You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!
Notices
NEW FEATURE at AudiWorld!!! We now have a fully integrated Wiki!!
Check it out!
For full post editing rights, please reply to this thread. Thanks!
For tips on using the forums please visit the following page: Forum Tips Be sure to check out Threaded View!!!
facebook users, please become a fan of AudiWorld's page
We've gotten complaints about spam/virus Private Messages. Any such messages are completely bogus, and should be ignored completely. Read more here.
S4 (B6 & B7 Platforms) DiscussionDiscussion forum for the B6 Audi S4 produced from 2003-2005 And B7 Audi S4 produced from 2005 -2008
I have been a member for sometime, but this is my first post.
I have a completely stock 2005.5 (B7) Audi S4 Quattro. The problem that I am having is tire rub on both the front tires. The front end almost seems to move back and forth, then forcing the tires to rub on the control arms. I have big gouges taken out of the inside of both of the front tires.
I have a mechanic looking at it now, but he tells me that all the bushings in the control arms look good and are getting no significant play. The mechanic has suggested to replace one tie rod and do an alignment.
Does anyone out there have any other ideas, this seems like having a front end with 2-3 inches of movement can be a serious problem.
I also had Audi do a standard safety inspection after they did some work no more than a month ago and they did not say anything about frame damage, etc. Also, the car has never been in an accident to my knowledge.