StgIII Awe fueling kit VS Asp Fueling kit.. please chime in with reasons! - Page 3

Imolavirus@BuehnEngineering · 03-02-2006, 10:12 PM

ok, it was misleading for you not to mention your other mods, temperature, and favorite color. happy?

box_of_partS4 · 03-02-2006, 10:19 PM

I'm 100% behind it.

Just to make people aware, you know? If somebody thinks they can get 459 on pump, whoo boy they are going to be pissed when they get 350.

box_of_partS4 · 03-02-2006, 10:24 PM

I'm not kidding.

Get some stiffer springs in there too...holy wheel gap Batman! =)

box_of_partS4 · 03-02-2006, 10:29 PM

box_of_partS4 · 03-02-2006, 10:40 PM

Not saying it doesn't happen, but I see way more ~350 posts than ~400 posts.

box_of_partS4 · 03-02-2006, 10:56 PM

I'm sure he could chime in.

~~Mark@AutoSpeed~~ · 03-03-2006, 07:22 AM

The price of the K04 Fueling Package is $2199

Our K04 Fueling Package consists of the following items:

[1] CNC 85mm MAF Housing for Stock Air Box, Uses Hitachi Sensor Only
[1] RS4 MAF Hose
[2] MAF Hose Clamps
[6] Delphi 440cc/min, (42lb/min) Flow Matched Injectors
[4] Phenolic Fuel Rail Spacers
[4] Fuel Rail Stainless Hardware
[6] Bosch Platin F5DP0R Spark Plugs
[1] Upgraded MAP Sensor
[1] MAP Sensor CNC Adapter Plate
[2] MAP Sensor Stainless Hardware
[1] MAP Sensor Wiring Plug
[3] Heat Shrink Sleeves
[1] ASP K04 Performance Software

Some specifics regarding our software:

-The boost requests are re-mapped to deliver a quick 24psi peak to 21psi taper by redline. The 24psi is not sustained and occurs only at maximum requested load to get your vehicle moving.

-Increased Ignition Timing for Better Performance

-Redline is set to 7,100rpm vs. Stock 6,800rpm

-Speed Limiter is Removed

-Fuel Consumption Gauge is Recalibrated to the New Injector Flowrates

-Check Engine Light (CEL) is disabled to Allow use of our ASP Race Pipes

-ReScaling of MAP Sensor to Accurately Display Pressure Values > 22psi

-Allows use of 91 Octane

Performance is very strong with our Package, see Dyno Chart

It is important to note that a stock S4 produces approximately 175whp on this Dyno Dynamics dyno, owned by Chicago Performance & Tuning (They are an Authorized ASP Center) which are known to output "low" numbers. Our kit generates approx. 347whp and 400ft-lbs of wTQ. The closest competitor's kit highest numbers ever dyno'd there was approx. 320whp.

Lastly if at any time you need support and would like revisions to your software, we can perform the Motronic programming in-house, onsite. We do not rely on other tuners to make these programming changes for us.

Hope this helps, I encourage you to contact us by phone if you need and additional information.

dscottjr · 03-03-2006, 07:27 AM

Nick Gustas · 03-03-2006, 08:42 AM

I have a set of those injectors in a box out in the garage too

dscottjr · 03-03-2006, 08:49 AM

03-02-2006, 10:12 PM	#21
Imolavirus@BuehnEngineering Elder Member Account #: 33927 Join Date: Mar 2002 Posts: 17,986	where did mike come into this thread? ok, it was misleading for you not to mention your other mods, temperature, and favorite color. happy? __________________ -Jacob ^^^CLICK SIG FOR BUEHN ENGINEERING WEBSITE^^^ <big><big>Website Here!!!</big></big> <big>Items For Sale</big>

03-02-2006, 10:19 PM	#22
box_of_partS4 Member Account #: 75592 Join Date: May 2004 Posts: 3,982	No argument there. Awesome race gas numbers. As long as you mention the race gas... I'm 100% behind it. Just to make people aware, you know? If somebody thinks they can get 459 on pump, whoo boy they are going to be pissed when they get 350.

03-02-2006, 10:24 PM	#23
box_of_partS4 Member Account #: 75592 Join Date: May 2004 Posts: 3,982	Take some diuretic pills and laxatives, give yourself a 20-30lb diet...That'll help you... I'm not kidding. Get some stiffer springs in there too...holy wheel gap Batman! =)

03-02-2006, 10:29 PM	#24
box_of_partS4 Member Account #: 75592 Join Date: May 2004 Posts: 3,982	Straight 94 octane pump.

03-02-2006, 10:40 PM	#25
box_of_partS4 Member Account #: 75592 Join Date: May 2004 Posts: 3,982	That's still above average...most people with AWE kits post ~350 whp. Not saying it doesn't happen, but I see way more ~350 posts than ~400 posts.

03-02-2006, 10:56 PM	#26
box_of_partS4 Member Account #: 75592 Join Date: May 2004 Posts: 3,982	I believe that was unrelated to the dyno run. That was after the dyno run, before his TB failure I'm sure he could chime in.

03-03-2006, 07:22 AM	#27
~~Mark@AutoSpeed~~ Banned Account #: 93546 Join Date: Jun 2005 Posts: 1,745	Hello here are the specifics to our Performance Package Inside... The price of the K04 Fueling Package is $2199 Our K04 Fueling Package consists of the following items: [1] CNC 85mm MAF Housing for Stock Air Box, Uses Hitachi Sensor Only [1] RS4 MAF Hose [2] MAF Hose Clamps [6] Delphi 440cc/min, (42lb/min) Flow Matched Injectors [4] Phenolic Fuel Rail Spacers [4] Fuel Rail Stainless Hardware [6] Bosch Platin F5DP0R Spark Plugs [1] Upgraded MAP Sensor [1] MAP Sensor CNC Adapter Plate [2] MAP Sensor Stainless Hardware [1] MAP Sensor Wiring Plug [3] Heat Shrink Sleeves [1] ASP K04 Performance Software Some specifics regarding our software: -The boost requests are re-mapped to deliver a quick 24psi peak to 21psi taper by redline. The 24psi is not sustained and occurs only at maximum requested load to get your vehicle moving. -Increased Ignition Timing for Better Performance -Redline is set to 7,100rpm vs. Stock 6,800rpm -Speed Limiter is Removed -Fuel Consumption Gauge is Recalibrated to the New Injector Flowrates -Check Engine Light (CEL) is disabled to Allow use of our ASP Race Pipes -ReScaling of MAP Sensor to Accurately Display Pressure Values > 22psi -Allows use of 91 Octane Performance is very strong with our Package, see Dyno Chart It is important to note that a stock S4 produces approximately 175whp on this Dyno Dynamics dyno, owned by Chicago Performance & Tuning (They are an Authorized ASP Center) which are known to output "low" numbers. Our kit generates approx. 347whp and 400ft-lbs of wTQ. The closest competitor's kit highest numbers ever dyno'd there was approx. 320whp. Lastly if at any time you need support and would like revisions to your software, we can perform the Motronic programming in-house, onsite. We do not rely on other tuners to make these programming changes for us. Hope this helps, I encourage you to contact us by phone if you need and additional information.

03-03-2006, 07:27 AM	#28
dscottjr Member Account #: 42392 Join Date: Sep 2002 Posts: 14,595	Upgraded map sensor? Is this new to the kit? 3bar piece? More details? Thx! __________________ 00 S4, Euro spider hose mod!! 04 allroad, needs rs6 intercoolers, k04s and a cargo box...

03-03-2006, 08:42 AM	#29
Nick Gustas Senior Member Account #: 3094 Join Date: Mar 2000 Posts: 7,470	Yes please.. (ears perking up) I have a set of those injectors in a box out in the garage too

03-03-2006, 08:49 AM	#30
dscottjr Member Account #: 42392 Join Date: Sep 2002 Posts: 14,595	Got video:-p __________________ 00 S4, Euro spider hose mod!! 04 allroad, needs rs6 intercoolers, k04s and a cargo box...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


Discussion Forums:	Advanced Search