Convertible roof light indicator on when roof it up

lawnerd · 04-28-2012, 07:38 AM

Hi. Anyone else ever have this problem. The dash light that indicates that the convertible roof is being opened is on even though the roof is up and latched?

It started when I put a large package in the passenger seat that may have bumped the top of the roof when I was putting it in the car.

Any ideas on fixes?

lawnerd · 04-29-2012, 03:34 AM

OK. Looks like my problem is the switch which is located on the top of the windshield on the driver's side. When you latch the roof shut the catch on the roof pushes the switch and turns off the dummy light. My switch is either bent or worn so that it is no longer pushed by the catch.

For now I put a piece of aluminum foil on the switch. But I think I might try to reposition it using a small screwdriver.

Anyone else ever have this problem?

Lexx · 07-31-2012, 06:09 PM

have lasted years on our car. Probably can move the switch..or replace it. But tape is free..and been working fine

TaciTrequiem · 08-01-2012, 11:58 PM

I am having the same problem now, can you describe how you applied the electrical tape fix?

lawnerd · 08-05-2012, 06:19 PM

Quote:

Originally Posted by lawnerd

OK. Looks like my problem is the switch which is located on the top of the windshield on the driver's side. When you latch the roof shut the catch on the roof pushes the switch and turns off the dummy light. My switch is either bent or worn so that it is no longer pushed by the catch.

For now I put a piece of aluminum foil on the switch. But I think I might try to reposition it using a small screwdriver.

Anyone else ever have this problem?

I had the same problem. The issue is the switch on the drivers side, where the roof catches. You can try bending the switch with a screwdriver. However, this is what i did. I had one of these new hooks that attaches to a wall or door. It comes with a thick pad with adhesive on one end. I cut this pad to size and attached it to the switch with adhesive. It made the switch thicker, and thus activated when the roof was latched. Problem solved.

Lexx · 08-06-2012, 03:57 PM

enough thickness to shut off the light.

look on the drivers side area on the windshield frame, you will see a switch. just put a piece or 2 or 3 of tape on the switch

04-29-2012, 03:34 AM	#2
lawnerd Audiworld Junior Member Garage is empty, add now Join Date: Apr 2012 Posts: 12	Problem identified! OK. Looks like my problem is the switch which is located on the top of the windshield on the driver's side. When you latch the roof shut the catch on the roof pushes the switch and turns off the dummy light. My switch is either bent or worn so that it is no longer pushed by the catch. For now I put a piece of aluminum foil on the switch. But I think I might try to reposition it using a small screwdriver. Anyone else ever have this problem?

07-31-2012, 06:09 PM	#3
Lexx AudiWorld Senior Member Garage is empty, add now Join Date: Oct 2000 Posts: 1,549	old thread I know.. but same problem.. couple pieces of electrical tape...... have lasted years on our car. Probably can move the switch..or replace it. But tape is free..and been working fine __________________ "At this point, the length of this conversation is way out of proportion with my interest in it." Dan Rydell Sports Night http://www.ttr225.com Mods: GIAC cpu upgrade, 42dd downpipe, poly dogbone bushings, Forge DV VF Engineering Motor + Trans mounts Valeo single mass flywheel and clutch Audi FAQ click here

08-01-2012, 11:58 PM	#4
TaciTrequiem AudiWorld Member Garage is empty, add now Join Date: Mar 2004 Posts: 283	I am having the same problem now, can you describe how you applied the electrical tape fix? __________________ "In vino veritas" doc

08-06-2012, 03:57 PM	#6
Lexx AudiWorld Senior Member Garage is empty, add now Join Date: Oct 2000 Posts: 1,549	apply it to the switch where the top hits the latch from the top. gives it just .... enough thickness to shut off the light. look on the drivers side area on the windshield frame, you will see a switch. just put a piece or 2 or 3 of tape on the switch __________________ "At this point, the length of this conversation is way out of proportion with my interest in it." Dan Rydell Sports Night http://www.ttr225.com Mods: GIAC cpu upgrade, 42dd downpipe, poly dogbone bushings, Forge DV VF Engineering Motor + Trans mounts Valeo single mass flywheel and clutch Audi FAQ click here

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!