Phillips2024's Q7 build
#11
AudiWorld Junior Member
Thread Starter
Join Date: Mar 2011
Location: NH
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
new wheels will be going on when the weather gets better. stay tuned!
#12
#14
I have the same lights and I have recieved codes where the white lights on the drivers side wasn't lighting,
I checked the connected and since it's hanging in small open area above the fogs the contacts (gray connector) has started to oxidize causing intermittent connection throwing a code (hate the bulb alert ).
I also noticed that there was water or condensate in the array as well!
Also in NH now....
I checked the connected and since it's hanging in small open area above the fogs the contacts (gray connector) has started to oxidize causing intermittent connection throwing a code (hate the bulb alert ).
I also noticed that there was water or condensate in the array as well!
Also in NH now....
#15
AudiWorld Junior Member
Thread Starter
Join Date: Mar 2011
Location: NH
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
22x10 with a 40 offset. 285/40 tire. Will prob get spacers to poke the wheels out a little more
Edit: 40 offset. Going with 15/23mm spacers.
Last edited by phillips2024; 04-15-2014 at 02:17 PM.
#19
looks really great!, about the LEDS, when you ordered, did you check other options on ebay?. Saw this aution and seems to be almost the same.
http://www.ebay.com/itm/111066220451...84.m1423.l2649
http://www.ebay.com/itm/111066220451...84.m1423.l2649
#20
looks really nice!, one question about the LEDS. Searching on ebay there is some kits for half of the price, did you check that ones?. Seems that a lot of people oredered according ebay sold counter.