Driver door wiring harness replacement write-up (lots of pics) - Page 3

x1rider · 11-12-2007, 04:37 PM

Delphingrau3003_Rich · 11-13-2007, 10:56 AM

what kind of crummy design would allow this to happen in the first place?

My hat is off to you, however!

Rich

x1rider · 11-13-2007, 11:02 AM

He says HE never had to change a door wiring harness...

Delphingrau3003_Rich · 11-14-2007, 03:38 AM

diagnosticator1 · 11-14-2007, 11:26 PM

0.5mm red/yellow wire, and provides controller power only. Fuse #37 provides power for the electric window motor, via a 2.5mm red/black wire. So, fuse 22 can be good, while fuse #37, if blown, will result in the window motor not operating. Does everything work except the window motor? If that is true, then recheck fuse #37, or check for +Vbatt at the door controller harness connector T10e, pin/terminal #6.

x1rider · 11-15-2007, 01:28 AM

ruzy · 04-15-2012, 01:45 PM

I had the same problem, I soldered the wires and it's good now; I don't know how long will it last

My problems were: 1. Dome light allways on
2. None of the power windows worked (excluding the sunroof)
3. Power mirror didn't work
4. remote didn't work with driver door

11-13-2007, 10:56 AM	#22
Delphingrau3003_Rich Member Garage is empty, add now Join Date: Jul 2000 Posts: 2,485	Great write-up...the question should be "Why should you even have to do this?" what kind of crummy design would allow this to happen in the first place? My hat is off to you, however! Rich __________________ 2003 Audi A4 3.0 QMS Dolphin/Ebony - now with new T1Rs!!! - and W300s for Winter!!! "Each society gets precisely the amount of crime it is willing to tolerate." Best Buy sucks.

11-13-2007, 11:02 AM	#23
x1rider AudiWorld Super User Garage is empty, add now Join Date: Apr 2006 Posts: 2,962	my father (who drives a Toyota Camry with 165k miles) asked me the same thing... He says HE never had to change a door wiring harness...

11-14-2007, 03:38 AM	#24
Delphingrau3003_Rich Member Garage is empty, add now Join Date: Jul 2000 Posts: 2,485	LOL! My wife's RAV4 w/211K is the same...just noisy! __________________ 2003 Audi A4 3.0 QMS Dolphin/Ebony - now with new T1Rs!!! - and W300s for Winter!!! "Each society gets precisely the amount of crime it is willing to tolerate." Best Buy sucks.

11-14-2007, 11:26 PM	#25
diagnosticator1 AudiWorld Super User Garage is empty, add now Join Date: Oct 2005 Posts: 6,127	Fuse #22 goes to the driver's door control module also, but is connected via a ... 0.5mm red/yellow wire, and provides controller power only. Fuse #37 provides power for the electric window motor, via a 2.5mm red/black wire. So, fuse 22 can be good, while fuse #37, if blown, will result in the window motor not operating. Does everything work except the window motor? If that is true, then recheck fuse #37, or check for +Vbatt at the door controller harness connector T10e, pin/terminal #6.

11-15-2007, 01:28 AM	#26
x1rider AudiWorld Super User Garage is empty, add now Join Date: Apr 2006 Posts: 2,962	ok, I'll check 37

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!

04-15-2012, 01:45 PM	#27
ruzy AudiWorld Newcomer Garage is empty, add now Join Date: Nov 2011 Posts: 1	I had the same problem, I soldered the wires and it's good now; I don't know how long will it last My problems were: 1. Dome light allways on 2. None of the power windows worked (excluding the sunroof) 3. Power mirror didn't work 4. remote didn't work with driver door

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode