Any way to disable the TPMS?

JeffW · 12-31-2005, 02:27 PM

I just picked up a new S4 that has the tire pressure monitoring system. My winter wheels don't have sensors, and I'd rather not spend the money and hassle with them right now.

Any way to disable the TPMS so the alarm in the DIS goes away?

thanks!

Uwe@Ross-Tech.com · 12-31-2005, 03:10 PM

Select -> 17-Instruments -> Adaptation -> Channel 61.

Subtract 512 from whatever value you find there.

Let us know if it works..:-)

-Uwe-

JeffW · 01-01-2006, 04:57 PM

JeffW · 01-01-2006, 07:02 PM

Uwe@Ross-Tech.com · 01-01-2006, 07:32 PM

Long Coding Helper included with the version 512 of VAG-COM will make this MUCH easier than trying to twiddle the correct but "by hand".

Let us know if it works.

-Uwe-

http://www.ross-tech.com/vag-com/tou...en.html#helper

JeffW · 01-01-2006, 07:34 PM

Thanks for your help!

CtrlAltDel · 10-26-2008, 04:36 PM

2004 A8L and my MMI is updated so I used this:

Chassis> 65-Tire Pressue> Disable
Original was 0232125 and changed it to 0202125

Disbale TPMS for my winter wheels w/o sensors.

Thanks Uwe and team

S5X · 11-23-2008, 04:39 AM

05whtaudia6 · 05-06-2009, 03:20 AM

Uwe; I was able to remove the TPMS from the MMI Car setup settings (Control Head Front (HIGH) 07, Channel 001: removed 16 from 5394 to 5378) ; but could use some help on eliminating it from alarming. |CHASIS| |65| current value 0062221. Any advice would be appreciated. By the way it is for a 2008 A6.

0?xxxxx: Data Carrier
- 0 = 1 Antenna @ 433 MHz (Basis / PR-7K7)
- 1 = 1 Antenna @ 315 MHz (Basis / PR-7K8)
- 2 = 1 Antenna + 4 Trigger @ 433 MHz (High / PR-7K3)
- 3 = 1 Antenna + 4 Trigger @ 315 MHz (High / PR-7K4)
0x?xxxx: Type
- 0 = Rest of World (RoW)
- 4 = USA
- +1 = Emergency Mode (Run Flat Tires)
- +2 = Extra Load
0xx?xxx: Front Axle (Partial Loaded) I
- 1 = 1.x bar
- 2 = 2.x bar
- 3 = 3.x bar
0xxx?xx: Front Axle (Partial Loaded) II
- 0 = x.0 bar
- 1 = x.1 bar
- 2 = x.2 bar
- 3 = x.3 bar
- 4 = x.4 bar
- 5 = x.5 bar
- 6 = x.6 bar
- 7 = x.7 bar
- 8 = x.8 bar
- 9 = x.9 bar
0xxxx?x: Rear Axle (Partial Loaded) I
- 1 = 1.x bar
- 2 = 2.x bar
- 3 = 3.x bar
0xxxxx?: Rear Axle (Partial Loaded) II
- 0 = x.0 bar
- 1 = x.1 bar
- 2 = x.2 bar
- 3 = x.3 bar
- 4 = x.4 bar
- 5 = x.5 bar
- 6 = x.6 bar
- 7 = x.7 bar
- 8 = x.8 bar
- 9 = x.9 bar

12-31-2005, 02:27 PM	#1
JeffW AudiWorld Senior Member Account #: 4756 Join Date: Apr 2000 Posts: 1,649	Any way to disable the TPMS? I just picked up a new S4 that has the tire pressure monitoring system. My winter wheels don't have sensors, and I'd rather not spend the money and hassle with them right now. Any way to disable the TPMS so the alarm in the DIS goes away? thanks! __________________ On the Street: 2006 Imola Avant S4 with everything but sunshades On the Track: 1995 IT Miata To the Track: 1997 Freightliner FL60 Car Hauler Gone but not forgotten: 1997 A4, 2000 TT, 2004 S4

12-31-2005, 03:10 PM	#2
Uwe@Ross-Tech.com Audiworld Premium Sponsor Account #: 9886 Join Date: Sep 2000 Posts: 2,004	Maybe. Try this: Select -> 17-Instruments -> Adaptation -> Channel 61. Subtract 512 from whatever value you find there. Let us know if it works..:-) -Uwe- __________________ http://www.Ross-Tech.com

01-01-2006, 04:57 PM	#3
JeffW AudiWorld Senior Member Account #: 4756 Join Date: Apr 2000 Posts: 1,649	That worked! Thanks! __________________ On the Street: 2006 Imola Avant S4 with everything but sunshades On the Track: 1995 IT Miata To the Track: 1997 Freightliner FL60 Car Hauler Gone but not forgotten: 1997 A4, 2000 TT, 2004 S4

01-01-2006, 07:02 PM	#4
JeffW AudiWorld Senior Member Account #: 4756 Join Date: Apr 2000 Posts: 1,649	Can it be disabled on a 2006 A6 as well? __________________ On the Street: 2006 Imola Avant S4 with everything but sunshades On the Track: 1995 IT Miata To the Track: 1997 Freightliner FL60 Car Hauler Gone but not forgotten: 1997 A4, 2000 TT, 2004 S4

01-01-2006, 07:32 PM	#5
Uwe@Ross-Tech.com Audiworld Premium Sponsor Account #: 9886 Join Date: Sep 2000 Posts: 2,004	On C6 A6 it should be in Long Coding in the CAN Gateway, Byte 03 Bit 0 Long Coding Helper included with the version 512 of VAG-COM will make this MUCH easier than trying to twiddle the correct but "by hand". Let us know if it works. -Uwe- http://www.ross-tech.com/vag-com/tou...en.html#helper __________________ http://www.Ross-Tech.com

01-01-2006, 07:34 PM	#6
JeffW AudiWorld Senior Member Account #: 4756 Join Date: Apr 2000 Posts: 1,649	Cool! I'll pass that along to my friend! Thanks for your help! __________________ On the Street: 2006 Imola Avant S4 with everything but sunshades On the Track: 1995 IT Miata To the Track: 1997 Freightliner FL60 Car Hauler Gone but not forgotten: 1997 A4, 2000 TT, 2004 S4

10-26-2008, 04:36 PM	#7
CtrlAltDel New Member Account #: 112771 Join Date: Aug 2006 Posts: 7	Re: That worked! Thanks! 2004 A8L and my MMI is updated so I used this: Chassis> 65-Tire Pressue> Disable Original was 0232125 and changed it to 0202125 Disbale TPMS for my winter wheels w/o sensors. Thanks Uwe and team __________________ 2003 Silver S6 Avant 2004 Oyster Grey A8L

11-23-2008, 04:39 AM	#8
S5X New Member Account #: 89942 Join Date: Mar 2005 Posts: 194	Tried that. There is nothing in channel 61.

05-06-2009, 03:20 AM	#9
05whtaudia6 Audiworld Junior Member Account #: 108260 Join Date: May 2006 Location: Bergen County, NJ Posts: 428	Uwe; I was able to remove the TPMS from the MMI Car setup settings (Control Head Front (HIGH) 07, Channel 001: removed 16 from 5394 to 5378) ; but could use some help on eliminating it from alarming. \|CHASIS\| \|65\| current value 0062221. Any advice would be appreciated. By the way it is for a 2008 A6. 0?xxxxx: Data Carrier 0 = 1 Antenna @ 433 MHz (Basis / PR-7K7) 1 = 1 Antenna @ 315 MHz (Basis / PR-7K8) 2 = 1 Antenna + 4 Trigger @ 433 MHz (High / PR-7K3) 3 = 1 Antenna + 4 Trigger @ 315 MHz (High / PR-7K4) 0x?xxxx: Type 0 = Rest of World (RoW) 4 = USA +1 = Emergency Mode (Run Flat Tires) +2 = Extra Load 0xx?xxx: Front Axle (Partial Loaded) I 1 = 1.x bar 2 = 2.x bar 3 = 3.x bar 0xxx?xx: Front Axle (Partial Loaded) II 0 = x.0 bar 1 = x.1 bar 2 = x.2 bar 3 = x.3 bar 4 = x.4 bar 5 = x.5 bar 6 = x.6 bar 7 = x.7 bar 8 = x.8 bar 9 = x.9 bar 0xxxx?x: Rear Axle (Partial Loaded) I 1 = 1.x bar 2 = 2.x bar 3 = 3.x bar 0xxxxx?: Rear Axle (Partial Loaded) II 0 = x.0 bar 1 = x.1 bar 2 = x.2 bar 3 = x.3 bar 4 = x.4 bar 5 = x.5 bar 6 = x.6 bar 7 = x.7 bar 8 = x.8 bar 9 = x.9 bar __________________ 2005 Artic White A6 3.2 Last edited by 05whtaudia6; 05-06-2009 at 03:40 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search