To those with Symphony II and an iPod adapter

n3985 · 05-04-2012, 09:07 PM

Tried to install my Enfig iPod adapter (Enfig house brand as recommended by their tech folks), everything is good until I tried to slide my headunit back.

http://enfigcarstereo.com/ENFIG_VWT_CIP_AUX.html

I have all the wiring complete, tested, and tucked away in what space is available behind the HVAC and the sides. However the actual box of the iPod adapter is preventing the headunit from clipping back in.

Where did you all tuck this box? Be it the Dice, Dension, USA Spec or etc?

Thanks!

SloopJohnB@mac.com · 05-05-2012, 05:19 AM

I put my DICE adaptor just outside the glovebox, above the glovebox, bolted to the glovebox. Handy because I had to replace the #%% thing once. 02S6

n3985 · 05-06-2012, 02:59 PM

Thanks for the tip.

In case anyone is confused as to where to install an iPod/iPhone adapter in a C5 A6, here are some pics:

First dropped the glovebox:

Taped up the Enfig unit (yours could be Dice, USA Spec, Grom...etc)

The Enfig unit came with a heavy duty albeit overkill 8 gauge iPod cable....about 6 ft long. Had to tuck it away in the glovebox too.

Tuck all the wire connectors in the small cubicle to the right of the headunit.

Re-assemble and end result!

Also Enfig had DIY videos apparently, would have been nice if they mentioned this ahead of time...could save me and many others a lot of time!

http://www.youtube.com/watch?v=-asduq8Dh8A

http://www.youtube.com/watch?v=XFFswo7QxSo

05-06-2012, 02:59 PM	#3
n3985 Audiworld Junior Member 2002 Audi A6 Avant 3.0 Join Date: Nov 2010 Location: Edgewater, NJ Posts: 69	Thanks for the tip. In case anyone is confused as to where to install an iPod/iPhone adapter in a C5 A6, here are some pics: First dropped the glovebox: Taped up the Enfig unit (yours could be Dice, USA Spec, Grom...etc) The Enfig unit came with a heavy duty albeit overkill 8 gauge iPod cable....about 6 ft long. Had to tuck it away in the glovebox too. Tuck all the wire connectors in the small cubicle to the right of the headunit. Re-assemble and end result! Also Enfig had DIY videos apparently, would have been nice if they mentioned this ahead of time...could save me and many others a lot of time! http://www.youtube.com/watch?v=-asduq8Dh8A http://www.youtube.com/watch?v=XFFswo7QxSo Last edited by n3985; 05-06-2012 at 03:02 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

05-05-2012, 05:19 AM	#2
SloopJohnB@mac.com AudiWorld Super User 2002 Audi S6 Join Date: Oct 2002 Posts: 4,121	I put my DICE adaptor just outside the glovebox, above the glovebox, bolted to the glovebox. Handy because I had to replace the #%% thing once. 02S6