1990 100Q air bag light

dkarten · 05-04-2012, 04:55 AM

my light has been on for some time. I recently bought an A4 & after replacing oil pan (grr!) that air bag light was on, so I purchased a code reset device that had several cables, one fit the A4 & I reset that light, another had the 2 plug early Audi cable that fit my dealer installed recall/update plug, when it connects it says "no i/p control system for airbag" any ideas I'm tired of seeing that airbag light on & would like it to function

yodasfro · 05-04-2012, 07:28 PM

The airbag computer has it's own set of connectors behind the drivers side tunnel cover. http://www.sjmautotechnik.com/troubl...ting/susp.html

dkarten · 05-07-2012, 06:38 AM

the reset device I bought has the 2 wire connectors that fit the 2 wires in the drivers side center console, I used to have a shop that had the proper VAG but they are gone now & indie shops don't seem to have this older style, when I connect the reset device it acknowledges it's connected to the system but gives me an error message

05-04-2012, 07:28 PM	#2
yodasfro AudiWorld Super User Garage is empty, add now Join Date: Mar 2005 Location: CT Posts: 2,392	The airbag computer has it's own set of connectors behind the drivers side tunnel cover. http://www.sjmautotechnik.com/troubl...ting/susp.html __________________ Austin 92 urs4 91 200 20v 90 90q 20v 88 5ktq avant

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-07-2012, 06:38 AM	#3
dkarten AudiWorld Member Garage is empty, add now Join Date: Dec 2006 Posts: 353	the reset device I bought has the 2 wire connectors that fit the 2 wires in the drivers side center console, I used to have a shop that had the proper VAG but they are gone now & indie shops don't seem to have this older style, when I connect the reset device it acknowledges it's connected to the system but gives me an error message