1.8T vacuum tubing diagram despirately needed!

[bsewall]

Hello. Can somebody please e-mail me with the vacuum tubing diagram for a '97 A4 1.8T. I'm removing my boost controller and trying to hook the vacuum tubing up to the stock configuration so I can run with a chip. I need a diagram for the turbo and blow off valve hook up to the engine and car. Thanks a lot!

[James R.]

Hope this helps...I assume this is what you were looking for???

1-EVAP canister

2-From fuel tank

3-Evaporative Emission (EVAP) canister purge regulator valve -N80-

4-Check-valve for EVAP canister

Between EVAP canister and intake manifold before turbocharger

Installation position (light/dark side): Arrow points in direction of flow, as shown

5-Air cleaner

6-Turbocharger

Check boost pressure page 21-46

7-Combination valve for secondary air injection (AIR)

8-Fuel pressure regulator

9-To power brake booster

10-Check valve

Installation position (light/dark side): Arrow points in direction of flow, as shown

11-Vacuum booster

12-To Leak Detection Pump (LDP)

13-Vacuum reservoir

14-Distributor piece

15-Check valve

Installation position (light/dark side): Arrow points in direction of flow, as shown

16-Secondary Air Injection (AIR) solenoid valve -N112-

17-Crankcase vent

18-Check valve

Installation position (light/dark side): Arrow points in direction of flow, as shown

19-To tank Leak Detection Pump (LDP) -V144-

20-Check valve

Installation position (light/dark side): Arrow points in direction of flow, as shown

21-Charge air cooler

With charge air pressure sensor -G31-

22-Throttle valve control module -J338-

23-Recirculating valve for turbocharger -N249-

Checking page 21-40

24-Intake manifold

With Intake Air Temperature (IAT) sensor -G42

25-Pressure unit for boost pressure regulation

26-Wastegate bypass regulator valve -N75-

27-Mechanical recirculation valve

Checking page 21-38

28-Pressure control valve for crankcase ventilation

29-Secondary Air Injection (AIR) pump motor -V101-
Regards,

James R.

2001 A4 1.8TQMSX-ESP On order, arrives Sept/Oct if I'm lucky.

For sale 24,500 all mods listed plus all orig parts including turbo included in this price.

99 1.8TMS (Neuspeed K04, 5 Bar FPR, Beru Ultra X Plugs, K&N Filter, Remus Exhaust, S4 Wheel Well Liner Mod, Bilstein Sport Shocks, Neuspeed Sport Springs, Neuspeed Front Anti Sway, Brembo Rotors, Mintex Red Box, Ronal R-7's 17", 225/45/R17 Bridgestone S02 PP, Smartire (neat gimmick), Greddy Turbo Timer, European Projectors, Clear Sides and Full Tint...)

[bsewall]

[James R.]

[James R.]

[bsewall]

James-
Where do you get this great stuff from? This is awesome. By chance, do you have the ECU maps for the 1.8t? I need the maps eventually to hook up my A'PEXi Super AVC-R boost controller. Mostly need the maps to hook up the RPM monitor (I think). Thanks again!