15 months and God only knows how many hours of my time......
#21
The bearings just fell out of the bushing when I pulled them out.
I noticed you had the now NLA blue mounts in there. I replaced them with greens. I've still got a pop when I turn the wheels left to right so I'm going to replace the ball joints and control arm bushings. I guess I'll need to find some later style control arms and sway bar. Fun mister!
#22
May have something to do with the H&R springs too. Always had little
noises after they were installed. They're pretty short. Have you tried a stethescope to pinpoint the noise or is that possible.
#26
I was going to just replace it all while I was in there.
<center><img src="http://pictureposter.audiworld.com/10045/dsc01334.jpg"></center><p>You know how I am! I'll put all new parts in and if it still does it I'll throw the chassis ear on the thing and try to pinpoint the noise. But, I'm already pretty sure it's the ball joints (NLA).
Here's a better picture for you John. Waddaya think of the euros?
Here's a better picture for you John. Waddaya think of the euros?
#27
I like them. The later 4k's I put in there were ok, but not much light..
I hated the original quads. I'm sure glad it went to a good home. Had a lot to do with me finally letting it go. Hows it doing otherwise? You'all driving it much?
#29
Adding relays helps that dim light problem.
I had the same problem on the Zermatt 4k...then I built a harness and relayed each beam. As Chris can attest, it was borderline criminal how much light I had.
I still need to build on for the '83.
I still need to build on for the '83.
Thread
Thread Starter
Forum
Replies
Last Post
Zane Khan
Auto Detailing Discussion
4
11-24-2015 04:54 PM
the_duke
A8 / S8 (D3 Platform) Discussion
6
09-10-2015 09:02 AM