audi a7 aftermarket wheel problem

wheelin33 · 04-07-2012, 09:04 AM

I am struggling to get some wheels fit onto my audi a7..

So far I have had two sets of wheels, both with the same problem.

22", Blaque Diamond BD7 and Savini BM3, +35, +32 offsets drilled for Audi A7 (5x112)

Once the front wheels are bolted on, the front wheels (on the spoke, as seen in the pic) hit against the screw on the outside of the brake caliper, which prevent the wheels from being used.

Any suggestions?

The big tire shop used to try to install wheels refuses to use spacers.. So haven't tried that option yet.

Reggie · 04-08-2012, 08:40 AM

You will need spacers. Make sure you get the required spacers for the correct hub size as I think the A7 uses the bigger hubs that audi has gone to.

04-08-2012, 08:40 AM	#2
Reggie AudiWorld Expert 2011 Audi Q5 My Garage Join Date: Mar 2000 Location: Fort Collins Colorado Posts: 30,624	You will need spacers. Make sure you get the required spacers for the correct hub size as I think the A7 uses the bigger hubs that audi has gone to. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!