transmission removal without lift

onfir3 · 04-26-2012, 06:02 PM

I am contemplating doing this myself vice having to pay for it due to the cost but I don't have a lift availiable to me anymore.
I'm looking at maybe to pull the whole motor and trans combo out the front as basically my only option... has anyone any experience with this? So far I've only found a few walkthroughs using a lift and retaining the engine in place.

This is on a 99 a8 swb with dte trans

Prospeeder · 04-26-2012, 06:19 PM

Very doable. get the car up with stands. Support the engine with a suitable engine support. drain fluid. remove the subframe. Remove the exhaust. Remove the driveshaft at the trans, remove anything attached to the trans including cooler lines. Converter bolts, bellhousing bolts, lower away.

04-26-2012, 06:19 PM	#2
Prospeeder AudiWorld Senior Member Garage is empty, add now Join Date: Aug 2011 Posts: 837	Very doable. get the car up with stands. Support the engine with a suitable engine support. drain fluid. remove the subframe. Remove the exhaust. Remove the driveshaft at the trans, remove anything attached to the trans including cooler lines. Converter bolts, bellhousing bolts, lower away. __________________ 1992 Audi 100 CS Quattro 1990 Audi 200 Avant Turbo Quattro 1991 Audi 200 Turbo 1999 Audi A6 Avant

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!