5th gear boost surge 12psi-15psi

5000turbo · 04-28-2012, 01:24 PM

it holds at 18 1-3 15psi in 4th and then flexs between 12psi and 15psi in 5th, i'm not quite sure what it is... I don't think its a boost leak so idk? any ideas?

88A5TQ · 05-06-2012, 05:17 AM

Hey. I don't know squat about boost controllers but maybe you can set different values for different gears but I doubt it. I would start by checking all vacuum lines to and from the controller and wastegate and the wastegate diaphragm. Also maybe give greddy customer service a call. Another consideration might be that the Ecu is limiting boost somehow through the controller (idk?) because of a rise in intake/coolant temps. Does it behave like this even with the water/meth setup replenished?

Last recommendation: join motorgeek and repost these questions. EFI is the life-force for the majority of vehicles over there.

AudiQ5sleeper · 05-07-2012, 11:37 AM

Vacuum leak most likely. but use a fog machine to find that leak.

5000turbo · 05-12-2012, 08:12 AM

There is a hose that connects from the intercooler piping to the turbo inlet that is kinked.... possible issue/>

05-06-2012, 05:17 AM	#2
88A5TQ Audiworld Junior Member 1988 Audi 5000 Join Date: Sep 2009 Posts: 43	Hey. I don't know squat about boost controllers but maybe you can set different values for different gears but I doubt it. I would start by checking all vacuum lines to and from the controller and wastegate and the wastegate diaphragm. Also maybe give greddy customer service a call. Another consideration might be that the Ecu is limiting boost somehow through the controller (idk?) because of a rise in intake/coolant temps. Does it behave like this even with the water/meth setup replenished? Last recommendation: join motorgeek and repost these questions. EFI is the life-force for the majority of vehicles over there. __________________ 1988 Audi 5000 CS TQ 2.5" cat-back, K&N CAI, TAP, HDI EBC 18 psi, 034 shifter, AEM W/M, black leather/suede interior 1987 5000 tq parts car Last edited by 88A5TQ; 05-06-2012 at 05:42 AM.

05-12-2012, 08:12 AM	#4
5000turbo Audiworld Junior Member Garage is empty, add now Join Date: Apr 2012 Location: Minneapolis Posts: 17	There is a hose that connects from the intercooler piping to the turbo inlet that is kinked.... possible issue/> __________________ P&P K24 Turbo ARP Headstuds 1.9 bar Wastegate Spring 3“ custom down pipe 3" Magnaflow ABT cam Custom Intercooler MSD Ignition Megasquirt Fuel Injection MAC 11C 2.5 bar map Greddy Profect B boost controller (18 psi) Water-Meth Injection Bilstein HD Shocks and H&R Springs Rebuilt Front calipers, Hawks alround,SS Lines V- 8 Master Cyl and rear disc upgrade 93 V-8 Ft sway bar

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-07-2012, 11:37 AM	#3
AudiQ5sleeper AudiWorld Member Garage is empty, add now Join Date: Apr 2012 Posts: 367	Vacuum leak most likely. but use a fog machine to find that leak.