1998 30v 2.8l Camshaft Alignment

brijan · 03-21-2012, 02:52 PM

OK...so I read all the threads on camshaft alignment, but am still a little confused. I have removed and replaced both banks of cams. Bank 1 is at exactly 16 rollers between the marks on the cams. Bank 2 is at 14.5-15 rollers. Bank 2 lines up perfectly with the marks on the bearing caps, but bank 1 is off on the intake side by a tooth or two. I have done it this way according to the advice on the other threads. Here is the BIG question.....Are there supposed to be 16 rollers between the marks on the camshafts on bank 1 or are the marks supposed to line up with the bearing caps, because both is impossible.

Prospeeder · 03-24-2012, 06:03 PM

This might help. They are both just like this.

03-24-2012, 06:03 PM	#2
Prospeeder AudiWorld Senior Member Garage is empty, add now Join Date: Aug 2011 Posts: 837	This might help. They are both just like this. __________________ 1992 Audi 100 CS Quattro 1990 Audi 200 Avant Turbo Quattro 1991 Audi 200 Turbo 1999 Audi A6 Avant

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to AudiWorld!
		Welcome to AudiWorld.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join AudiWorld.com today!