Darryl@HPAMotorsport

All VAD software equipped devices have the ability to log multiple Measuring Blocks, even though only one of the logged blocks can be displayed on the screen at one time. In this instance, logged information for the Measuring Blocks not shown is stored in the Memo Pad and can be viewed or synced to a PC after the logging is completed.



With the quick scroll feature, VAD users will be able to toggle between only those Measuring Blocks being logged. In this instance, tapping the arrow next to the block number will advance to the next logged block, not the next consecutively numbered block. In addition, to remind the user that they are in quick scroll mode, the arrows beside the Measuring Block number will shown clear, rather that the normal solid black.



Example:

Blocks to be logged 1,2, 20, and 30.

1. When standard scrolling is enabled, tapping the solid black arrow will scroll through blocks 1,2,3,4,5,6,7,8,9…etc.
2. When quick scrolling is enabled, tapping the clear arrow will scroll through blocks 1,2,20,30,1,2,20,30,1…etc.

The quick scroll feature can be disabled simply by selecting the quick scroll option on the top task bar, just as it was activated.