stock dyno graph

sgroer · 05-04-2012, 09:14 AM

Well - here's the stock dyno - 293HP and 322 lbs of torque to the wheels.

dougpaper · 05-04-2012, 10:13 AM

i just had a sneaking suspicion these cars produced more power than advertised. I was stepping from a 2004 A8 i had since new and this A6 felt way quicker. I would bet the thing puts out closer to 360-370 at the crank.

PJRed2008 · 05-04-2012, 10:18 AM

Agree with dougpaper, that is way above advertised, and very nice

Who needs a tune, eh?

day1yun · 05-04-2012, 01:31 PM

dynapack is a hub chasis dyno, meaning the car is dyno'ed with the wheels/tires off. From what I understand it usually gives higher numbers than a traditional roller type dyno.

sgroer · 05-04-2012, 01:38 PM

FYI, these are sae corrected as well.

sgroer · 05-04-2012, 03:39 PM

Quote:

Originally Posted by day1yun

dynapack is a hub chasis dyno, meaning the car is dyno'ed with the wheels/tires off. From what I understand it usually gives higher numbers than a traditional roller type dyno.

It's hard to extract conclusive numbers from one dyno. But I think it's safe to say we are easily at 340 and probably more like 360 given this.

I did run it on a mustang dyno as well and got similar results. 295 hp and 317 torque. I am just trying to get a baseline from a couple of angles to measure my improvements as I go.

tenspeed · 05-04-2012, 07:15 PM

Here's what Audi publishes

RobC · 05-04-2012, 10:44 PM

FWIW, the S4 guys came up with ~360HP crank on a stock car.

05-04-2012, 10:18 AM	#3
PJRed2008 AudiWorld Senior Member Garage is empty, add now Join Date: Aug 2010 Location: Tri-Cities, WA Posts: 605	Agree with dougpaper, that is way above advertised, and very nice Who needs a tune, eh? __________________ 2012 A6 Prestige, Quartz Gray/Black 3.0T Quattro, 18" Sport Package, Side Assist, Full LEDs 2008 A6, Blk/Blk 3.2 Quattro (Sold)

05-04-2012, 10:44 PM	#8
RobC AudiWorld Super User 2013 Audi S6 My Garage Join Date: Mar 2000 Location: Duluth, GA Posts: 2,501	FWIW, the S4 guys came up with ~360HP crank on a stock car. __________________ Robert Cheng 2010 S4, 6-spd, Meteor Gray, Prestige, Sport Diff, Strat shifter, H&R Rear Sway 2013 S6, Estoril Blue, B&O, LED, cold weather, comfort seats, 20", rear shade, BBS CH-R 20x9 ET25

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-04-2012, 10:13 AM	#2
dougpaper AudiWorld Member Garage is empty, add now Join Date: Jan 2005 Location: Pittsburgh Posts: 111	i just had a sneaking suspicion these cars produced more power than advertised. I was stepping from a 2004 A8 i had since new and this A6 felt way quicker. I would bet the thing puts out closer to 360-370 at the crank.

05-04-2012, 01:31 PM	#4
day1yun Audiworld Junior Member 2012 Audi A6 Join Date: Feb 2009 Location: MD Posts: 87	dynapack is a hub chasis dyno, meaning the car is dyno'ed with the wheels/tires off. From what I understand it usually gives higher numbers than a traditional roller type dyno.

05-04-2012, 01:38 PM	#5
sgroer AudiWorld Senior Member Garage is empty, add now Join Date: Apr 2007 Location: Roswell, GA Posts: 681	FYI, these are sae corrected as well.

05-04-2012, 07:15 PM	#7
tenspeed AudiWorld Senior Member Garage is empty, add now Join Date: Dec 2011 Location: Honeoye New York USA Posts: 1,384	Here's what Audi publishes