
10-24-2008 05:32 PM
Rick2898
A6 / S6 (C5 Platform) Discussion
2
07-31-2007 06:56 PM
LensA4
Canadian Discussion
7
10-07-2005 10:43 AM



Quick Reply: Just bought a 2.7t! Had some questions about shop estimates.



All times are GMT -8. The time now is 02:28 PM.